[PATCH v4 01/10] net/iavf: keep device stopped if start fails

[Anatoly Burakov]

Currently, `iavf_dev_start()` clears `adapter->stopped` before several
operations that can fail. A subsequent `iavf_dev_stop()` then disables
interrupts and stops and resets queues even though startup did not
complete.

Mark the adapter running only after startup succeeds, and return early
from stop when it is already stopped.

Fixes: 69dd4c3d0898 ("net/avf: enable queue and device")
Cc: stable at dpdk.org

Signed-off-by: Anatoly Burakov <anatoly.burakov at intel.com>
---
 drivers/net/intel/iavf/iavf_ethdev.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/net/intel/iavf/iavf_ethdev.c b/drivers/net/intel/iavf/iavf_ethdev.c
index 9e0e13d4992..1ec9e946fc4 100644
--- a/drivers/net/intel/iavf/iavf_ethdev.c
+++ b/drivers/net/intel/iavf/iavf_ethdev.c
@@ -1039,8 +1039,6 @@ iavf_dev_start(struct rte_eth_dev *dev)
 	if (adapter->closed)
 		return -1;
 
-	adapter->stopped = 0;
-
 	vf->max_pkt_len = dev->data->mtu + IAVF_ETH_OVERHEAD;
 	vf->num_queue_pairs = RTE_MAX(dev->data->nb_rx_queues,
 				      dev->data->nb_tx_queues);
@@ -1112,6 +1110,7 @@ iavf_dev_start(struct rte_eth_dev *dev)
 	}
 
 	iavf_phc_sync_alarm_start(dev);
+	adapter->stopped = 0;
 
 	/* An explicit start supersedes any pending deferred start */
 	vf->start_pending = false;
@@ -1135,13 +1134,13 @@ iavf_dev_stop(struct rte_eth_dev *dev)
 	if (adapter->closed)
 		return -1;
 
+	if (adapter->stopped == 1)
+		return 0;
+
 	if (!(vf->vf_res->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_WB_ON_ITR) &&
 	    dev->data->dev_conf.intr_conf.rxq != 0)
 		rte_intr_disable(intr_handle);
 
-	if (adapter->stopped == 1)
-		return 0;
-
 	iavf_phc_sync_alarm_stop(dev);
 
 	/* Disable the interrupt for Rx */
-- 
2.52.0