[spp] [PATCH 3/3] docs:delete unsupported SPP VF Secondary Command

[Yasufumi Ogawa]

On 2018/06/08 18:01, x-fn-spp at sl.ntt-tx.co.jp wrote:
> From: Hiroyuki Nakamura <nakamura.hiroyuki at po.ntt-tx.co.jp>
> 
> This commit delete unsupported SPP VF Secondary Command.
This patch looks good and has no problems, but subject is not appropriate. Space should be added after 'docs:'. Could you think 
to change the subject to "docs: delete unsupported SPP VF commands" simply.

Thanks
> 
> Signed-off-by: Hiroyuki Nakamura <nakamura.hiroyuki at po.ntt-tx.co.jp>
> Signed-off-by: Naoki Takada <takada.naoki at lab.ntt.co.jp>
> ---
>   docs/guides/spp_vf/commands/secondary.rst | 102 ------------------------------
>   1 file changed, 102 deletions(-)
> 
> diff --git a/docs/guides/spp_vf/commands/secondary.rst b/docs/guides/spp_vf/commands/secondary.rst
> index 564e9af..19e594c 100644
> --- a/docs/guides/spp_vf/commands/secondary.rst
> +++ b/docs/guides/spp_vf/commands/secondary.rst
> @@ -282,105 +282,3 @@ before running ``flush`` command.
>   .. code-block:: console
>   
>       spp > sec 1;cancel
> -
> -
> -add
> ----
> -
> -Add a PMD to the secondary with resource ID.
> -
> -Adding ring 0 by
> -
> -.. code-block:: console
> -
> -    spp> sec 1;add ring 0
> -    recv:7:{addring0}
> -
> -Or adding vhost 0 by
> -
> -.. code-block:: console
> -
> -    spp> sec 1;add vhost 0
> -    recv:7:{addvhost0}
> -
> -
> -patch
> -------
> -
> -Create a path between two ports, source and destination ports.
> -Port ID is referred by status sub commnad.
> -This command just creates path and does not start forwarding.
> -
> -.. code-block:: console
> -
> -    spp > sec 1;patch 0 2
> -    recv:7:{patch02}
> -
> -
> -forward
> --------
> -
> -Start forwarding.
> -
> -.. code-block:: console
> -
> -    spp > sec 1;forward
> -    recv:7:{start forwarding}
> -
> -Running status is changed from ``Idling`` to ``Running`` by
> -executing it.
> -
> -.. code-block:: console
> -
> -    spp > sec 1;status
> -    recv:7:{Client ID 1 Running
> -    1
> -    port id: 0,on,PHY,outport: none
> -    port id: 1,on,PHY,outport: none
> -    }
> -
> -
> -stop
> -----
> -
> -Stop forwarding.
> -
> -.. code-block:: console
> -
> -    spp > sec 1;stop
> -    recv:7:{start forwarding}
> -
> -Running status is changed from ``Running`` to ``Idling`` by
> -executing it.
> -
> -.. code-block:: console
> -
> -    spp > sec 1;status
> -    recv:7:{Client ID 1 Running
> -    1
> -    port id: 0,on,PHY,outport: none
> -    port id: 1,on,PHY,outport: none
> -    }
> -
> -
> -del
> ----
> -
> -Delete PMD added by ``add`` subcommand from the secondary.
> -
> -.. code-block:: console
> -
> -    spp> sec 1;del ring 0
> -    recv:7:{delring0}
> -
> -
> -exit
> -----
> -
> -Terminate the secondary. For terminating all secondaries, use ``bye sec``
> -command instead of it.
> -
> -.. code-block:: console
> -
> -    spp> sec 1;exit
> -    recv:7:{delring0}
>