patch 'net/mlx5: fix probing to allow BlueField Socket Direct' has been queued to stable release 25.11.1
Kevin Traynor
ktraynor at redhat.com
Thu Mar 19 11:02:32 CET 2026
Hi,
FYI, your patch has been queued to stable release 25.11.1
Note it hasn't been pushed to http://dpdk.org/browse/dpdk-stable yet.
It will be pushed if I get no objections before 03/23/26. So please
shout if anyone has objections.
Also note that after the patch there's a diff of the upstream commit vs the
patch applied to the branch. This will indicate if there was any rebasing
needed to apply to the stable branch. If there were code changes for rebasing
(ie: not only metadata diffs), please double check that the rebase was
correctly done.
Queued patches are on a temporary branch at:
https://github.com/kevintraynor/dpdk-stable
This queued commit can be viewed at:
https://github.com/kevintraynor/dpdk-stable/commit/4e22d68ee129a9a8cdb46bd84c0de022dc93c1a8
Thanks.
Kevin
---
>From 4e22d68ee129a9a8cdb46bd84c0de022dc93c1a8 Mon Sep 17 00:00:00 2001
From: Dariusz Sosnowski <dsosnowski at nvidia.com>
Date: Wed, 4 Mar 2026 11:57:18 +0100
Subject: [PATCH] net/mlx5: fix probing to allow BlueField Socket Direct
[ upstream commit 2f7cdd821b1b4954f18faad0e8b6d9ab41ca3f23 ]
BlueField DPUs with Socket Direct (SD) can be connected to 2 different
CPUs on the host system.
Each host CPU sees 2 PFs.
Each PF is connected to one of the physical ports.
On BlueField DPU ARM Linux netdevs map to PFs/ports as follows:
- p0 and p1 to physical ports 0 and 1 respectively,
- pf0hpf and pf2hpf to CPU0 pf0 and CPU1 pf0 respectively,
- pf1hpf and pf3hpf to CPU0 pf1 and CPU1 pf1 respectively.
There are several possible ways to use such a setup:
1. Single E-Switch (embedded switch) per each CPU PF to
physical port connection.
2. Shared E-Switch for related CPU PFs:
- For example, both pf0hpf and pf2hpf are in the same E-Switch.
3. Multiport E-Switch (MPESW).
Existing probing logic in mlx5 PMD did not support case (2).
In this case there is one physical port (uplink in mlx5 naming)
and 2 host PFs.
On such a setup mlx5 generated port names with the following syntax:
03:00.0_representor_vfX
Because setup was not recognized as neither bond nor MPESW.
Since BlueField with Socket Direct would have 2 host PFs,
such probing logic caused DPDK port name collisions
on the attempt to probe 2 host PFs at the same time.
This patch addresses that by changing probing and naming logic
to be more generic. This is achieved through:
- Adding logic for calculation of number of uplinks and
number of host PFs available on the system.
- Change port name generation logic to be based on these numbers
instead of specific setup type.
- Change representor matching logic during probing
to respect all parameters passed in devargs.
Specifically, controller index, PF index and VF indexes are used.
Fixes: 11c73de9ef63 ("net/mlx5: probe multi-port E-Switch device")
Signed-off-by: Dariusz Sosnowski <dsosnowski at nvidia.com>
Acked-by: Bing Zhao <bingz at nvidia.com>
---
drivers/net/mlx5/linux/mlx5_os.c | 346 ++++++++++++++++++++++---------
drivers/net/mlx5/mlx5.h | 2 +
2 files changed, 245 insertions(+), 103 deletions(-)
diff --git a/drivers/net/mlx5/linux/mlx5_os.c b/drivers/net/mlx5/linux/mlx5_os.c
index 71fadc23fc..a1285a2345 100644
--- a/drivers/net/mlx5/linux/mlx5_os.c
+++ b/drivers/net/mlx5/linux/mlx5_os.c
@@ -1033,4 +1033,173 @@ mlx5_queue_counter_id_prepare(struct rte_eth_dev *dev)
}
+static inline bool
+mlx5_ignore_pf_representor(const struct rte_eth_devargs *eth_da)
+{
+ return (eth_da->flags & RTE_ETH_DEVARG_REPRESENTOR_IGNORE_PF) != 0;
+}
+
+static bool
+is_standard_eswitch(const struct mlx5_dev_spawn_data *spawn)
+{
+ bool is_bond = spawn->pf_bond >= 0;
+
+ return !is_bond && spawn->nb_uplinks <= 1 && spawn->nb_hpfs <= 1;
+}
+
+static bool
+is_hpf(const struct mlx5_dev_spawn_data *spawn)
+{
+ return spawn->info.port_name == -1 &&
+ spawn->info.name_type == MLX5_PHYS_PORT_NAME_TYPE_PFHPF;
+}
+
+static int
+build_port_name(struct rte_device *dpdk_dev,
+ struct mlx5_dev_spawn_data *spawn,
+ char *name,
+ size_t name_sz)
+{
+ bool is_bond = spawn->pf_bond >= 0;
+ int written = 0;
+ int ret;
+
+ ret = snprintf(name, name_sz, "%s", dpdk_dev->name);
+ if (ret < 0)
+ return ret;
+ written += ret;
+ if (written >= (int)name_sz)
+ return written;
+
+ /*
+ * Whenever bond device is detected, include IB device name.
+ * This is kept to keep port naming backward compatible.
+ */
+ if (is_bond) {
+ ret = snprintf(name + written, name_sz - written, "_%s", spawn->phys_dev_name);
+ if (ret < 0)
+ return ret;
+ written += ret;
+ if (written >= (int)name_sz)
+ return written;
+ }
+
+ if (spawn->info.name_type == MLX5_PHYS_PORT_NAME_TYPE_UPLINK) {
+ /* Add port to name if and only if there is more than one uplink. */
+ if (spawn->nb_uplinks <= 1)
+ goto end;
+
+ ret = snprintf(name + written, name_sz - written, "_p%u", spawn->info.port_name);
+ if (ret < 0)
+ return ret;
+ written += ret;
+ if (written >= (int)name_sz)
+ return written;
+ } else if (spawn->info.representor) {
+ /*
+ * If port is a representor, then switchdev has been enabled.
+ * In that case add controller, PF and VF/SF indexes to port name
+ * if at least one of these conditions are met:
+ * 1. Device is a bond (VF-LAG).
+ * 2. There are multiple uplinks (MPESW).
+ * 3. There are multiple host PFs (BlueField socket direct).
+ *
+ * If none of these conditions apply, then it is assumed that
+ * this device manages a single non-shared E-Switch with single controller,
+ * where there is only one uplink/PF and one host PF (on BlueField).
+ */
+ if (!is_standard_eswitch(spawn))
+ ret = snprintf(name + written, name_sz - written,
+ "_representor_c%dpf%d%s%u",
+ spawn->info.ctrl_num,
+ spawn->info.pf_num,
+ spawn->info.name_type ==
+ MLX5_PHYS_PORT_NAME_TYPE_PFSF ? "sf" : "vf",
+ spawn->info.port_name);
+ else
+ ret = snprintf(name + written, name_sz - written, "_representor_%s%u",
+ spawn->info.name_type ==
+ MLX5_PHYS_PORT_NAME_TYPE_PFSF ? "sf" : "vf",
+ spawn->info.port_name);
+ if (ret < 0)
+ return ret;
+ written += ret;
+ if (written >= (int)name_sz)
+ return written;
+ }
+
+end:
+ return written;
+}
+
+static bool
+representor_match_uplink(const struct mlx5_dev_spawn_data *spawn,
+ uint16_t port_name,
+ const struct rte_eth_devargs *eth_da,
+ uint16_t eth_da_pf_num)
+{
+ if (spawn->info.name_type != MLX5_PHYS_PORT_NAME_TYPE_UPLINK)
+ return false;
+ /* One of the uplinks will be a transfer proxy. Must be probed always. */
+ if (spawn->info.master)
+ return true;
+ if (mlx5_ignore_pf_representor(eth_da))
+ return false;
+
+ return port_name == eth_da_pf_num;
+}
+
+static bool
+representor_match_port(const struct mlx5_dev_spawn_data *spawn,
+ const struct rte_eth_devargs *eth_da)
+{
+ for (uint16_t p = 0; p < eth_da->nb_ports; ++p) {
+ uint16_t pf_num = eth_da->ports[p];
+
+ /* PF representor in devargs is interpreted as probing uplink port. */
+ if (eth_da->type == RTE_ETH_REPRESENTOR_PF) {
+ if (representor_match_uplink(spawn, spawn->info.port_name, eth_da, pf_num))
+ return true;
+
+ continue;
+ }
+
+ /* Allow probing related uplink when VF/SF representor is requested. */
+ if ((eth_da->type == RTE_ETH_REPRESENTOR_VF ||
+ eth_da->type == RTE_ETH_REPRESENTOR_SF) &&
+ representor_match_uplink(spawn, spawn->info.pf_num, eth_da, pf_num))
+ return true;
+
+ /* Uplink ports should not be matched against representor_ports. */
+ if (spawn->info.name_type == MLX5_PHYS_PORT_NAME_TYPE_UPLINK)
+ return false;
+
+ for (uint16_t f = 0; f < eth_da->nb_representor_ports; ++f) {
+ uint16_t port_num = eth_da->representor_ports[f];
+ bool pf_num_match;
+ bool rep_num_match;
+
+ /*
+ * In standard E-Switch case, allow probing VFs even if wrong PF index
+ * was provided.
+ */
+ if (is_standard_eswitch(spawn))
+ pf_num_match = true;
+ else
+ pf_num_match = spawn->info.pf_num == pf_num;
+
+ /* Host PF is indicated through VF/SF representor index == -1. */
+ if (is_hpf(spawn))
+ rep_num_match = port_num == UINT16_MAX;
+ else
+ rep_num_match = port_num == spawn->info.port_name;
+
+ if (pf_num_match && rep_num_match)
+ return true;
+ }
+ }
+
+ return false;
+}
+
/**
* Check if representor spawn info match devargs.
@@ -1049,29 +1218,11 @@ mlx5_representor_match(struct mlx5_dev_spawn_data *spawn,
{
struct mlx5_switch_info *switch_info = &spawn->info;
- unsigned int p, f;
- uint16_t id;
- uint16_t repr_id = mlx5_representor_id_encode(switch_info,
- eth_da->type);
+ unsigned int c;
+ bool ignore_ctrl_num = eth_da->nb_mh_controllers == 0 ||
+ switch_info->name_type == MLX5_PHYS_PORT_NAME_TYPE_UPLINK;
- /*
- * Assuming Multiport E-Switch device was detected,
- * if spawned port is an uplink, check if the port
- * was requested through representor devarg.
- */
- if (mlx5_is_probed_port_on_mpesw_device(spawn) &&
- switch_info->name_type == MLX5_PHYS_PORT_NAME_TYPE_UPLINK) {
- for (p = 0; p < eth_da->nb_ports; ++p)
- if (switch_info->port_name == eth_da->ports[p])
- return true;
- rte_errno = EBUSY;
- return false;
- }
switch (eth_da->type) {
case RTE_ETH_REPRESENTOR_PF:
- /*
- * PF representors provided in devargs translate to uplink ports, but
- * if and only if the device is a part of MPESW device.
- */
- if (!mlx5_is_probed_port_on_mpesw_device(spawn)) {
+ if (switch_info->name_type != MLX5_PHYS_PORT_NAME_TYPE_UPLINK) {
rte_errno = EBUSY;
return false;
@@ -1079,8 +1230,7 @@ mlx5_representor_match(struct mlx5_dev_spawn_data *spawn,
break;
case RTE_ETH_REPRESENTOR_SF:
- if (!(spawn->info.port_name == -1 &&
- switch_info->name_type ==
- MLX5_PHYS_PORT_NAME_TYPE_PFHPF) &&
- switch_info->name_type != MLX5_PHYS_PORT_NAME_TYPE_PFSF) {
+ if (!is_hpf(spawn) &&
+ switch_info->name_type != MLX5_PHYS_PORT_NAME_TYPE_PFSF &&
+ switch_info->name_type != MLX5_PHYS_PORT_NAME_TYPE_UPLINK) {
rte_errno = EBUSY;
return false;
@@ -1088,9 +1238,7 @@ mlx5_representor_match(struct mlx5_dev_spawn_data *spawn,
break;
case RTE_ETH_REPRESENTOR_VF:
- /* Allows HPF representor index -1 as exception. */
- if (!(spawn->info.port_name == -1 &&
- switch_info->name_type ==
- MLX5_PHYS_PORT_NAME_TYPE_PFHPF) &&
- switch_info->name_type != MLX5_PHYS_PORT_NAME_TYPE_PFVF) {
+ if (!is_hpf(spawn) &&
+ switch_info->name_type != MLX5_PHYS_PORT_NAME_TYPE_PFVF &&
+ switch_info->name_type != MLX5_PHYS_PORT_NAME_TYPE_UPLINK) {
rte_errno = EBUSY;
return false;
@@ -1105,19 +1253,15 @@ mlx5_representor_match(struct mlx5_dev_spawn_data *spawn,
return false;
}
- /* Check representor ID: */
- for (p = 0; p < eth_da->nb_ports; ++p) {
- if (!mlx5_is_probed_port_on_mpesw_device(spawn) && spawn->pf_bond < 0) {
- /* For non-LAG mode, allow and ignore pf. */
- switch_info->pf_num = eth_da->ports[p];
- repr_id = mlx5_representor_id_encode(switch_info,
- eth_da->type);
- }
- for (f = 0; f < eth_da->nb_representor_ports; ++f) {
- id = MLX5_REPRESENTOR_ID
- (eth_da->ports[p], eth_da->type,
- eth_da->representor_ports[f]);
- if (repr_id == id)
+ if (!ignore_ctrl_num) {
+ for (c = 0; c < eth_da->nb_mh_controllers; ++c) {
+ uint16_t ctrl_num = eth_da->mh_controllers[c];
+
+ if (spawn->info.ctrl_num == ctrl_num &&
+ representor_match_port(spawn, eth_da))
return true;
}
+ } else {
+ if (representor_match_port(spawn, eth_da))
+ return true;
}
rte_errno = EBUSY;
@@ -1171,42 +1315,10 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
return NULL;
/* Build device name. */
- if (spawn->pf_bond >= 0) {
- /* Bonding device. */
- if (!switch_info->representor) {
- err = snprintf(name, sizeof(name), "%s_%s",
- dpdk_dev->name, spawn->phys_dev_name);
- } else {
- err = snprintf(name, sizeof(name), "%s_%s_representor_c%dpf%d%s%u",
- dpdk_dev->name, spawn->phys_dev_name,
- switch_info->ctrl_num,
- switch_info->pf_num,
- switch_info->name_type ==
- MLX5_PHYS_PORT_NAME_TYPE_PFSF ? "sf" : "vf",
- switch_info->port_name);
- }
- } else if (mlx5_is_probed_port_on_mpesw_device(spawn)) {
- /* MPESW device. */
- if (switch_info->name_type == MLX5_PHYS_PORT_NAME_TYPE_UPLINK) {
- err = snprintf(name, sizeof(name), "%s_p%d",
- dpdk_dev->name, spawn->mpesw_port);
- } else {
- err = snprintf(name, sizeof(name), "%s_representor_c%dpf%d%s%u",
- dpdk_dev->name,
- switch_info->ctrl_num,
- switch_info->pf_num,
- switch_info->name_type ==
- MLX5_PHYS_PORT_NAME_TYPE_PFSF ? "sf" : "vf",
- switch_info->port_name);
- }
- } else {
- /* Single device. */
- if (!switch_info->representor)
- strlcpy(name, dpdk_dev->name, sizeof(name));
- else
- err = snprintf(name, sizeof(name), "%s_representor_%s%u",
- dpdk_dev->name,
- switch_info->name_type ==
- MLX5_PHYS_PORT_NAME_TYPE_PFSF ? "sf" : "vf",
- switch_info->port_name);
+ err = build_port_name(dpdk_dev, spawn, name, sizeof(name));
+ if (err < 0) {
+ DRV_LOG(ERR, "Failed to build port name for IB device %s/%u",
+ spawn->phys_dev_name, spawn->phys_port);
+ rte_errno = EINVAL;
+ return NULL;
}
if (err >= (int)sizeof(name))
@@ -2283,8 +2395,43 @@ mlx5_device_mpesw_pci_match(struct ibv_device *ibv,
}
-static inline bool
-mlx5_ignore_pf_representor(const struct rte_eth_devargs *eth_da)
+static void
+calc_nb_uplinks_hpfs(struct ibv_device **ibv_match,
+ unsigned int nd,
+ struct mlx5_dev_spawn_data *list,
+ unsigned int ns)
{
- return (eth_da->flags & RTE_ETH_DEVARG_REPRESENTOR_IGNORE_PF) != 0;
+ for (unsigned int i = 0; i != nd; i++) {
+ uint32_t nb_uplinks = 0;
+ uint32_t nb_hpfs = 0;
+ uint32_t j;
+
+ for (unsigned int j = 0; j != ns; j++) {
+ if (strcmp(ibv_match[i]->name, list[j].phys_dev_name) != 0)
+ continue;
+
+ if (list[j].info.name_type == MLX5_PHYS_PORT_NAME_TYPE_UPLINK)
+ nb_uplinks++;
+ else if (list[j].info.name_type == MLX5_PHYS_PORT_NAME_TYPE_PFHPF)
+ nb_hpfs++;
+ }
+
+ if (nb_uplinks > 0 || nb_hpfs > 0) {
+ for (j = 0; j != ns; j++) {
+ if (strcmp(ibv_match[i]->name, list[j].phys_dev_name) != 0)
+ continue;
+
+ list[j].nb_uplinks = nb_uplinks;
+ list[j].nb_hpfs = nb_hpfs;
+ }
+
+ DRV_LOG(DEBUG, "IB device %s has %u uplinks, %u host PFs",
+ ibv_match[i]->name,
+ nb_uplinks,
+ nb_hpfs);
+ } else {
+ DRV_LOG(DEBUG, "IB device %s unable to recognize uplinks/host PFs",
+ ibv_match[i]->name);
+ }
+ }
}
@@ -2597,6 +2744,4 @@ mlx5_os_pci_probe_pf(struct mlx5_common_device *cdev,
list[ns].info.master = 1;
list[ns].info.representor = 0;
- } else if (mlx5_ignore_pf_representor(ð_da)) {
- continue;
} else {
list[ns].info.master = 0;
@@ -2615,15 +2760,12 @@ mlx5_os_pci_probe_pf(struct mlx5_common_device *cdev,
case MLX5_PHYS_PORT_NAME_TYPE_PFVF:
case MLX5_PHYS_PORT_NAME_TYPE_PFSF:
- /* Only spawn representors related to the probed PF. */
- if (list[ns].info.pf_num == owner_id) {
- /*
- * Ports of this type have PF index encoded in name,
- * which translate to the related uplink port index.
- */
- list[ns].mpesw_port = list[ns].info.pf_num;
- /* MPESW owner is also saved but not used now. */
- list[ns].info.mpesw_owner = mpesw;
- ns++;
- }
+ /*
+ * Ports of this type have PF index encoded in name,
+ * which translate to the related uplink port index.
+ */
+ list[ns].mpesw_port = list[ns].info.pf_num;
+ /* MPESW owner is also saved but not used now. */
+ list[ns].info.mpesw_owner = mpesw;
+ ns++;
break;
default:
@@ -2759,4 +2901,6 @@ mlx5_os_pci_probe_pf(struct mlx5_common_device *cdev,
}
MLX5_ASSERT(ns);
+ /* Calculate number of uplinks and host PFs for each matched IB device. */
+ calc_nb_uplinks_hpfs(ibv_match, nd, list, ns);
/*
* Sort list to probe devices in natural order for users convenience
@@ -2766,8 +2910,4 @@ mlx5_os_pci_probe_pf(struct mlx5_common_device *cdev,
if (eth_da.type != RTE_ETH_REPRESENTOR_NONE) {
/* Set devargs default values. */
- if (eth_da.nb_mh_controllers == 0) {
- eth_da.nb_mh_controllers = 1;
- eth_da.mh_controllers[0] = 0;
- }
if (eth_da.nb_ports == 0 && ns > 0) {
if (list[0].pf_bond >= 0 && list[0].info.representor)
@@ -2775,5 +2915,5 @@ mlx5_os_pci_probe_pf(struct mlx5_common_device *cdev,
pci_dev->device.devargs->args);
eth_da.nb_ports = 1;
- eth_da.ports[0] = list[0].info.pf_num;
+ eth_da.ports[0] = list[0].info.port_name;
}
if (eth_da.nb_representor_ports == 0) {
diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
index cdc61f6b70..752a856b65 100644
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -216,4 +216,6 @@ struct mlx5_dev_spawn_data {
uint32_t ifindex; /**< Network interface index. */
uint32_t max_port; /**< Device maximal port index. */
+ uint32_t nb_uplinks; /**< Number of uplinks associated with IB device. */
+ uint32_t nb_hpfs; /**< Number of host PFs associated with IB device. */
uint32_t phys_port; /**< Device physical port index. */
int pf_bond; /**< bonding device PF index. < 0 - no bonding */
--
2.53.0
---
Diff of the applied patch vs upstream commit (please double-check if non-empty:
---
--- - 2026-03-19 10:01:08.127351725 +0000
+++ 0034-net-mlx5-fix-probing-to-allow-BlueField-Socket-Direc.patch 2026-03-19 10:01:07.100331261 +0000
@@ -1 +1 @@
-From 2f7cdd821b1b4954f18faad0e8b6d9ab41ca3f23 Mon Sep 17 00:00:00 2001
+From 4e22d68ee129a9a8cdb46bd84c0de022dc93c1a8 Mon Sep 17 00:00:00 2001
@@ -5,0 +6,2 @@
+[ upstream commit 2f7cdd821b1b4954f18faad0e8b6d9ab41ca3f23 ]
+
@@ -49 +50,0 @@
-Cc: stable at dpdk.org
@@ -59 +60 @@
-index 405aa9799c..63325ae845 100644
+index 71fadc23fc..a1285a2345 100644
@@ -62 +63 @@
-@@ -1048,4 +1048,173 @@ mlx5_queue_counter_id_prepare(struct rte_eth_dev *dev)
+@@ -1033,4 +1033,173 @@ mlx5_queue_counter_id_prepare(struct rte_eth_dev *dev)
@@ -236 +237 @@
-@@ -1064,29 +1233,11 @@ mlx5_representor_match(struct mlx5_dev_spawn_data *spawn,
+@@ -1049,29 +1218,11 @@ mlx5_representor_match(struct mlx5_dev_spawn_data *spawn,
@@ -270 +271 @@
-@@ -1094,8 +1245,7 @@ mlx5_representor_match(struct mlx5_dev_spawn_data *spawn,
+@@ -1079,8 +1230,7 @@ mlx5_representor_match(struct mlx5_dev_spawn_data *spawn,
@@ -282 +283 @@
-@@ -1103,9 +1253,7 @@ mlx5_representor_match(struct mlx5_dev_spawn_data *spawn,
+@@ -1088,9 +1238,7 @@ mlx5_representor_match(struct mlx5_dev_spawn_data *spawn,
@@ -295 +296 @@
-@@ -1120,19 +1268,15 @@ mlx5_representor_match(struct mlx5_dev_spawn_data *spawn,
+@@ -1105,19 +1253,15 @@ mlx5_representor_match(struct mlx5_dev_spawn_data *spawn,
@@ -324 +325 @@
-@@ -1186,42 +1330,10 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
+@@ -1171,42 +1315,10 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
@@ -373 +374 @@
-@@ -2298,8 +2410,43 @@ mlx5_device_mpesw_pci_match(struct ibv_device *ibv,
+@@ -2283,8 +2395,43 @@ mlx5_device_mpesw_pci_match(struct ibv_device *ibv,
@@ -420 +421 @@
-@@ -2612,6 +2759,4 @@ mlx5_os_pci_probe_pf(struct mlx5_common_device *cdev,
+@@ -2597,6 +2744,4 @@ mlx5_os_pci_probe_pf(struct mlx5_common_device *cdev,
@@ -427 +428 @@
-@@ -2630,15 +2775,12 @@ mlx5_os_pci_probe_pf(struct mlx5_common_device *cdev,
+@@ -2615,15 +2760,12 @@ mlx5_os_pci_probe_pf(struct mlx5_common_device *cdev,
@@ -451 +452 @@
-@@ -2774,4 +2916,6 @@ mlx5_os_pci_probe_pf(struct mlx5_common_device *cdev,
+@@ -2759,4 +2901,6 @@ mlx5_os_pci_probe_pf(struct mlx5_common_device *cdev,
@@ -458 +459 @@
-@@ -2781,8 +2925,4 @@ mlx5_os_pci_probe_pf(struct mlx5_common_device *cdev,
+@@ -2766,8 +2910,4 @@ mlx5_os_pci_probe_pf(struct mlx5_common_device *cdev,
@@ -467 +468 @@
-@@ -2790,5 +2930,5 @@ mlx5_os_pci_probe_pf(struct mlx5_common_device *cdev,
+@@ -2775,5 +2915,5 @@ mlx5_os_pci_probe_pf(struct mlx5_common_device *cdev,
@@ -475 +476 @@
-index c54266ec26..f69db11735 100644
+index cdc61f6b70..752a856b65 100644
@@ -478 +479 @@
-@@ -215,4 +215,6 @@ struct mlx5_dev_spawn_data {
+@@ -216,4 +216,6 @@ struct mlx5_dev_spawn_data {
More information about the stable
mailing list