[dpdk-test-report] |FAILURE| pw61695[v2, 4/6] net/bnx2x: use common rte bit operation APIs instead
sys_stv at intel.com
sys_stv at intel.com
Wed Oct 23 05:23:15 CEST 2019
Test-Label: Intel-compilation
Test-Status: FAILURE
http://dpdk.org/patch/61695
_Compilation issues_
Submitter: Joyce Kong <joyce.kong at arm.com>
Date: 2019-10-23 02:54:56
Reply_mail: 1571799298-18873-5-git-send-email-joyce.kong at arm.com
DPDK git baseline: Repo:dpdk-next-net, CommitID: 82da28e1053438e8d38faab59852ff72c26232ed
Makefile build Summary: 22 Builds Done, 1 Successful, 21 Failures
Meson build Summary: 7 Builds Done, 3 Successful, 4 Failures
+==============================================+===========+==========+
| Makefile | Meson | Document |
+--------------+------+-------+------+------------+-----------+-----------+----------+
| os | gcc | clang | icc | gcc+shared | gcc+debug | gcc/clang | pdf/html |
+--------------+------+-------+------+------------+-----------+-----------+----------+
| RHEL76-64 | FAIL | | | | | | |
| CENTOS76-64 | FAIL | FAIL | FAIL | FAIL | FAIL | | |
| UB1804-64 | FAIL | FAIL | FAIL | | | FAIL | pass |
| UB1604-32 | pass | | | | | FAIL | |
| UB1904-64 | FAIL | | | | | | |
| UB1604-64 | FAIL | FAIL | | | | | |
| FC30-64 | FAIL | FAIL | | | | pass | |
| WIN10-64 | | | | | | pass | |
| FreeBSD12-64 | FAIL | FAIL | | FAIL | FAIL | FAIL | |
| RHEL80-64 | FAIL | | | | | | |
| SUSE15-64 | FAIL | FAIL | | | | FAIL | |
+--------------+------+-------+------+------------+-----------+-----------+----------+
Test environment and configuration as below:
** Makefile build **
OS: RHEL76-64
Kernel Version: 3.10.0-957.el7.x86_64
CPU info: Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz
GCC Version: gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-36)
Clang Version: NA
x86_64-native-linuxapp-gcc
OS: CENTOS76-64
Kernel Version: 3.10.0-957.27.2.el7.x86_64
CPU info: Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz
GCC Version: gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-36)
Clang Version: 3.4.2 (tags/RELEASE_34/dot2-final)
x86_64-native-linuxapp-gcc+debug
x86_64-native-linuxapp-gcc
x86_64-native-linuxapp-clang
x86_64-native-linuxapp-gcc+shared
x86_64-native-linuxapp-icc
OS: UB1804-64
Kernel Version: 4.15.0-20-generic
CPU info: Intel(R) Xeon(R) CPU E5-2699 v3 @ 2.30GHz
GCC Version: gcc (Ubuntu 7.3.0-16ubuntu3) 7.3.0
Clang Version: 6.0.0-1ubuntu2 (tags/RELEASE_600/final)
x86_64-native-linuxapp-clang
x86_64-native-linuxapp-icc
x86_64-native-linuxapp-gcc
OS: UB1904-64
Kernel Version: 5.0.0-13-generic
CPU info: Intel(R) Xeon(R) CPU E5-2699 v3 @ 2.30GHz
GCC Version: gcc (Ubuntu 8.3.0-6ubuntu1) 8.3.0
Clang Version: 8.0.0-3 (tags/RELEASE_800/final)
x86_64-native-linuxapp-gcc
OS: UB1604-32
Kernel Version: 4.4.0-131-generic
CPU info: Intel(R) Xeon(R) CPU E5-2699 v3 @ 2.30GHz
GCC Version: gcc (Ubuntu 5.4.0-6ubuntu1~16.04.11) 5.4.0 20160609
Clang Version: 3.8.0-2ubuntu4 (tags/RELEASE_380/final)
i686-native-linuxapp-gcc
OS: UB1604-64
Kernel Version: 4.4.0-47-generic
CPU info: Intel(R) Xeon(R) CPU E5-2699 v3 @ 2.30GHz
GCC Version: gcc (Ubuntu 5.4.0-6ubuntu1~16.04.10) 5.4.0 20160609
Clang Version: 3.8.0-2ubuntu4 (tags/RELEASE_380/final)
x86_64-native-linuxapp-clang
x86_64-native-linuxapp-gcc
OS: FC30-64
Kernel Version: 5.1.7-300.fc30.x86_64
CPU info: Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz
GCC Version: gcc (GCC) 9.1.1 20190503 (Red Hat 9.1.1-1)
Clang Version: 8.0.0 (Fedora 8.0.0-1.fc30)
x86_64-native-linuxapp-gcc
x86_64-native-linuxapp-clang
OS: FreeBSD12-64
Kernel Version: 12.0-RC3
CPU info: Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz (2194.98-MHz K8-class CPU)
GCC Version: gcc (FreeBSD Ports Collection) 7.3.0
Clang Version: 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
x86_64-native-bsdapp-gcc+debug
x86_64-native-bsdapp-clang
x86_64-native-bsdapp-gcc+shared
x86_64-native-bsdapp-gcc
OS: RHEL80-64
Kernel Version: 4.18.0-80.el8.x86_64
CPU info: Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz
GCC Version: gcc (GCC) 8.2.1 20180905 (Red Hat 8.2.1-3)
Clang Version: 6.0.1 (tags/RELEASE_601/final)
x86_64-native-linuxapp-gcc
OS: SUSE15-64
Kernel Version: 4.12.14-lp150.11-default
CPU info: Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz
GCC Version: gcc (SUSE Linux) 7.3.1 20180323 [gcc-7-branch revision 258812]
Clang Version: 5.0.1 (tags/RELEASE_501/final 312548)
x86_64-native-linuxapp-gcc
x86_64-native-linuxapp-clang
** Meson build **
OS: UB1804-64
Kernel Version: 4.15.0-20-generic
CPU info: Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz
GCC Version: gcc (Ubuntu 7.3.0-27ubuntu1~18.04) 7.3.0
Clang Version: 6.0.0-1ubuntu2 (tags/RELEASE_600/final)
x86_64-native-linuxapp-doc
build-gcc-static
build-gcc-shared
build-clang-static
build-clang-shared
build-x86-default
OS: UB1604-32
Kernel Version: 4.4.0-131-generic
CPU info: Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz
GCC Version: gcc (Ubuntu 5.4.0-6ubuntu1~16.04.11) 5.4.0 20160609
Clang Version: 3.8.0-2ubuntu4 (tags/RELEASE_380/final)
build-gcc-static
build-gcc-shared
build-clang-static
build-clang-shared
build-x86-default
OS: FC30-64
Kernel Version: 5.0.9-301.fc30.x86_64
CPU info: Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz
GCC Version: gcc (GCC) 9.1.1 20190503 (Red Hat 9.1.1-1)
Clang Version: 8.0.0 (Fedora 8.0.0-1.fc30)
build-gcc-static
build-gcc-shared
build-clang-static
build-clang-shared
build-x86-default
OS: WIN10-64
Kernel Version: N/A
CPU info: N/A
GCC Version: N/A
Clang Version: Clang 8.0.0
x86_64-windows-clang
OS: FreeBSD12-64
Kernel Version: 12.0-RC3
CPU info: Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz (2194.97-MHz K8-class CPU)
GCC Version: gcc (FreeBSD Ports Collection) 7.3.0
Clang Version: 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
build-gcc-static
build-gcc-shared
build-clang-static
build-clang-shared
build-x86-default
OS: SUSE15-64
Kernel Version: 4.12.14-lp150.11-default
CPU info: Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz
GCC Version: gcc (SUSE Linux) 7.3.1 20180323 [gcc-7-branch revision 258812]
Clang Version: 5.0.1 (tags/RELEASE_501/final 312548)
build-gcc-static
build-gcc-shared
build-clang-static
build-clang-shared
build-x86-default
*Make Build Failed #1:
OS: UB1604-64
Target: x86_64-native-linuxapp-clang
^
/tmp/UB1604-64_K4.4.0_Clang3.8.0/x86_64-native-linuxapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/drivers/net/bnx2x/bnx2x.c:1491:17: note: to match this '('
rte_io_set_bit(ECORE_ACCEPT_ANY_VLAN, rx_accept_flags;
^
1 error generated.
/tmp/UB1604-64_K4.4.0_Clang3.8.0/x86_64-native-linuxapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/mk/internal/rte.compile-pre.mk:114: recipe for target 'bnx2x.o' failed
make[6]: *** [bnx2x.o] Error 1
/tmp/UB1604-64_K4.4.0_Clang3.8.0/x86_64-native-linuxapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.subdir.mk:35: recipe for target 'bnx2x' failed
make[5]: *** [bnx2x] Error 2
make[5]: *** Waiting for unfinished jobs....
CC atl_ethdev.o
PMDINFO axgbe_ethdev.o.pmd.c
CC axgbe_ethdev.o.pmd.o
PMDINFO isal_compress_pmd.o.pmd.c
--
CC mc/dpseci.o
== Build drivers/crypto/caam_jr
AR librte_pmd_axgbe.a
INSTALL-LIB librte_pmd_axgbe.a
make[6]: warning: Clock skew detected. Your build may be incomplete.
/tmp/UB1604-64_K4.4.0_Clang3.8.0/x86_64-native-linuxapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.subdir.mk:35: recipe for target 'net' failed
make[4]: *** [net] Error 2
make[4]: *** Waiting for unfinished jobs....
== Build drivers/crypto/virtio
CC caam_jr.o
CC virtqueue.o
== Build drivers/crypto/nitrox
--
PMDINFO dpaa2_sec_dpseci.o.pmd.c
CC dpaa2_sec_dpseci.o.pmd.o
LD dpaa2_sec_dpseci.o
AR librte_pmd_dpaa2_sec.a
INSTALL-LIB librte_pmd_dpaa2_sec.a
/tmp/UB1604-64_K4.4.0_Clang3.8.0/x86_64-native-linuxapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkbuild.mk:46: recipe for target 'drivers' failed
make[3]: *** [drivers] Error 2
/tmp/UB1604-64_K4.4.0_Clang3.8.0/x86_64-native-linuxapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkroot.mk:98: recipe for target 'all' failed
make[2]: *** [all] Error 2
/tmp/UB1604-64_K4.4.0_Clang3.8.0/x86_64-native-linuxapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkinstall.mk:60: recipe for target 'pre_install' failed
make[1]: *** [pre_install] Error 2
/tmp/UB1604-64_K4.4.0_Clang3.8.0/x86_64-native-linuxapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkroot.mk:77: recipe for target 'install' failed
make: *** [install] Error 2
*Make Build Failed #2:
OS: UB1904-64
Target: x86_64-native-linuxapp-gcc
CC avp_ethdev.o.pmd.o
CC e1000_80003es2lan.o
LD avp_ethdev.o
/tmp/UB1904-64_K4.18.0_GCC8.3.0/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/drivers/net/bnx2x/bnx2x.c: At top level:
cc1: warning: unrecognized command line option ‘-Wno-address-of-packed-member’
make[6]: *** [/tmp/UB1904-64_K4.18.0_GCC8.3.0/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/internal/rte.compile-pre.mk:116: bnx2x.o] Error 1
make[5]: *** [/tmp/UB1904-64_K4.18.0_GCC8.3.0/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.subdir.mk:37: bnx2x] Error 2
make[5]: *** Waiting for unfinished jobs....
CC e1000_82540.o
AR librte_pmd_avp.a
INSTALL-LIB librte_pmd_avp.a
CC e1000_82541.o
--
PMDINFO igb_ethdev.o.pmd.c
CC igb_ethdev.o.pmd.o
LD igb_ethdev.o
AR librte_pmd_e1000.a
INSTALL-LIB librte_pmd_e1000.a
make[4]: *** [/tmp/UB1904-64_K4.18.0_GCC8.3.0/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.subdir.mk:35: net] Error 2
make[3]: *** [/tmp/UB1904-64_K4.18.0_GCC8.3.0/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkbuild.mk:46: drivers] Error 2
make[2]: *** [/tmp/UB1904-64_K4.18.0_GCC8.3.0/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkroot.mk:99: all] Error 2
make[1]: *** [/tmp/UB1904-64_K4.18.0_GCC8.3.0/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkinstall.mk:61: pre_install] Error 2
make: *** [/tmp/UB1904-64_K4.18.0_GCC8.3.0/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkroot.mk:77: install] Error 2
*Make Build Failed #3:
OS: UB1804-64
Target: x86_64-native-linuxapp-clang
^
/tmp/UB1804-64_K4.15.0_Clang6.0.0/x86_64-native-linuxapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/drivers/net/bnx2x/bnx2x.c:1491:17: note: to match this '('
rte_io_set_bit(ECORE_ACCEPT_ANY_VLAN, rx_accept_flags;
^
1 error generated.
/tmp/UB1804-64_K4.15.0_Clang6.0.0/x86_64-native-linuxapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/mk/internal/rte.compile-pre.mk:114: recipe for target 'bnx2x.o' failed
make[6]: *** [bnx2x.o] Error 1
/tmp/UB1804-64_K4.15.0_Clang6.0.0/x86_64-native-linuxapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.subdir.mk:35: recipe for target 'bnx2x' failed
make[5]: *** [bnx2x] Error 2
make[5]: *** Waiting for unfinished jobs....
CC qat_sym.o
PMDINFO rte_eth_af_packet.o.pmd.c
CC rte_eth_af_packet.o.pmd.o
PMDINFO isal_compress_pmd.o.pmd.c
--
CC virtqueue.o
CC nitrox_device.o
CC caam_jr_hw.o
AR librte_pmd_atlantic.a
INSTALL-LIB librte_pmd_atlantic.a
/tmp/UB1804-64_K4.15.0_Clang6.0.0/x86_64-native-linuxapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.subdir.mk:35: recipe for target 'net' failed
make[4]: *** [net] Error 2
make[4]: *** Waiting for unfinished jobs....
CC caam_jr_uio.o
PMDINFO nitrox_device.o.pmd.c
AR librte_pmd_crypto_scheduler.a
CC nitrox_device.o.pmd.o
--
PMDINFO dpaa2_sec_dpseci.o.pmd.c
CC dpaa2_sec_dpseci.o.pmd.o
LD dpaa2_sec_dpseci.o
AR librte_pmd_dpaa2_sec.a
INSTALL-LIB librte_pmd_dpaa2_sec.a
/tmp/UB1804-64_K4.15.0_Clang6.0.0/x86_64-native-linuxapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkbuild.mk:46: recipe for target 'drivers' failed
make[3]: *** [drivers] Error 2
/tmp/UB1804-64_K4.15.0_Clang6.0.0/x86_64-native-linuxapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkroot.mk:98: recipe for target 'all' failed
make[2]: *** [all] Error 2
/tmp/UB1804-64_K4.15.0_Clang6.0.0/x86_64-native-linuxapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkinstall.mk:60: recipe for target 'pre_install' failed
make[1]: *** [pre_install] Error 2
/tmp/UB1804-64_K4.15.0_Clang6.0.0/x86_64-native-linuxapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkroot.mk:77: recipe for target 'install' failed
make: *** [install] Error 2
*Make Build Failed #4:
OS: UB1804-64
Target: x86_64-native-linuxapp-icc
rte_io_set_bit(ECORE_ACCEPT_ANY_VLAN, rx_accept_flags;
^
CC rte_eth_bond_api.o
compilation aborted for /tmp/UB1804-64_K4.15.0_ICC19.0.0/x86_64-native-linuxapp-icc/957b981f26114c1783c2b8b217533d45/dpdk/drivers/net/bnx2x/bnx2x.c (code 2)
/tmp/UB1804-64_K4.15.0_ICC19.0.0/x86_64-native-linuxapp-icc/957b981f26114c1783c2b8b217533d45/dpdk/mk/internal/rte.compile-pre.mk:114: recipe for target 'bnx2x.o' failed
make[6]: *** [bnx2x.o] Error 2
/tmp/UB1804-64_K4.15.0_ICC19.0.0/x86_64-native-linuxapp-icc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.subdir.mk:35: recipe for target 'bnx2x' failed
make[5]: *** [bnx2x] Error 2
make[5]: *** Waiting for unfinished jobs....
CC ark_pktchkr.o
CC ark_mpu.o
CC rte_openssl_pmd.o
PMDINFO axgbe_ethdev.o.pmd.c
--
CC nitrox_qp.o
AR librte_pmd_cxgbe.a
INSTALL-LIB librte_pmd_cxgbe.a
PMDINFO nitrox_device.o.pmd.c
CC nitrox_device.o.pmd.o
/tmp/UB1804-64_K4.15.0_ICC19.0.0/x86_64-native-linuxapp-icc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.subdir.mk:35: recipe for target 'net' failed
make[4]: *** [net] Error 2
make[4]: *** Waiting for unfinished jobs....
LD nitrox_device.o
AR librte_pmd_nitrox.a
INSTALL-LIB librte_pmd_nitrox.a
PMDINFO dpaa2_sec_dpseci.o.pmd.c
--
LD dpaa2_sec_dpseci.o
AR librte_pmd_dpaa2_sec.a
INSTALL-LIB librte_pmd_dpaa2_sec.a
AR librte_pmd_octeontx_crypto.a
INSTALL-LIB librte_pmd_octeontx_crypto.a
/tmp/UB1804-64_K4.15.0_ICC19.0.0/x86_64-native-linuxapp-icc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkbuild.mk:46: recipe for target 'drivers' failed
make[3]: *** [drivers] Error 2
/tmp/UB1804-64_K4.15.0_ICC19.0.0/x86_64-native-linuxapp-icc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkroot.mk:98: recipe for target 'all' failed
make[2]: *** [all] Error 2
/tmp/UB1804-64_K4.15.0_ICC19.0.0/x86_64-native-linuxapp-icc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkinstall.mk:60: recipe for target 'pre_install' failed
make[1]: *** [pre_install] Error 2
/tmp/UB1804-64_K4.15.0_ICC19.0.0/x86_64-native-linuxapp-icc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkroot.mk:77: recipe for target 'install' failed
make: *** [install] Error 2
*Make Build Failed #5:
OS: FC30-64
Target: x86_64-native-linuxapp-gcc
1492 | rte_io_set_bit(ECORE_ACCEPT_ANY_VLAN, tx_accept_flags);
| ^
| ;
1493 | }
| ~
make[6]: *** [/tmp/FC30-64_K4.20_GCC9.1.1/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/internal/rte.compile-pre.mk:116: bnx2x.o] Error 1
make[5]: *** [/tmp/FC30-64_K4.20_GCC9.1.1/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.subdir.mk:37: bnx2x] Error 2
make[5]: *** Waiting for unfinished jobs....
== Build drivers/crypto/dpaa_sec
CC axgbe_mdio.o
SYMLINK-FILE include/rte_eth_bond.h
SYMLINK-FILE include/rte_eth_bond_8023ad.h
--
LD caam_jr.o
AR librte_pmd_caam_jr.a
INSTALL-LIB librte_pmd_caam_jr.a
AR librte_pmd_cxgbe.a
INSTALL-LIB librte_pmd_cxgbe.a
make[4]: *** [/tmp/FC30-64_K4.20_GCC9.1.1/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.subdir.mk:35: net] Error 2
make[3]: *** [/tmp/FC30-64_K4.20_GCC9.1.1/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkbuild.mk:46: drivers] Error 2
make[2]: *** [/tmp/FC30-64_K4.20_GCC9.1.1/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkroot.mk:99: all] Error 2
make[1]: *** [/tmp/FC30-64_K4.20_GCC9.1.1/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkinstall.mk:61: pre_install] Error 2
make: *** [/tmp/FC30-64_K4.20_GCC9.1.1/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkroot.mk:77: install] Error 2
*Make Build Failed #6:
OS: RHEL76-64
Target: x86_64-native-linuxapp-gcc
CC rte_eth_bond_api.o
CC axgbe_dev.o
/tmp/RHEL76-64_K3.10.0_GCC4.8.5/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/drivers/net/bnx2x/bnx2x.c: At top level:
cc1: warning: unrecognized command line option "-Wno-address-of-packed-member" [enabled by default]
PMDINFO dpaa2_sec_dpseci.o.pmd.c
make[6]: *** [bnx2x.o] Error 1
make[5]: *** [bnx2x] Error 2
make[5]: *** Waiting for unfinished jobs....
CC dpaa2_sec_dpseci.o.pmd.o
LD dpaa2_sec_dpseci.o
CC rte_eth_bond_pmd.o
CC cxgbe_ethdev.o
--
PMDINFO igb_ethdev.o.pmd.c
CC igb_ethdev.o.pmd.o
LD igb_ethdev.o
AR librte_pmd_e1000.a
INSTALL-LIB librte_pmd_e1000.a
make[4]: *** [net] Error 2
make[3]: *** [drivers] Error 2
make[2]: *** [all] Error 2
make[1]: *** [pre_install] Error 2
make: *** [install] Error 2
*Make Build Failed #7:
OS: SUSE15-64
Target: x86_64-native-linuxapp-gcc
CC rte_eth_bond_api.o
INSTALL-LIB librte_pmd_avp.a
SYMLINK-FILE include/rte_cryptodev_scheduler.h
/tmp/SUSE15-64_K4.12.14_GCC7.3.1/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/drivers/net/bnx2x/bnx2x.c: At top level:
cc1: warning: unrecognized command line option ‘-Wno-address-of-packed-member’
make[6]: *** [/tmp/SUSE15-64_K4.12.14_GCC7.3.1/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/internal/rte.compile-pre.mk:116: bnx2x.o] Error 1
make[5]: *** [/tmp/SUSE15-64_K4.12.14_GCC7.3.1/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.subdir.mk:35: bnx2x] Error 2
make[5]: *** Waiting for unfinished jobs....
CC rte_eth_bond_pmd.o
CC axgbe_rxtx_vec_sse.o
== Build drivers/crypto/null
CC scheduler_pmd.o
--
LD virtio_cryptodev.o
AR librte_pmd_virtio_crypto.a
INSTALL-LIB librte_pmd_virtio_crypto.a
AR librte_pmd_cxgbe.a
INSTALL-LIB librte_pmd_cxgbe.a
make[4]: *** [/tmp/SUSE15-64_K4.12.14_GCC7.3.1/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.subdir.mk:35: net] Error 2
make[3]: *** [/tmp/SUSE15-64_K4.12.14_GCC7.3.1/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkbuild.mk:46: drivers] Error 2
make[2]: *** [/tmp/SUSE15-64_K4.12.14_GCC7.3.1/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkroot.mk:99: all] Error 2
make[1]: *** [/tmp/SUSE15-64_K4.12.14_GCC7.3.1/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkinstall.mk:61: pre_install] Error 2
make: *** [/tmp/SUSE15-64_K4.12.14_GCC7.3.1/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkroot.mk:77: install] Error 2
*Make Build Failed #8:
OS: FC30-64
Target: x86_64-native-linuxapp-clang
rte_io_set_bit(ECORE_ACCEPT_ANY_VLAN, rx_accept_flags;
^
LD axgbe_ethdev.o
CC zlib_pmd_ops.o
1 error generated.
make[6]: *** [/tmp/FC30-64_K4.20_Clang8.0.0/x86_64-native-linuxapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/mk/internal/rte.compile-pre.mk:116: bnx2x.o] Error 1
make[5]: *** [/tmp/FC30-64_K4.20_Clang8.0.0/x86_64-native-linuxapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.subdir.mk:37: bnx2x] Error 2
make[5]: *** Waiting for unfinished jobs....
CC axgbe_dev.o
CC scheduler_failover.o
CC axgbe_mdio.o
PMDINFO atl_ethdev.o.pmd.c
--
AR librte_pmd_axgbe.a
INSTALL-LIB librte_pmd_axgbe.a
CC caam_jr_hw.o
AR librte_pmd_atlantic.a
INSTALL-LIB librte_pmd_atlantic.a
make[4]: *** [/tmp/FC30-64_K4.20_Clang8.0.0/x86_64-native-linuxapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.subdir.mk:35: net] Error 2
make[4]: *** Waiting for unfinished jobs....
CC caam_jr_uio.o
AR librte_pmd_qat.a
CC nitrox_hal.o
INSTALL-LIB librte_pmd_qat.a
--
PMDINFO dpaa2_sec_dpseci.o.pmd.c
CC dpaa2_sec_dpseci.o.pmd.o
LD dpaa2_sec_dpseci.o
AR librte_pmd_dpaa2_sec.a
INSTALL-LIB librte_pmd_dpaa2_sec.a
make[3]: *** [/tmp/FC30-64_K4.20_Clang8.0.0/x86_64-native-linuxapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkbuild.mk:46: drivers] Error 2
make[2]: *** [/tmp/FC30-64_K4.20_Clang8.0.0/x86_64-native-linuxapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkroot.mk:99: all] Error 2
make[1]: *** [/tmp/FC30-64_K4.20_Clang8.0.0/x86_64-native-linuxapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkinstall.mk:61: pre_install] Error 2
make: *** [/tmp/FC30-64_K4.20_Clang8.0.0/x86_64-native-linuxapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkroot.mk:77: install] Error 2
*Make Build Failed #9:
OS: RHEL80-64
Target: x86_64-native-linuxapp-gcc
CC dpaa_ethdev.o
CC axgbe_ethdev.o.pmd.o
/tmp/RHEL80-64_K3.10.0_GCC8.2.1/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/drivers/net/bnx2x/bnx2x.c: At top level:
cc1: warning: unrecognized command line option ‘-Wno-address-of-packed-member’
CC cxgbe_ethdev.o
make[6]: *** [/tmp/RHEL80-64_K3.10.0_GCC8.2.1/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/internal/rte.compile-pre.mk:116: bnx2x.o] Error 1
make[5]: *** [/tmp/RHEL80-64_K3.10.0_GCC8.2.1/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.subdir.mk:37: bnx2x] Error 2
make[5]: *** Waiting for unfinished jobs....
LD axgbe_ethdev.o
SYMLINK-FILE include/rte_pmd_dpaa2.h
CC cxgbevf_ethdev.o
CC e1000_80003es2lan.o
--
PMDINFO igb_ethdev.o.pmd.c
CC igb_ethdev.o.pmd.o
LD igb_ethdev.o
AR librte_pmd_e1000.a
INSTALL-LIB librte_pmd_e1000.a
make[4]: *** [/tmp/RHEL80-64_K3.10.0_GCC8.2.1/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.subdir.mk:35: net] Error 2
make[3]: *** [/tmp/RHEL80-64_K3.10.0_GCC8.2.1/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkbuild.mk:46: drivers] Error 2
make[2]: *** [/tmp/RHEL80-64_K3.10.0_GCC8.2.1/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkroot.mk:99: all] Error 2
make[1]: *** [/tmp/RHEL80-64_K3.10.0_GCC8.2.1/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkinstall.mk:61: pre_install] Error 2
make: *** [/tmp/RHEL80-64_K3.10.0_GCC8.2.1/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkroot.mk:77: install] Error 2
*Make Build Failed #10:
OS: SUSE15-64
Target: x86_64-native-linuxapp-clang
^
PMDINFO avp_ethdev.o.pmd.c
CC avp_ethdev.o.pmd.o
1 error generated.
LD avp_ethdev.o
make[6]: *** [/tmp/SUSE15-64_K4.12.14_Clang5.0.1/x86_64-native-linuxapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/mk/internal/rte.compile-pre.mk:114: bnx2x.o] Error 1
make[5]: *** [/tmp/SUSE15-64_K4.12.14_Clang5.0.1/x86_64-native-linuxapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.subdir.mk:37: bnx2x] Error 2
make[5]: *** Waiting for unfinished jobs....
CC qat_sym_pmd.o
AR librte_pmd_avp.a
INSTALL-LIB librte_pmd_avp.a
AR librte_pmd_isal_comp.a
--
INSTALL-LIB librte_pmd_zlib.a
CC scheduler_pkt_size_distr.o
AR librte_pmd_ark.a
CC null_crypto_pmd.o
INSTALL-LIB librte_pmd_ark.a
make[4]: *** [/tmp/SUSE15-64_K4.12.14_Clang5.0.1/x86_64-native-linuxapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.subdir.mk:35: net] Error 2
make[4]: *** Waiting for unfinished jobs....
== Build drivers/crypto/dpaa_sec
CC dpaa2_sec_dpseci.o
CC scheduler_failover.o
CC scheduler_multicore.o
--
PMDINFO dpaa2_sec_dpseci.o.pmd.c
CC dpaa2_sec_dpseci.o.pmd.o
LD dpaa2_sec_dpseci.o
AR librte_pmd_dpaa2_sec.a
INSTALL-LIB librte_pmd_dpaa2_sec.a
make[3]: *** [/tmp/SUSE15-64_K4.12.14_Clang5.0.1/x86_64-native-linuxapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkbuild.mk:46: drivers] Error 2
make[2]: *** [/tmp/SUSE15-64_K4.12.14_Clang5.0.1/x86_64-native-linuxapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkroot.mk:99: all] Error 2
make[1]: *** [/tmp/SUSE15-64_K4.12.14_Clang5.0.1/x86_64-native-linuxapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkinstall.mk:61: pre_install] Error 2
make: *** [/tmp/SUSE15-64_K4.12.14_Clang5.0.1/x86_64-native-linuxapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkroot.mk:77: install] Error 2
*Make Build Failed #11:
OS: UB1604-64
Target: x86_64-native-linuxapp-gcc
CC bbdev_null.o.pmd.o
LD bbdev_null.o
/tmp/UB1604-64_K4.4.0_GCC5.4.0/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/drivers/net/bnx2x/bnx2x.c: At top level:
cc1: warning: unrecognized command line option ‘-Wno-address-of-packed-member’
PMDINFO axgbe_ethdev.o.pmd.c
/tmp/UB1604-64_K4.4.0_GCC5.4.0/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/internal/rte.compile-pre.mk:114: recipe for target 'bnx2x.o' failed
make[6]: *** [bnx2x.o] Error 1
CC axgbe_ethdev.o.pmd.o
/tmp/UB1604-64_K4.4.0_GCC5.4.0/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.subdir.mk:35: recipe for target 'bnx2x' failed
make[5]: *** [bnx2x] Error 2
make[5]: *** Waiting for unfinished jobs....
AR librte_pmd_bbdev_null.a
CC qat_sym_session.o
INSTALL-LIB librte_pmd_bbdev_null.a
== Build drivers/baseband/turbo_sw
--
make[6]: warning: Clock skew detected. Your build may be incomplete.
== Build drivers/crypto/dpaa_sec
AR librte_pmd_atlantic.a
INSTALL-LIB librte_pmd_atlantic.a
AR librte_pmd_qat.a
/tmp/UB1604-64_K4.4.0_GCC5.4.0/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.subdir.mk:35: recipe for target 'net' failed
make[4]: *** [net] Error 2
make[4]: *** Waiting for unfinished jobs....
INSTALL-LIB librte_pmd_qat.a
== Build drivers/crypto/caam_jr
AR librte_pmd_openssl.a
CC zlib_pmd_ops.o
--
LD dpaa2_sec_dpseci.o
AR librte_pmd_dpaa2_sec.a
INSTALL-LIB librte_pmd_dpaa2_sec.a
AR librte_pmd_octeontx_crypto.a
INSTALL-LIB librte_pmd_octeontx_crypto.a
/tmp/UB1604-64_K4.4.0_GCC5.4.0/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkbuild.mk:46: recipe for target 'drivers' failed
make[3]: *** [drivers] Error 2
/tmp/UB1604-64_K4.4.0_GCC5.4.0/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkroot.mk:98: recipe for target 'all' failed
make[2]: *** [all] Error 2
/tmp/UB1604-64_K4.4.0_GCC5.4.0/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkinstall.mk:60: recipe for target 'pre_install' failed
make[1]: *** [pre_install] Error 2
/tmp/UB1604-64_K4.4.0_GCC5.4.0/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkroot.mk:77: recipe for target 'install' failed
make: *** [install] Error 2
*Make Build Failed #12:
OS: UB1804-64
Target: x86_64-native-linuxapp-gcc
AR librte_pmd_atlantic.a
INSTALL-LIB librte_pmd_atlantic.a
== Build drivers/crypto/nitrox
/tmp/UB1804-64_K4.15.0_GCC7.3.0/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/drivers/net/bnx2x/bnx2x.c: At top level:
cc1: warning: unrecognized command line option ‘-Wno-address-of-packed-member’
/tmp/UB1804-64_K4.15.0_GCC7.3.0/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/internal/rte.compile-pre.mk:114: recipe for target 'bnx2x.o' failed
make[6]: *** [bnx2x.o] Error 1
/tmp/UB1804-64_K4.15.0_GCC7.3.0/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.subdir.mk:35: recipe for target 'bnx2x' failed
make[5]: *** [bnx2x] Error 2
make[5]: *** Waiting for unfinished jobs....
CC dpaa_sec.o
CC mc/dpseci.o
CC axgbe_i2c.o
CC caam_jr.o
--
AR librte_pmd_virtio_crypto.a
INSTALL-LIB librte_pmd_virtio_crypto.a
AR librte_pmd_axgbe.a
INSTALL-LIB librte_pmd_axgbe.a
make[6]: warning: Clock skew detected. Your build may be incomplete.
/tmp/UB1804-64_K4.15.0_GCC7.3.0/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.subdir.mk:35: recipe for target 'net' failed
make[4]: *** [net] Error 2
make[4]: *** Waiting for unfinished jobs....
AR librte_pmd_nitrox.a
INSTALL-LIB librte_pmd_nitrox.a
PMDINFO dpaa2_sec_dpseci.o.pmd.c
CC dpaa2_sec_dpseci.o.pmd.o
--
PMDINFO dpaa_sec.o.pmd.c
CC dpaa_sec.o.pmd.o
LD dpaa_sec.o
AR librte_pmd_dpaa_sec.a
INSTALL-LIB librte_pmd_dpaa_sec.a
/tmp/UB1804-64_K4.15.0_GCC7.3.0/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkbuild.mk:46: recipe for target 'drivers' failed
make[3]: *** [drivers] Error 2
/tmp/UB1804-64_K4.15.0_GCC7.3.0/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkroot.mk:98: recipe for target 'all' failed
make[2]: *** [all] Error 2
/tmp/UB1804-64_K4.15.0_GCC7.3.0/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkinstall.mk:60: recipe for target 'pre_install' failed
make[1]: *** [pre_install] Error 2
/tmp/UB1804-64_K4.15.0_GCC7.3.0/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkroot.mk:77: recipe for target 'install' failed
make: *** [install] Error 2
*Make Build Failed #13:
OS: CENTOS76-64
Target: x86_64-native-linuxapp-gcc+debug
LD axgbe_ethdev.o
CC dpaa_sec.o
CC rte_eth_bond_api.o
/tmp/CENTOS76-64_K3.10.0_GCC4.8.5/x86_64-native-linuxapp-gcc+debug/957b981f26114c1783c2b8b217533d45/dpdk/drivers/net/bnx2x/bnx2x.c: At top level:
cc1: warning: unrecognized command line option "-Wno-address-of-packed-member" [enabled by default]
make[6]: *** [bnx2x.o] Error 1
make[5]: *** [bnx2x] Error 2
make[5]: *** Waiting for unfinished jobs....
CC axgbe_dev.o
CC axgbe_mdio.o
CC dpaa2_sec_dpseci.o
CC caam_jr.o
--
INSTALL-LIB librte_pmd_dpaa2_sec.a
AR librte_pmd_cxgbe.a
INSTALL-LIB librte_pmd_cxgbe.a
AR librte_pmd_bond.a
INSTALL-LIB librte_pmd_bond.a
make[4]: *** [net] Error 2
make[3]: *** [drivers] Error 2
make[2]: *** [all] Error 2
make[1]: *** [pre_install] Error 2
make: *** [install] Error 2
*Make Build Failed #14:
OS: FreeBSD12-64
Target: x86_64-native-bsdapp-gcc+debug
CC ark_ethdev.o.pmd.o
/tmp/FreeBSD12-64_K19.02_GCC7.3.0/x86_64-native-bsdapp-gcc+debug/957b981f26114c1783c2b8b217533d45/dpdk/drivers/net/bnx2x/bnx2x.c: At top level:
CC qat_sym_session.o
cc1: warning: unrecognized command line option '-Wno-address-of-packed-member'
LD ark_ethdev.o
gmake[6]: *** [/tmp/FreeBSD12-64_K19.02_GCC7.3.0/x86_64-native-bsdapp-gcc+debug/957b981f26114c1783c2b8b217533d45/dpdk/mk/internal/rte.compile-pre.mk:116: bnx2x.o] Error 1
gmake[5]: *** [/tmp/FreeBSD12-64_K19.02_GCC7.3.0/x86_64-native-bsdapp-gcc+debug/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.subdir.mk:37: bnx2x] Error 2
gmake[5]: *** Waiting for unfinished jobs....
CC axgbe_dev.o
CC rte_eth_bond_pmd.o
PMDINFO cxgbe_ethdev.o.pmd.c
CC cxgbe_ethdev.o.pmd.o
--
CC zlib_pmd_ops.o
CC scheduler_pmd_ops.o
CC rte_cryptodev_scheduler.o
AR librte_pmd_cxgbe.a
INSTALL-LIB librte_pmd_cxgbe.a
gmake[4]: *** [/tmp/FreeBSD12-64_K19.02_GCC7.3.0/x86_64-native-bsdapp-gcc+debug/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.subdir.mk:35: net] Error 2
gmake[4]: *** Waiting for unfinished jobs....
CC scheduler_pkt_size_distr.o
CC scheduler_roundrobin.o
CC scheduler_failover.o
CC virtqueue.o
--
LD virtio_cryptodev.o
AR librte_pmd_virtio_crypto.a
INSTALL-LIB librte_pmd_virtio_crypto.a
AR librte_pmd_nitrox.a
INSTALL-LIB librte_pmd_nitrox.a
gmake[3]: *** [/tmp/FreeBSD12-64_K19.02_GCC7.3.0/x86_64-native-bsdapp-gcc+debug/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkbuild.mk:46: drivers] Error 2
gmake[2]: *** [/tmp/FreeBSD12-64_K19.02_GCC7.3.0/x86_64-native-bsdapp-gcc+debug/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkroot.mk:99: all] Error 2
gmake[1]: *** [/tmp/FreeBSD12-64_K19.02_GCC7.3.0/x86_64-native-bsdapp-gcc+debug/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkinstall.mk:61: pre_install] Error 2
gmake: *** [/tmp/FreeBSD12-64_K19.02_GCC7.3.0/x86_64-native-bsdapp-gcc+debug/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkroot.mk:77: install] Error 2
*Make Build Failed #15:
OS: FreeBSD12-64
Target: x86_64-native-bsdapp-clang
/tmp/FreeBSD12-64_K19.02_Clang6.0.1/x86_64-native-bsdapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/drivers/net/bnx2x/bnx2x.c:1491:17: note: to match this '('
rte_io_set_bit(ECORE_ACCEPT_ANY_VLAN, rx_accept_flags;
^
CC virtio_rxtx.o
1 error generated.
gmake[6]: *** [/tmp/FreeBSD12-64_K19.02_Clang6.0.1/x86_64-native-bsdapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/mk/internal/rte.compile-pre.mk:116: bnx2x.o] Error 1
gmake[5]: *** [/tmp/FreeBSD12-64_K19.02_Clang6.0.1/x86_64-native-bsdapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.subdir.mk:37: bnx2x] Error 2
gmake[5]: *** Waiting for unfinished jobs....
CC qat_logs.o
PMDINFO nitrox_device.o.pmd.c
CC nitrox_device.o.pmd.o
CC ark_rqp.o
--
AR librte_pmd_atlantic.a
INSTALL-LIB librte_pmd_atlantic.a
AR librte_pmd_axgbe.a
INSTALL-LIB librte_pmd_axgbe.a
AR librte_pmd_nitrox.a
gmake[4]: *** [/tmp/FreeBSD12-64_K19.02_Clang6.0.1/x86_64-native-bsdapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.subdir.mk:35: net] Error 2
gmake[4]: *** Waiting for unfinished jobs....
INSTALL-LIB librte_pmd_nitrox.a
AR librte_pmd_crypto_scheduler.a
INSTALL-LIB librte_pmd_crypto_scheduler.a
gmake[3]: *** [/tmp/FreeBSD12-64_K19.02_Clang6.0.1/x86_64-native-bsdapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkbuild.mk:46: drivers] Error 2
gmake[2]: *** [/tmp/FreeBSD12-64_K19.02_Clang6.0.1/x86_64-native-bsdapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkroot.mk:99: all] Error 2
gmake[1]: *** [/tmp/FreeBSD12-64_K19.02_Clang6.0.1/x86_64-native-bsdapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkinstall.mk:61: pre_install] Error 2
gmake: *** [/tmp/FreeBSD12-64_K19.02_Clang6.0.1/x86_64-native-bsdapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkroot.mk:77: install] Error 2
*Make Build Failed #16:
OS: CENTOS76-64
Target: x86_64-native-linuxapp-gcc
/tmp/CENTOS76-64_K3.10.0_GCC4.8.5/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/drivers/net/bnx2x/bnx2x.c:1493:2: error: expected ‘;’ before ‘}’ token
}
^
/tmp/CENTOS76-64_K3.10.0_GCC4.8.5/x86_64-native-linuxapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/drivers/net/bnx2x/bnx2x.c: At top level:
cc1: warning: unrecognized command line option "-Wno-address-of-packed-member" [enabled by default]
make[6]: *** [bnx2x.o] Error 1
make[5]: *** [bnx2x] Error 2
make[5]: *** Waiting for unfinished jobs....
CC otx_cryptodev_capabilities.o
CC axgbe_dev.o
CC otx_cryptodev_hw_access.o
SYMLINK-FILE include/rte_eth_bond.h
--
CC nitrox_device.o
AR librte_pmd_cxgbe.a
CC nitrox_hal.o
INSTALL-LIB librte_pmd_cxgbe.a
CC nitrox_logs.o
make[4]: *** [net] Error 2
make[4]: *** Waiting for unfinished jobs....
CC nitrox_sym.o
AR librte_pmd_virtio_crypto.a
INSTALL-LIB librte_pmd_virtio_crypto.a
CC nitrox_sym_capabilities.o
--
PMDINFO dpaa_sec.o.pmd.c
CC dpaa_sec.o.pmd.o
LD dpaa_sec.o
AR librte_pmd_dpaa_sec.a
INSTALL-LIB librte_pmd_dpaa_sec.a
make[3]: *** [drivers] Error 2
make[2]: *** [all] Error 2
make[1]: *** [pre_install] Error 2
make: *** [install] Error 2
*Make Build Failed #17:
OS: FreeBSD12-64
Target: x86_64-native-bsdapp-gcc+shared
CC virtio_cryptodev.o.pmd.o
LD virtio_cryptodev.o
CC rte_eth_bond_pmd.o
/tmp/FreeBSD12-64_K19.02_GCC7.3.0/x86_64-native-bsdapp-gcc+shared/957b981f26114c1783c2b8b217533d45/dpdk/drivers/net/bnx2x/bnx2x.c: At top level:
cc1: warning: unrecognized command line option '-Wno-address-of-packed-member'
gmake[6]: *** [/tmp/FreeBSD12-64_K19.02_GCC7.3.0/x86_64-native-bsdapp-gcc+shared/957b981f26114c1783c2b8b217533d45/dpdk/mk/internal/rte.compile-pre.mk:116: bnx2x.o] Error 1
gmake[5]: *** [/tmp/FreeBSD12-64_K19.02_GCC7.3.0/x86_64-native-bsdapp-gcc+shared/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.subdir.mk:37: bnx2x] Error 2
gmake[5]: *** Waiting for unfinished jobs....
CC cxgbevf_ethdev.o
CC hw_atl_b0.o
LD librte_pmd_octeontx_crypto.so.1.1
LD librte_pmd_virtio_crypto.so.1.1
--
PMDINFO igb_ethdev.o.pmd.c
CC igb_ethdev.o.pmd.o
LD igb_ethdev.o
LD librte_pmd_e1000.so.1.1
INSTALL-LIB librte_pmd_e1000.so.1.1
gmake[4]: *** [/tmp/FreeBSD12-64_K19.02_GCC7.3.0/x86_64-native-bsdapp-gcc+shared/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.subdir.mk:35: net] Error 2
gmake[3]: *** [/tmp/FreeBSD12-64_K19.02_GCC7.3.0/x86_64-native-bsdapp-gcc+shared/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkbuild.mk:46: drivers] Error 2
gmake[2]: *** [/tmp/FreeBSD12-64_K19.02_GCC7.3.0/x86_64-native-bsdapp-gcc+shared/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkroot.mk:99: all] Error 2
gmake[1]: *** [/tmp/FreeBSD12-64_K19.02_GCC7.3.0/x86_64-native-bsdapp-gcc+shared/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkinstall.mk:61: pre_install] Error 2
gmake: *** [/tmp/FreeBSD12-64_K19.02_GCC7.3.0/x86_64-native-bsdapp-gcc+shared/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkroot.mk:77: install] Error 2
*Make Build Failed #18:
OS: CENTOS76-64
Target: x86_64-native-linuxapp-clang
/tmp/CENTOS76-64_K3.10.0_Clang3.4.2/x86_64-native-linuxapp-clang/957b981f26114c1783c2b8b217533d45/dpdk/drivers/net/bnx2x/bnx2x.c:1491:17: note: to match this '('
rte_io_set_bit(ECORE_ACCEPT_ANY_VLAN, rx_accept_flags;
^
CC rte_pmd_atlantic.o
1 error generated.
make[6]: *** [bnx2x.o] Error 1
make[6]: *** Waiting for unfinished jobs....
== Build drivers/net/bonding
PMDINFO virtio_cryptodev.o.pmd.c
CC virtio_cryptodev.o.pmd.o
LD virtio_cryptodev.o
--
== Build drivers/net/cxgbe
SYMLINK-FILE include/rte_eth_bond_8023ad.h
CC rte_eth_bond_api.o
== Build drivers/net/dpaa
CC nitrox_sym_capabilities.o
make[5]: *** [bnx2x] Error 2
make[5]: *** Waiting for unfinished jobs....
CC nitrox_sym_reqmgr.o
CC rte_eth_bond_pmd.o
CC cxgbe_ethdev.o
AR librte_pmd_atlantic.a
--
LD dpaa2_sec_dpseci.o
AR librte_pmd_dpaa2_sec.a
INSTALL-LIB librte_pmd_dpaa2_sec.a
AR librte_pmd_cxgbe.a
INSTALL-LIB librte_pmd_cxgbe.a
make[4]: *** [net] Error 2
make[3]: *** [drivers] Error 2
make[2]: *** [all] Error 2
make[1]: *** [pre_install] Error 2
make: *** [install] Error 2
*Make Build Failed #19:
OS: CENTOS76-64
Target: x86_64-native-linuxapp-gcc+shared
== Build drivers/net/bonding
CC hw_atl_llh.o
== Build drivers/net/cxgbe
/tmp/CENTOS76-64_K3.10.0_GCC4.8.5/x86_64-native-linuxapp-gcc+shared/957b981f26114c1783c2b8b217533d45/dpdk/drivers/net/bnx2x/bnx2x.c: At top level:
cc1: warning: unrecognized command line option "-Wno-address-of-packed-member" [enabled by default]
make[6]: *** [bnx2x.o] Error 1
make[5]: *** [bnx2x] Error 2
make[5]: *** Waiting for unfinished jobs....
INSTALL-LIB librte_pmd_dpaa2_sec.so.2.1
CC hw_atl_utils_fw2x.o
CC axgbe_mdio.o
LD librte_pmd_octeontx_crypto.so.1.1
--
LD rte_eth_bond_pmd.o
LD librte_pmd_bond.so.2.1
INSTALL-LIB librte_pmd_bond.so.2.1
LD librte_pmd_cxgbe.so.1.1
INSTALL-LIB librte_pmd_cxgbe.so.1.1
make[4]: *** [net] Error 2
make[3]: *** [drivers] Error 2
make[2]: *** [all] Error 2
make[1]: *** [pre_install] Error 2
make: *** [install] Error 2
*Make Build Failed #20:
OS: FreeBSD12-64
Target: x86_64-native-bsdapp-gcc
| ^
| ;
1493 | }
| ~
CC otx_zip.o
gmake[6]: *** [/tmp/FreeBSD12-64_K19.02_GCC7.3.0/x86_64-native-bsdapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/internal/rte.compile-pre.mk:116: bnx2x.o] Error 1
gmake[5]: *** [/tmp/FreeBSD12-64_K19.02_GCC7.3.0/x86_64-native-bsdapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.subdir.mk:37: bnx2x] Error 2
gmake[5]: *** Waiting for unfinished jobs....
CC axgbe_rxtx_vec_sse.o
== Build drivers/crypto/virtio
CC qat_logs.o
CC hw_atl_b0.o
--
CC scheduler_pkt_size_distr.o
CC scheduler_failover.o
AR librte_pmd_atlantic.a
INSTALL-LIB librte_pmd_atlantic.a
CC scheduler_multicore.o
gmake[4]: *** [/tmp/FreeBSD12-64_K19.02_GCC7.3.0/x86_64-native-bsdapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.subdir.mk:35: net] Error 2
gmake[4]: *** Waiting for unfinished jobs....
CC virtqueue.o
CC virtio_pci.o
CC nitrox_device.o
PMDINFO null_crypto_pmd.o.pmd.c
--
INSTALL-LIB librte_pmd_virtio_crypto.a
AR librte_pmd_nitrox.a
INSTALL-LIB librte_pmd_nitrox.a
AR librte_pmd_octeontx_crypto.a
INSTALL-LIB librte_pmd_octeontx_crypto.a
gmake[3]: *** [/tmp/FreeBSD12-64_K19.02_GCC7.3.0/x86_64-native-bsdapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkbuild.mk:46: drivers] Error 2
gmake[2]: *** [/tmp/FreeBSD12-64_K19.02_GCC7.3.0/x86_64-native-bsdapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkroot.mk:99: all] Error 2
gmake[1]: *** [/tmp/FreeBSD12-64_K19.02_GCC7.3.0/x86_64-native-bsdapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkinstall.mk:61: pre_install] Error 2
gmake: *** [/tmp/FreeBSD12-64_K19.02_GCC7.3.0/x86_64-native-bsdapp-gcc/957b981f26114c1783c2b8b217533d45/dpdk/mk/rte.sdkroot.mk:77: install] Error 2
*Make Build Failed #21:
OS: CENTOS76-64
Target: x86_64-native-linuxapp-icc
/tmp/CENTOS76-64_K3.10.0_ICC19.0.0/x86_64-native-linuxapp-icc/957b981f26114c1783c2b8b217533d45/dpdk/drivers/net/bnx2x/bnx2x.c(1491): error: expected a ")"
rte_io_set_bit(ECORE_ACCEPT_ANY_VLAN, rx_accept_flags;
^
compilation aborted for /tmp/CENTOS76-64_K3.10.0_ICC19.0.0/x86_64-native-linuxapp-icc/957b981f26114c1783c2b8b217533d45/dpdk/drivers/net/bnx2x/bnx2x.c (code 2)
make[6]: *** [bnx2x.o] Error 2
make[5]: *** [bnx2x] Error 2
make[5]: *** Waiting for unfinished jobs....
CC hw_atl_llh.o
LD dpaa_sec.o
AR librte_pmd_dpaa_sec.a
INSTALL-LIB librte_pmd_dpaa_sec.a
--
CC nitrox_sym_reqmgr.o
PMDINFO virtio_cryptodev.o.pmd.c
CC virtio_cryptodev.o.pmd.o
AR librte_pmd_axgbe.a
INSTALL-LIB librte_pmd_axgbe.a
make[4]: *** [net] Error 2
make[4]: *** Waiting for unfinished jobs....
CC nitrox_qp.o
PMDINFO nitrox_device.o.pmd.c
CC nitrox_device.o.pmd.o
LD virtio_cryptodev.o
--
LD nitrox_device.o
AR librte_pmd_nitrox.a
INSTALL-LIB librte_pmd_nitrox.a
AR librte_pmd_octeontx_crypto.a
INSTALL-LIB librte_pmd_octeontx_crypto.a
make[3]: *** [drivers] Error 2
make[2]: *** [all] Error 2
make[1]: *** [pre_install] Error 2
make: *** [install] Error 2
*Meson Build Failed #1:
OS: UB1604-32
Target:build-gcc-static
FAILED: drivers/net/qede/base/f6110d5@@qede_base at sta/bcm_osal.c.o
gcc -Idrivers/net/qede/base/f6110d5@@qede_base at sta -Idrivers/net/qede/base -I../drivers/net/qede/base -Ilib/librte_net -I../lib/librte_net -I. -I../ -Iconfig -I../config -Ilib/librte_eal/common/include -I../lib/librte_eal/common/include -I../lib/librte_eal/linux/eal/include -Ilib/librte_eal/common -I../lib/librte_eal/common -Ilib/librte_eal/common/include/arch/x86 -I../lib/librte_eal/common/include/arch/x86 -Ilib/librte_eal -I../lib/librte_eal -Ilib/librte_kvargs -I../lib/librte_kvargs -Ilib/librte_mbuf -I../lib/librte_mbuf -Ilib/librte_mempool -I../lib/librte_mempool -Ilib/librte_ring -I../lib/librte_ring -fdiagnostics-color=always -pipe -D_FILE_OFFSET_BITS=64 -Wall -Winvalid-pch -Werror -O3 -include rte_config.h -Wunused-parameter -Wsign-compare -Wcast-qual -Wno-pointer-to-int-cast -D_GNU_SOURCE -fPIC -march=native -DALLOW_EXPERIMENTAL_API -Wno-unused-parameter -Wno-sign-compare -Wno-missing-prototypes -Wno-cast-qual -Wno-unused-function -Wno-unused-variable -Wno-strict-aliasing -Wno-missing-prototypes -Wno-unused-value -Wno-format-nonliteral -Wno-unused-but-set-variable -Wno-missing-declarations -Wno-maybe-uninitialized -Wno-strict-prototypes -Wno-format-extra-args -Wno-empty-body -MD -MQ 'drivers/net/qede/base/f6110d5@@qede_base at sta/bcm_osal.c.o' -MF 'drivers/net/qede/base/f6110d5@@qede_base at sta/bcm_osal.c.o.d' -o 'drivers/net/qede/base/f6110d5@@qede_base at sta/bcm_osal.c.o' -c ../drivers/net/qede/base/bcm_osal.c
In file included from ../drivers/net/qede/base/bcm_osal.c:10:0:
../drivers/net/qede/base/ecore_dev_api.h: In function ‘ecore_is_mf_ufp’:
../drivers/net/qede/base/ecore_dev_api.h:215:48: error: passing argument 2 of ‘rte_io_test_bit’ from incompatible pointer type [-Werror=incompatible-pointer-types]
return !!OSAL_TEST_BIT(ECORE_MF_UFP_SPECIFIC, &p_hwfn->p_dev->mf_bits);
^
../drivers/net/qede/base/bcm_osal.h:322:23: note: in definition of macro ‘OSAL_TEST_BIT’
rte_io_test_bit(bit, bitmap)
^
In file included from ../drivers/net/qede/base/bcm_osal.h:11:0,
from ../drivers/net/qede/base/bcm_osal.c:10:
../lib/librte_eal/common/include/rte_io_bitops.h:72:1: note: expected ‘uint64_t * {aka long long unsigned int *}’ but argument is of type ‘long unsigned int *’
rte_io_test_bit(int32_t nr, uint64_t *addr)
^
cc1: all warnings being treated as errors
[508/1715] Compiling C object 'drivers/net/qede/base/f6110d5@@qede_base at sta/ecore_hw.c.o'.
FAILED: drivers/net/qede/base/f6110d5@@qede_base at sta/ecore_hw.c.o
gcc -Idrivers/net/qede/base/f6110d5@@qede_base at sta -Idrivers/net/qede/base -I../drivers/net/qede/base -Ilib/librte_net -I../lib/librte_net -I. -I../ -Iconfig -I../config -Ilib/librte_eal/common/include -I../lib/librte_eal/common/include -I../lib/librte_eal/linux/eal/include -Ilib/librte_eal/common -I../lib/librte_eal/common -Ilib/librte_eal/common/include/arch/x86 -I../lib/librte_eal/common/include/arch/x86 -Ilib/librte_eal -I../lib/librte_eal -Ilib/librte_kvargs -I../lib/librte_kvargs -Ilib/librte_mbuf -I../lib/librte_mbuf -Ilib/librte_mempool -I../lib/librte_mempool -Ilib/librte_ring -I../lib/librte_ring -fdiagnostics-color=always -pipe -D_FILE_OFFSET_BITS=64 -Wall -Winvalid-pch -Werror -O3 -include rte_config.h -Wunused-parameter -Wsign-compare -Wcast-qual -Wno-pointer-to-int-cast -D_GNU_SOURCE -fPIC -march=native -DALLOW_EXPERIMENTAL_API -Wno-unused-parameter -Wno-sign-compare -Wno-missing-prototypes -Wno-cast-qual -Wno-unused-function -Wno-unused-variable -Wno-strict-aliasing -Wno-missing-prototypes -Wno-unused-value -Wno-format-nonliteral -Wno-unused-but-set-variable -Wno-missing-declarations -Wno-maybe-uninitialized -Wno-strict-prototypes -Wno-format-extra-args -Wno-empty-body -MD -MQ 'drivers/net/qede/base/f6110d5@@qede_base at sta/ecore_hw.c.o' -MF 'drivers/net/qede/base/f6110d5@@qede_base at sta/ecore_hw.c.o.d' -o 'drivers/net/qede/base/f6110d5@@qede_base at sta/ecore_hw.c.o' -c ../drivers/net/qede/base/ecore_hw.c
In file included from ../drivers/net/qede/base/ecore_hw.c:7:0:
../drivers/net/qede/base/ecore_dev_api.h: In function ‘ecore_is_mf_ufp’:
../drivers/net/qede/base/ecore_dev_api.h:215:48: error: passing argument 2 of ‘rte_io_test_bit’ from incompatible pointer type [-Werror=incompatible-pointer-types]
return !!OSAL_TEST_BIT(ECORE_MF_UFP_SPECIFIC, &p_hwfn->p_dev->mf_bits);
^
../drivers/net/qede/base/bcm_osal.h:322:23: note: in definition of macro ‘OSAL_TEST_BIT’
rte_io_test_bit(bit, bitmap)
^
In file included from ../drivers/net/qede/base/bcm_osal.h:11:0,
from ../drivers/net/qede/base/ecore_hw.c:7:
../lib/librte_eal/common/include/rte_io_bitops.h:72:1: note: expected ‘uint64_t * {aka long long unsigned int *}’ but argument is of type ‘long unsigned int *’
rte_io_test_bit(int32_t nr, uint64_t *addr)
^
cc1: all warnings being treated as errors
[509/1715] Compiling C object 'drivers/net/qede/base/f6110d5@@qede_base at sta/ecore_init_fw_funcs.c.o'.
[510/1715] Compiling C object 'drivers/net/qede/base/f6110d5@@qede_base at sta/ecore_cxt.c.o'.
FAILED: drivers/net/qede/base/f6110d5@@qede_base at sta/ecore_cxt.c.o
gcc -Idrivers/net/qede/base/f6110d5@@qede_base at sta -Idrivers/net/qede/base -I../drivers/net/qede/base -Ilib/librte_net -I../lib/librte_net -I. -I../ -Iconfig -I../config -Ilib/librte_eal/common/include -I../lib/librte_eal/common/include -I../lib/librte_eal/linux/eal/include -Ilib/librte_eal/common -I../lib/librte_eal/common -Ilib/librte_eal/common/include/arch/x86 -I../lib/librte_eal/common/include/arch/x86 -Ilib/librte_eal -I../lib/librte_eal -Ilib/librte_kvargs -I../lib/librte_kvargs -Ilib/librte_mbuf -I../lib/librte_mbuf -Ilib/librte_mempool -I../lib/librte_mempool -Ilib/librte_ring -I../lib/librte_ring -fdiagnostics-color=always -pipe -D_FILE_OFFSET_BITS=64 -Wall -Winvalid-pch -Werror -O3 -include rte_config.h -Wunused-parameter -Wsign-compare -Wcast-qual -Wno-pointer-to-int-cast -D_GNU_SOURCE -fPIC -march=native -DALLOW_EXPERIMENTAL_API -Wno-unused-parameter -Wno-sign-compare -Wno-missing-prototypes -Wno-cast-qual -Wno-unused-function -Wno-unused-variable -Wno-strict-aliasing -Wno-missing-prototypes -Wno-unused-value -Wno-format-nonliteral -Wno-unused-but-set-variable -Wno-missing-declarations -Wno-maybe-uninitialized -Wno-strict-prototypes -Wno-format-extra-args -Wno-empty-body -MD -MQ 'drivers/net/qede/base/f6110d5@@qede_base at sta/ecore_cxt.c.o' -MF 'drivers/net/qede/base/f6110d5@@qede_base at sta/ecore_cxt.c.o.d' -o 'drivers/net/qede/base/f6110d5@@qede_base at sta/ecore_cxt.c.o' -c ../drivers/net/qede/base/ecore_cxt.c
In file included from ../drivers/net/qede/base/ecore_cxt.c:7:0:
../drivers/net/qede/base/ecore_dev_api.h: In function ‘ecore_is_mf_ufp’:
../drivers/net/qede/base/ecore_dev_api.h:215:48: error: passing argument 2 of ‘rte_io_test_bit’ from incompatible pointer type [-Werror=incompatible-pointer-types]
return !!OSAL_TEST_BIT(ECORE_MF_UFP_SPECIFIC, &p_hwfn->p_dev->mf_bits);
^
../drivers/net/qede/base/bcm_osal.h:322:23: note: in definition of macro ‘OSAL_TEST_BIT’
rte_io_test_bit(bit, bitmap)
^
In file included from ../drivers/net/qede/base/bcm_osal.h:11:0,
from ../drivers/net/qede/base/ecore_cxt.c:7:
../lib/librte_eal/common/include/rte_io_bitops.h:72:1: note: expected ‘uint64_t * {aka long long unsigned int *}’ but argument is of type ‘long unsigned int *’
rte_io_test_bit(int32_t nr, uint64_t *addr)
^
In file included from ../drivers/net/qede/base/ecore_cxt.c:7:0:
../drivers/net/qede/base/ecore_cxt.c: In function ‘_ecore_cxt_acquire_cid’:
../drivers/net/qede/base/ecore_cxt.c:1948:24: error: passing argument 2 of ‘rte_io_set_bit’ from incompatible pointer type [-Werror=incompatible-pointer-types]
OSAL_SET_BIT(rel_cid, p_map->cid_map);
^
../drivers/net/qede/base/bcm_osal.h:316:22: note: in definition of macro ‘OSAL_SET_BIT’
rte_io_set_bit(bit, bitmap)
^
In file included from ../drivers/net/qede/base/bcm_osal.h:11:0,
from ../drivers/net/qede/base/ecore_cxt.c:7:
../lib/librte_eal/common/include/rte_io_bitops.h:42:1: note: expected ‘uint64_t * {aka long long unsigned int *}’ but argument is of type ‘long unsigned int *’
rte_io_set_bit(uint32_t nr, uint64_t *addr)
^
In file included from ../drivers/net/qede/base/ecore_cxt.c:7:0:
../drivers/net/qede/base/ecore_cxt.c: In function ‘ecore_cxt_test_cid_acquired’:
../drivers/net/qede/base/ecore_cxt.c:1994:30: error: passing argument 2 of ‘rte_io_test_bit’ from incompatible pointer type [-Werror=incompatible-pointer-types]
if (!OSAL_TEST_BIT(rel_cid, (*pp_map)->cid_map)) {
^
../drivers/net/qede/base/bcm_osal.h:322:23: note: in definition of macro ‘OSAL_TEST_BIT’
rte_io_test_bit(bit, bitmap)
^
In file included from ../drivers/net/qede/base/bcm_osal.h:11:0,
from ../drivers/net/qede/base/ecore_cxt.c:7:
../lib/librte_eal/common/include/rte_io_bitops.h:72:1: note: expected ‘uint64_t * {aka long long unsigned int *}’ but argument is of type ‘long unsigned int *’
rte_io_test_bit(int32_t nr, uint64_t *addr)
^
In file included from ../drivers/net/qede/base/ecore_cxt.c:7:0:
../drivers/net/qede/base/ecore_cxt.c: In function ‘_ecore_cxt_release_cid’:
../drivers/net/qede/base/ecore_cxt.c:2029:26: error: passing argument 2 of ‘rte_io_clear_bit’ from incompatible pointer type [-Werror=incompatible-pointer-types]
OSAL_CLEAR_BIT(rel_cid, p_map->cid_map);
^
../drivers/net/qede/base/bcm_osal.h:319:24: note: in definition of macro ‘OSAL_CLEAR_BIT’
rte_io_clear_bit(bit, bitmap)
^
In file included from ../drivers/net/qede/base/bcm_osal.h:11:0,
from ../drivers/net/qede/base/ecore_cxt.c:7:
../lib/librte_eal/common/include/rte_io_bitops.h:56:1: note: expected ‘uint64_t * {aka long long unsigned int *}’ but argument is of type ‘long unsigned int *’
rte_io_clear_bit(int32_t nr, uint64_t *addr)
^
In file included from ../drivers/net/qede/base/ecore_cxt.c:7:0:
../drivers/net/qede/base/ecore_cxt.c: In function ‘ecore_cxt_set_pf_params’:
../drivers/net/qede/base/ecore_cxt.c:2106:8: error: passing argument 2 of ‘rte_io_test_bit’ from incompatible pointer type [-Werror=incompatible-pointer-types]
&p_hwfn->p_dev->mf_bits))
^
../drivers/net/qede/base/bcm_osal.h:322:23: note: in definition of macro ‘OSAL_TEST_BIT’
rte_io_test_bit(bit, bitmap)
^
In file included from ../drivers/net/qede/base/bcm_osal.h:11:0,
from ../drivers/net/qede/base/ecore_cxt.c:7:
../lib/librte_eal/common/include/rte_io_bitops.h:72:1: note: expected ‘uint64_t * {aka long long unsigned int *}’ but argument is of type ‘long unsigned int *’
rte_io_test_bit(int32_t nr, uint64_t *addr)
^
cc1: all warnings being treated as errors
[511/1715] Compiling C object 'drivers/net/qede/base/f6110d5@@qede_base at sta/ecore_dev.c.o'.
FAILED: drivers/net/qede/base/f6110d5@@qede_base at sta/ecore_dev.c.o
gcc -Idrivers/net/qede/base/f6110d5@@qede_base at sta -Idrivers/net/qede/base -I../drivers/net/qede/base -Ilib/librte_net -I../lib/librte_net -I. -I../ -Iconfig -I../config -Ilib/librte_eal/common/include -I../lib/librte_eal/common/include -I../lib/librte_eal/linux/eal/include -Ilib/librte_eal/common -I../lib/librte_eal/common -Ilib/librte_eal/common/include/arch/x86 -I../lib/librte_eal/common/include/arch/x86 -Ilib/librte_eal -I../lib/librte_eal -Ilib/librte_kvargs -I../lib/librte_kvargs -Ilib/librte_mbuf -I../lib/librte_mbuf -Ilib/librte_mempool -I../lib/librte_mempool -Ilib/librte_ring -I../lib/librte_ring -fdiagnostics-color=always -pipe -D_FILE_OFFSET_BITS=64 -Wall -Winvalid-pch -Werror -O3 -include rte_config.h -Wunused-parameter -Wsign-compare -Wcast-qual -Wno-pointer-to-int-cast -D_GNU_SOURCE -fPIC -march=native -DALLOW_EXPERIMENTAL_API -Wno-unused-parameter -Wno-sign-compare -Wno-missing-prototypes -Wno-cast-qual -Wno-unused-function -Wno-unused-variable -Wno-strict-aliasing -Wno-missing-prototypes -Wno-unused-value -Wno-format-nonliteral -Wno-unused-but-set-variable -Wno-missing-declarations -Wno-maybe-uninitialized -Wno-strict-prototypes -Wno-format-extra-args -Wno-empty-body -MD -MQ 'drivers/net/qede/base/f6110d5@@qede_base at sta/ecore_dev.c.o' -MF 'drivers/net/qede/base/f6110d5@@qede_base at sta/ecore_dev.c.o.d' -o 'drivers/net/qede/base/f6110d5@@qede_base at sta/ecore_dev.c.o' -c ../drivers/net/qede/base/ecore_dev.c
In file included from ../drivers/net/qede/base/ecore_dev.c:7:0:
../drivers/net/qede/base/ecore_dev_api.h: In function ‘ecore_is_mf_ufp’:
../drivers/net/qede/base/ecore_dev_api.h:215:48: error: passing argument 2 of ‘rte_io_test_bit’ from incompatible pointer type [-Werror=incompatible-pointer-types]
return !!OSAL_TEST_BIT(ECORE_MF_UFP_SPECIFIC, &p_hwfn->p_dev->mf_bits);
^
../drivers/net/qede/base/bcm_osal.h:322:23: note: in definition of macro ‘OSAL_TEST_BIT’
rte_io_test_bit(bit, bitmap)
^
In file included from ../drivers/net/qede/base/bcm_osal.h:11:0,
from ../drivers/net/qede/base/ecore_dev.c:7:
../lib/librte_eal/common/include/rte_io_bitops.h:72:1: note: expected ‘uint64_t * {aka long long unsigned int *}’ but argument is of type ‘long unsigned int *’
rte_io_test_bit(int32_t nr, uint64_t *addr)
^
In file included from ../drivers/net/qede/base/ecore_dev.c:7:0:
../drivers/net/qede/base/ecore_dev.c: In function ‘ecore_llh_hw_init_pf’:
../drivers/net/qede/base/ecore_dev.c:808:43: error: passing argument 2 of ‘rte_io_test_bit’ from incompatible pointer type [-Werror=incompatible-pointer-types]
if (OSAL_TEST_BIT(ECORE_MF_LLH_MAC_CLSS, &p_dev->mf_bits) &&
^
../drivers/net/qede/base/bcm_osal.h:322:23: note: in definition of macro ‘OSAL_TEST_BIT’
rte_io_test_bit(bit, bitmap)
^
In file included from ../drivers/net/qede/base/bcm_osal.h:11:0,
from ../drivers/net/qede/base/ecore_dev.c:7:
../lib/librte_eal/common/include/rte_io_bitops.h:72:1: note: expected ‘uint64_t * {aka long long unsigned int *}’ but argument is of type ‘long unsigned int *’
rte_io_test_bit(int32_t nr, uint64_t *addr)
^
In file included from ../drivers/net/qede/base/ecore_dev.c:7:0:
../drivers/net/qede/base/ecore_dev.c: In function ‘ecore_llh_add_filter’:
../drivers/net/qede/base/ecore_dev.c:1047:38: error: passing argument 2 of ‘rte_io_test_bit’ from incompatible pointer type [-Werror=incompatible-pointer-types]
OSAL_TEST_BIT(ECORE_MF_OVLAN_CLSS, &p_hwfn->p_dev->mf_bits) ?
^
../drivers/net/qede/base/bcm_osal.h:322:23: note: in definition of macro ‘OSAL_TEST_BIT’
rte_io_test_bit(bit, bitmap)
^
In file included from ../drivers/net/qede/base/bcm_osal.h:11:0,
from ../drivers/net/qede/base/ecore_dev.c:7:
../lib/librte_eal/common/include/rte_io_bitops.h:72:1: note: expected ‘uint64_t * {aka long long unsigned int *}’ but argument is of type ‘long unsigned int *’
rte_io_test_bit(int32_t nr, uint64_t *addr)
^
In file included from ../drivers/net/qede/base/ecore_dev.c:7:0:
../drivers/net/qede/base/ecore_dev.c: In function ‘ecore_llh_add_mac_filter’:
../drivers/net/qede/base/ecore_dev.c:1086:44: error: passing argument 2 of ‘rte_io_test_bit’ from incompatible pointer type [-Werror=incompatible-pointer-types]
if (!OSAL_TEST_BIT(ECORE_MF_LLH_MAC_CLSS, &p_dev->mf_bits))
^
../drivers/net/qede/base/bcm_osal.h:322:23: note: in definition of macro ‘OSAL_TEST_BIT’
rte_io_test_bit(bit, bitmap)
^
In file included from ../drivers/net/qede/base/bcm_osal.h:11:0,
from ../drivers/net/qede/base/ecore_dev.c:7:
../lib/librte_eal/common/include/rte_io_bitops.h:72:1: note: expected ‘uint64_t * {aka long long unsigned int *}’ but argument is of type ‘long unsigned int *’
rte_io_test_bit(int32_t nr, uint64_t *addr)
^
In file included from ../drivers/net/qede/base/ecore_dev.c:7:0:
../drivers/net/qede/base/ecore_dev.c: In function ‘ecore_llh_add_protocol_filter’:
../drivers/net/qede/base/ecore_dev.c:1223:46: error: passing argument 2 of ‘rte_io_test_bit’ from incompatible pointer type [-Werror=incompatible-pointer-types]
if (!OSAL_TEST_BIT(ECORE_MF_LLH_PROTO_CLSS, &p_dev->mf_bits))
^
../drivers/net/qede/base/bcm_osal.h:322:23: note: in definition of macro ‘OSAL_TEST_BIT’
rte_io_test_bit(bit, bitmap)
^
In file included from ../drivers/net/qede/base/bcm_osal.h:11:0,
from ../drivers/net/qede/base/ecore_dev.c:7:
../lib/librte_eal/common/include/rte_io_bitops.h:72:1: note: expected ‘uint64_t * {aka long long unsigned int *}’ but argument is of type ‘long unsigned int *’
rte_io_test_bit(int32_t nr, uint64_t *addr)
^
In file included from ../drivers/net/qede/base/ecore_dev.c:7:0:
../drivers/net/qede/base/ecore_dev.c: In function ‘ecore_llh_remove_mac_filter’:
../drivers/net/qede/base/ecore_dev.c:1290:44: error: passing argument 2 of ‘rte_io_test_bit’ from incompatible pointer type [-Werror=incompatible-pointer-types]
if (!OSAL_TEST_BIT(ECORE_MF_LLH_MAC_CLSS, &p_dev->mf_bits))
^
../drivers/net/qede/base/bcm_osal.h:322:23: note: in definition of macro ‘OSAL_TEST_BIT’
rte_io_test_bit(bit, bitmap)
^
In file included from ../drivers/net/qede/base/bcm_osal.h:11:0,
from ../drivers/net/qede/base/ecore_dev.c:7:
../lib/librte_eal/common/include/rte_io_bitops.h:72:1: note: expected ‘uint64_t * {aka long long unsigned int *}’ but argument is of type ‘long unsigned int *’
rte_io_test_bit(int32_t nr, uint64_t *addr)
^
In file included from ../drivers/net/qede/base/ecore_dev.c:7:0:
../drivers/net/qede/base/ecore_dev.c: In function ‘ecore_llh_remove_protocol_filter’:
../drivers/net/qede/base/ecore_dev.c:1345:46: error: passing argument 2 of ‘rte_io_test_bit’ from incompatible pointer type [-Werror=incompatible-pointer-types]
if (!OSAL_TEST_BIT(ECORE_MF_LLH_PROTO_CLSS, &p_dev->mf_bits))
^
../drivers/net/qede/base/bcm_osal.h:322:23: note: in definition of macro ‘OSAL_TEST_BIT’
rte_io_test_bit(bit, bitmap)
^
In file included from ../drivers/net/qede/base/bcm_osal.h:11:0,
from ../drivers/net/qede/base/ecore_dev.c:7:
../lib/librte_eal/common/include/rte_io_bitops.h:72:1: note: expected ‘uint64_t * {aka long long unsigned int *}’ but argument is of type ‘long unsigned int *’
rte_io_test_bit(int32_t nr, uint64_t *addr)
^
In file included from ../drivers/net/qede/base/ecore_dev.c:7:0:
../drivers/net/qede/base/ecore_dev.c: In function ‘ecore_llh_clear_ppfid_filters’:
../drivers/net/qede/base/ecore_dev.c:1399:46: error: passing argument 2 of ‘rte_io_test_bit’ from incompatible pointer type [-Werror=incompatible-pointer-types]
if (!OSAL_TEST_BIT(ECORE_MF_LLH_PROTO_CLSS, &p_dev->mf_bits) &&
^
../drivers/net/qede/base/bcm_osal.h:322:23: note: in definition of macro ‘OSAL_TEST_BIT’
rte_io_test_bit(bit, bitmap)
^
In file included from ../drivers/net/qede/base/bcm_osal.h:11:0,
from ../drivers/net/qede/base/ecore_dev.c:7:
../lib/librte_eal/common/include/rte_io_bitops.h:72:1: note: expected ‘uint64_t * {aka long long unsigned int *}’ but argument is of type ‘long unsigned int *’
rte_io_test_bit(int32_t nr, uint64_t *addr)
^
In file included from ../drivers/net/qede/base/ecore_dev.c:7:0:
../drivers/net/qede/base/ecore_dev.c:1400:44: error: passing argument 2 of ‘rte_io_test_bit’ from incompatible pointer type [-Werror=incompatible-pointer-types]
!OSAL_TEST_BIT(ECORE_MF_LLH_MAC_CLSS, &p_dev->mf_bits))
^
../drivers/net/qede/base/bcm_osal.h:322:23: note: in definition of macro ‘OSAL_TEST_BIT’
rte_io_test_bit(bit, bitmap)
^
In file included from ../drivers/net/qede/base/bcm_osal.h:11:0,
from ../drivers/net/qede/base/ecore_dev.c:7:
../lib/librte_eal/common/include/rte_io_bitops.h:72:1: note: expected ‘uint64_t * {aka long long unsigned int *}’ but argument is of type ‘long unsigned int *’
rte_io_test_bit(int32_t nr, uint64_t *addr)
^
In file included from ../drivers/net/qede/base/ecore_dev.c:7:0:
../drivers/net/qede/base/ecore_dev.c: In function ‘ecore_llh_clear_all_filters’:
../drivers/net/qede/base/ecore_dev.c:1426:46: error: passing argument 2 of ‘rte_io_test_bit’ from incompatible pointer type [-Werror=incompatible-pointer-types]
if (!OSAL_TEST_BIT(ECORE_MF_LLH_PROTO_CLSS, &p_dev->mf_bits) &&
^
../drivers/net/qede/base/bcm_osal.h:322:23: note: in definition of macro ‘OSAL_TEST_BIT’
rte_io_test_bit(bit, bitmap)
^
In file included from ../drivers/net/qede/base/bcm_osal.h:11:0,
from ../drivers/net/qede/base/ecore_dev.c:7:
../lib/librte_eal/common/include/rte_io_bitops.h:72:1: note: expected ‘uint64_t * {aka long long unsigned int *}’ but argument is of type ‘long unsigned int *’
rte_io_test_bit(int32_t nr, uint64_t *addr)
^
In file included from ../drivers/net/qede/base/ecore_dev.c:7:0:
../drivers/net/qede/base/ecore_dev.c:1427:44: error: passing argument 2 of ‘rte_io_test_bit’ from incompatible pointer type [-Werror=incompatible-pointer-types]
!OSAL_TEST_BIT(ECORE_MF_LLH_MAC_CLSS, &p_dev->mf_bits))
^
../drivers/net/qede/base/bcm_osal.h:322:23: note: in definition of macro ‘OSAL_TEST_BIT’
rte_io_test_bit(bit, bitmap)
^
In file included from ../drivers/net/qede/base/bcm_osal.h:11:0,
from ../drivers/net/qede/base/ecore_dev.c:7:
../lib/librte_eal/common/include/rte_io_bitops.h:72:1: note: expected ‘uint64_t * {aka long long unsigned int *}’ but argument is of type ‘long unsigned int *’
rte_io_test_bit(int32_t nr, uint64_t *addr)
^
In file included from ../drivers/net/qede/base/ecore_dev.c:7:0:
../drivers/net/qede/base/ecore_dev.c: In function ‘ecore_calc_hw_mode’:
../drivers/net/qede/base/ecore_dev.c:2676:41: error: passing argument 2 of ‘rte_io_test_bit’ from incompatible pointer type [-Werror=incompatible-pointer-types]
if (OSAL_TEST_BIT(ECORE_MF_OVLAN_CLSS, &p_hwfn->p_dev->mf_bits))
^
../drivers/net/qede/base/bcm_osal.h:322:23: note: in definition of macro ‘OSAL_TEST_BIT’
rte_io_test_bit(bit, bitmap)
^
In file included from ../drivers/net/qede/base/bcm_osal.h:11:0,
from ../drivers/net/qede/base/ecore_dev.c:7:
../lib/librte_eal/common/include/rte_io_bitops.h:72:1: note: expected ‘uint64_t * {aka long long unsigned int *}’ but argument is of type ‘long unsigned int *’
rte_io_test_bit(int32_t nr, uint64_t *addr)
^
In file included from ../drivers/net/qede/base/ecore_dev.c:7:0:
../drivers/net/qede/base/ecore_dev.c: In function ‘ecore_hw_init_port’:
../drivers/net/qede/base/ecore_dev.c:3384:43: error: passing argument 2 of ‘rte_io_test_bit’ from incompatible pointer type [-Werror=incompatible-pointer-types]
if (OSAL_TEST_BIT(ECORE_MF_NEED_DEF_PF, &p_dev->mf_bits)) {
^
../drivers/net/qede/base/bcm_osal.h:322:23: note: in definition of macro ‘OSAL_TEST_BIT’
rte_io_test_bit(bit, bitmap)
^
In file included from ../drivers/net/qede/base/bcm_osal.h:11:0,
from ../drivers/net/qede/base/ecore_dev.c:7:
../lib/librte_eal/common/include/rte_io_bitops.h:72:1: note: expected ‘uint64_t * {aka long long unsigned int *}’ but argument is of type ‘long unsigned int *’
rte_io_test_bit(int32_t nr, uint64_t *addr)
^
In file included from ../drivers/net/qede/base/ecore_dev.c:7:0:
../drivers/net/qede/base/ecore_dev.c: In function ‘ecore_hw_init’:
../drivers/net/qede/base/ecore_dev.c:3715:10: error: passing argument 2 of ‘rte_io_test_bit’ from incompatible pointer type [-Werror=incompatible-pointer-types]
&p_dev->mf_bits) ||
^
../drivers/net/qede/base/bcm_osal.h:322:23: note: in definition of macro ‘OSAL_TEST_BIT’
rte_io_test_bit(bit, bitmap)
^
In file included from ../drivers/net/qede/base/bcm_osal.h:11:0,
from ../drivers/net/qede/base/ecore_dev.c:7:
../lib/librte_eal/common/include/rte_io_bitops.h:72:1: note: expected ‘uint64_t * {aka long long unsigned int *}’ but argument is of type ‘long unsigned int *’
rte_io_test_bit(int32_t nr, uint64_t *addr)
^
In file included from ../drivers/net/qede/base/ecore_dev.c:7:0:
../drivers/net/qede/base/ecore_dev.c:3717:10: error: passing argument 2 of ‘rte_io_test_bit’ from incompatible pointer type [-Werror=incompatible-pointer-types]
&p_dev->mf_bits))) {
^
../drivers/net/qede/base/bcm_osal.h:322:23: note: in definition of macro ‘OSAL_TEST_BIT’
rte_io_test_bit(bit, bitmap)
^
In file included from ../drivers/net/qede/base/bcm_osal.h:11:0,
from ../drivers/net/qede/base/ecore_dev.c:7:
../lib/librte_eal/common/include/rte_io_bitops.h:72:1: note: expected ‘uint64_t * {aka long long unsigned int *}’ but argument is of type ‘long unsigned int *’
rte_io_test_bit(int32_t nr, uint64_t *addr)
^
In file included from ../drivers/net/qede/base/ecore_dev.c:7:0:
../drivers/net/qede/base/ecore_dev.c:3719:8: error: passing argument 2 of ‘rte_io_test_bit’ from incompatible pointer type [-Werror=incompatible-pointer-types]
&p_dev->mf_bits))
^
../drivers/net/qede/base/bcm_osal.h:322:23: note: in definition of macro ‘OSAL_TEST_BIT’
rte_io_test_bit(bit, bitmap)
^
In file included from ../drivers/net/qede/base/bcm_osal.h:11:0,
from ../drivers/net/qede/base/ecore_dev.c:7:
../lib/librte_eal/common/include/rte_io_bitops.h:72:1: note: expected ‘uint64_t * {aka long long unsigned int *}’ but argument is of type ‘long unsigned int *’
rte_io_test_bit(int32_t nr, uint64_t *addr)
^
In file included from ../drivers/net/qede/base/ecore_dev.c:7:0:
../drivers/net/qede/base/ecore_dev.c: In function ‘ecore_hw_stop’:
../drivers/net/qede/base/ecore_dev.c:4107:44: error: passing argument 2 of ‘rte_io_test_bit’ from incompatible pointer type [-Werror=incompatible-pointer-types]
OSAL_TEST_BIT(ECORE_MF_LLH_MAC_CLSS, &p_dev->mf_bits) &&
^
../drivers/net/qede/base/bcm_osal.h:322:23: note: in definition of macro ‘OSAL_TEST_BIT’
rte_io_test_bit(bit, bitmap)
^
In file included from ../drivers/net/qede/base/bcm_osal.h:11:0,
from ../drivers/net/qede/base/ecore_dev.c:7:
../lib/librte_eal/common/include/rte_io_bitops.h:72:1: note: expected ‘uint64_t * {aka long long unsigned int *}’ but argument is of type ‘long unsigned int *’
rte_io_test_bit(int32_t nr, uint64_t *addr)
^
In file included from ../drivers/net/qede/base/ecore_dev.c:7:0:
../drivers/net/qede/base/ecore_dev.c: In function ‘ecore_hw_get_nvm_info’:
../drivers/net/qede/base/ecore_dev.c:5136:5: error: passing argument 2 of ‘rte_io_set_bit’ from incompatible pointer type [-Werror=incompatible-pointer-types]
&p_hwfn->hw_info.device_capabilities);
^
../drivers/net/qede/base/bcm_osal.h:316:22: note: in definition of macro ‘OSAL_SET_BIT’
rte_io_set_bit(bit, bitmap)
^
In file included from ../drivers/net/qede/base/bcm_osal.h:11:0,
from ../drivers/net/qede/base/ecore_dev.c:7:
../lib/librte_eal/common/include/rte_io_bitops.h:42:1: note: expected ‘uint64_t * {aka long long unsigned int *}’ but argument is of type ‘long unsigned int *’
rte_io_set_bit(uint32_t nr, uint64_t *addr)
^
In file included from ../drivers/net/qede/base/ecore_dev.c:7:0:
../drivers/net/qede/base/ecore_dev.c:5139:5: error: passing argument 2 of ‘rte_io_set_bit’ from incompatible pointer type [-Werror=incompatible-pointer-types]
&p_hwfn->hw_info.device_capabilities);
^
../drivers/net/qede/base/bcm_osal.h:316:22: note: in definition of macro ‘OSAL_SET_BIT’
rte_io_set_bit(bit, bitmap)
^
In file included from ../drivers/net/qede/base/bcm_osal.h:11:0,
from ../drivers/net/qede/base/ecore_dev.c:7:
../lib/librte_eal/common/include/rte_io_bitops.h:42:1: note: expected ‘uint64_t * {aka long long unsigned int *}’ but argument is of type ‘long unsigned int *’
rte_io_set_bit(uint32_t nr, uint64_t *addr)
^
In file included from ../drivers/net/qede/base/ecore_dev.c:7:0:
../drivers/net/qede/base/ecore_dev.c:5142:5: error: passing argument 2 of ‘rte_io_set_bit’ from incompatible pointer type [-Werror=incompatible-pointer-types]
&p_hwfn->hw_info.device_capabilities);
^
../drivers/net/qede/base/bcm_osal.h:316:22: note: in definition of macro ‘OSAL_SET_BIT’
rte_io_set_bit(bit, bitmap)
^
In file included from ../drivers/net/qede/base/bcm_osal.h:11:0,
from ../drivers/net/qede/base/ecore_dev.c:7:
../lib/librte_eal/common/include/rte_io_bitops.h:42:1: note: expected ‘uint64_t * {aka long long unsigned int *}’ but argument is of type ‘long unsigned int *’
rte_io_set_bit(uint32_t nr, uint64_t *addr)
^
In file included from ../drivers/net/qede/base/ecore_dev.c:7:0:
../drivers/net/qede/base/ecore_dev.c:5145:5: error: passing argument 2 of ‘rte_io_set_bit’ from incompatible pointer type [-Werror=incompatible-pointer-types]
&p_hwfn->hw_info.device_capabilities);
^
../drivers/net/qede/base/bcm_osal.h:316:22: note: in definition of macro ‘OSAL_SET_BIT’
rte_io_set_bit(bit, bitmap)
^
In file included from ../drivers/net/qede/base/bcm_osal.h:11:0,
from ../drivers/net/qede/base/ecore_dev.c:7:
../lib/librte_eal/common/include/rte_io_bitops.h:42:1: note: expected ‘uint64_t * {aka long long unsigned int *}’ but argument is of type ‘long unsigned int *’
rte_io_set_bit(uint32_t nr, uint64_t *addr)
^
In file included from ../drivers/net/qede/base/ecore_dev.c:7:0:
../drivers/net/qede/base/ecore_dev.c:5148:5: error: passing argument 2 of ‘rte_io_set_bit’ from incompatible pointer type [-Werror=incompatible-pointer-types]
&p_hwfn->hw_info.device_capabilities);
^
../drivers/net/qede/base/bcm_osal.h:316:22: note: in definition of macro ‘OSAL_SET_BIT’
rte_io_set_bit(bit, bitmap)
^
In file included from ../drivers/net/qede/base/bcm_osal.h:11:0,
from ../drivers/net/qede/base/ecore_dev.c:7:
../lib/librte_eal/common/include/rte_io_bitops.h:42:1: note: expected ‘uint64_t * {aka long long unsigned int *}’ but argument is of type ‘long unsigned int *’
rte_io_set_bit(uint32_t nr, uint64_t *addr)
^
In file included from ../drivers/net/qede/base/ecore_dev.c:7:0:
../drivers/net/qede/base/ecore_dev.c: In function ‘ecore_llh_set_function_as_default’:
../drivers/net/qede/base/ecore_dev.c:6190:42: error: passing argument 2 of ‘rte_io_test_bit’ from incompatible pointer type [-Werror=incompatible-pointer-types]
if (OSAL_TEST_BIT(ECORE_MF_NEED_DEF_PF, &p_hwfn->p_dev->mf_bits)) {
^
../drivers/net/qede/base/bcm_osal.h:322:23: note: in definition of macro ‘OSAL_TEST_BIT’
rte_io_test_bit(bit, bitmap)
^
In file included from ../drivers/net/qede/base/bcm_osal.h:11:0,
from ../drivers/net/qede/base/ecore_dev.c:7:
../lib/librte_eal/common/include/rte_io_bitops.h:72:1: note: expected ‘uint64_t * {aka long long unsigned int *}’ but argument is of type ‘long unsigned int *’
rte_io_test_bit(int32_t nr, uint64_t *addr)
^
In file included from ../drivers/net/qede/base/ecore_dev.c:7:0:
../drivers/net/qede/base/ecore_dev.c: In function ‘ecore_is_mf_fip_special’:
../drivers/net/qede/base/ecore_dev.c:6767:47: error: passing argument 2 of ‘rte_io_test_bit’ from incompatible pointer type [-Werror=incompatible-pointer-types]
return !!OSAL_TEST_BIT(ECORE_MF_FIP_SPECIAL, &p_dev->mf_bits);
^
../drivers/net/qede/base/bcm_osal.h:322:23: note: in definition of macro ‘OSAL_TEST_BIT’
rte_io_test_bit(bit, bitmap)
^
In file included from ../drivers/net/qede/base/bcm_osal.h:11:0,
from ../drivers/net/qede/base/ecore_dev.c:7:
../lib/librte_eal/common/include/rte_io_bitops.h:72:1: note: expected ‘uint64_t * {aka long long unsigned int *}’ but argument is of type ‘long unsigned int *’
rte_io_test_bit(int32_t nr, uint64_t *addr)
^
cc1: all warnings being treated as errors
[512/1715] Compiling C object 'lib/76b5a35@@rte_pipeline at sta/librte_pipeline_rte_table_action.c.o'.
ninja: build stopped: subcommand failed
*Meson Build Failed #2:
OS: SUSE15-64
Target:build-gcc-static
FAILED: drivers/a715181@@tmp_rte_pmd_bnx2x at sta/net_bnx2x_bnx2x.c.o
gcc -Idrivers/a715181@@tmp_rte_pmd_bnx2x at sta -Idrivers -I../drivers -Idrivers/net/bnx2x -I../drivers/net/bnx2x -Ilib/librte_ethdev -I../lib/librte_ethdev -I. -I../ -Iconfig -I../config -Ilib/librte_eal/common/include -I../lib/librte_eal/common/include -I../lib/librte_eal/linux/eal/include -Ilib/librte_eal/common -I../lib/librte_eal/common -Ilib/librte_eal/common/include/arch/x86 -I../lib/librte_eal/common/include/arch/x86 -Ilib/librte_eal -I../lib/librte_eal -Ilib/librte_kvargs -I../lib/librte_kvargs -Ilib/librte_net -I../lib/librte_net -Ilib/librte_mbuf -I../lib/librte_mbuf -Ilib/librte_mempool -I../lib/librte_mempool -Ilib/librte_ring -I../lib/librte_ring -Ilib/librte_meter -I../lib/librte_meter -Idrivers/bus/pci -I../drivers/bus/pci -I../drivers/bus/pci/linux -Ilib/librte_pci -I../lib/librte_pci -Idrivers/bus/vdev -I../drivers/bus/vdev -fdiagnostics-color=always -pipe -D_FILE_OFFSET_BITS=64 -Wall -Winvalid-pch -Werror -O3 -include rte_config.h -Wunused-parameter -Wsign-compare -Wcast-qual -D_GNU_SOURCE -fPIC -march=native -Wno-format-truncation -DZLIB_CONST -DALLOW_EXPERIMENTAL_API -MD -MQ 'drivers/a715181@@tmp_rte_pmd_bnx2x at sta/net_bnx2x_bnx2x.c.o' -MF 'drivers/a715181@@tmp_rte_pmd_bnx2x at sta/net_bnx2x_bnx2x.c.o.d' -o 'drivers/a715181@@tmp_rte_pmd_bnx2x at sta/net_bnx2x_bnx2x.c.o' -c ../drivers/net/bnx2x/bnx2x.c
../drivers/net/bnx2x/bnx2x.c: In function ‘bnx2x_fill_accept_flags’:
../drivers/net/bnx2x/bnx2x.c:1491:56: error: expected ‘)’ before ‘;’ token
rte_io_set_bit(ECORE_ACCEPT_ANY_VLAN, rx_accept_flags;
^
../drivers/net/bnx2x/bnx2x.c:1493:2: error: expected ‘;’ before ‘}’ token
}
^
[607/1909] Compiling C object 'drivers/a715181@@tmp_rte_pmd_bnx2x at sta/net_bnx2x_bnx2x_rxtx.c.o'.
[608/1909] Compiling C object 'drivers/a715181@@tmp_rte_pmd_bond at sta/net_bonding_rte_eth_bond_pmd.c.o'.
[609/1909] Compiling C object 'drivers/a715181@@tmp_rte_pmd_bond at sta/net_bonding_rte_eth_bond_8023ad.c.o'.
[610/1909] Compiling C object 'drivers/a715181@@tmp_rte_pmd_bnx2x at sta/net_bnx2x_bnx2x_stats.c.o'.
[611/1909] Compiling C object 'drivers/a715181@@tmp_rte_pmd_bnx2x at sta/net_bnx2x_ecore_sp.c.o'.
[612/1909] Compiling C object 'lib/76b5a35@@rte_pipeline at sta/librte_pipeline_rte_table_action.c.o'.
[613/1909] Compiling C object 'drivers/a715181@@tmp_rte_pmd_bnx2x at sta/net_bnx2x_elink.c.o'.
ninja: build stopped: subcommand failed
*Meson Build Failed #3:
OS: UB1804-64
Target:build-gcc-static
FAILED: drivers/a715181@@tmp_rte_pmd_bnx2x at sta/net_bnx2x_bnx2x.c.o
gcc -Idrivers/a715181@@tmp_rte_pmd_bnx2x at sta -Idrivers -I../drivers -Idrivers/net/bnx2x -I../drivers/net/bnx2x -Ilib/librte_ethdev -I../lib/librte_ethdev -I. -I../ -Iconfig -I../config -Ilib/librte_eal/common/include -I../lib/librte_eal/common/include -I../lib/librte_eal/linux/eal/include -Ilib/librte_eal/common -I../lib/librte_eal/common -Ilib/librte_eal/common/include/arch/x86 -I../lib/librte_eal/common/include/arch/x86 -Ilib/librte_eal -I../lib/librte_eal -Ilib/librte_kvargs -I../lib/librte_kvargs -Ilib/librte_net -I../lib/librte_net -Ilib/librte_mbuf -I../lib/librte_mbuf -Ilib/librte_mempool -I../lib/librte_mempool -Ilib/librte_ring -I../lib/librte_ring -Ilib/librte_meter -I../lib/librte_meter -Idrivers/bus/pci -I../drivers/bus/pci -I../drivers/bus/pci/linux -Ilib/librte_pci -I../lib/librte_pci -Idrivers/bus/vdev -I../drivers/bus/vdev -fdiagnostics-color=always -pipe -D_FILE_OFFSET_BITS=64 -Wall -Winvalid-pch -Werror -O3 -include rte_config.h -Wunused-parameter -Wsign-compare -Wcast-qual -D_GNU_SOURCE -fPIC -march=native -mno-avx512f -Wno-format-truncation -DZLIB_CONST -DALLOW_EXPERIMENTAL_API -MD -MQ 'drivers/a715181@@tmp_rte_pmd_bnx2x at sta/net_bnx2x_bnx2x.c.o' -MF 'drivers/a715181@@tmp_rte_pmd_bnx2x at sta/net_bnx2x_bnx2x.c.o.d' -o 'drivers/a715181@@tmp_rte_pmd_bnx2x at sta/net_bnx2x_bnx2x.c.o' -c ../drivers/net/bnx2x/bnx2x.c
../drivers/net/bnx2x/bnx2x.c: In function ‘bnx2x_fill_accept_flags’:
../drivers/net/bnx2x/bnx2x.c:1491:56: error: expected ‘)’ before ‘;’ token
rte_io_set_bit(ECORE_ACCEPT_ANY_VLAN, rx_accept_flags;
^
../drivers/net/bnx2x/bnx2x.c:1493:2: error: expected ‘;’ before ‘}’ token
}
^
[611/1869] Compiling C object 'drivers/a715181@@tmp_rte_pmd_bnx2x at sta/net_bnx2x_bnx2x_ethdev.c.o'.
[612/1869] Compiling C object 'drivers/a715181@@tmp_rte_pmd_bnx2x at sta/net_bnx2x_bnx2x_vfpf.c.o'.
[613/1869] Compiling C object 'drivers/a715181@@tmp_rte_pmd_bond at sta/net_bonding_rte_eth_bond_pmd.c.o'.
[614/1869] Compiling C object 'drivers/a715181@@tmp_rte_pmd_bond at sta/net_bonding_rte_eth_bond_8023ad.c.o'.
[615/1869] Compiling C object 'drivers/a715181@@tmp_rte_pmd_bnx2x at sta/net_bnx2x_bnx2x_rxtx.c.o'.
ninja: build stopped: subcommand failed
*Meson Build Failed #4:
OS: FreeBSD12-64
Target:build-gcc-static
FAILED: drivers/a715181@@tmp_rte_pmd_bnx2x at sta/net_bnx2x_bnx2x.c.o
ccache gcc -Idrivers/a715181@@tmp_rte_pmd_bnx2x at sta -Idrivers -I../drivers -Idrivers/net/bnx2x -I../drivers/net/bnx2x -Ilib/librte_ethdev -I../lib/librte_ethdev -I. -I../ -Iconfig -I../config -Ilib/librte_eal/common/include -I../lib/librte_eal/common/include -I../lib/librte_eal/freebsd/eal/include -Ilib/librte_eal/common -I../lib/librte_eal/common -Ilib/librte_eal/common/include/arch/x86 -I../lib/librte_eal/common/include/arch/x86 -Ilib/librte_eal -I../lib/librte_eal -Ilib/librte_kvargs -I../lib/librte_kvargs -Ilib/librte_net -I../lib/librte_net -Ilib/librte_mbuf -I../lib/librte_mbuf -Ilib/librte_mempool -I../lib/librte_mempool -Ilib/librte_ring -I../lib/librte_ring -Ilib/librte_meter -I../lib/librte_meter -Idrivers/bus/pci -I../drivers/bus/pci -I../drivers/bus/pci/bsd -Ilib/librte_pci -I../lib/librte_pci -Idrivers/bus/vdev -I../drivers/bus/vdev -fdiagnostics-color=always -pipe -D_FILE_OFFSET_BITS=64 -Wall -Winvalid-pch -Werror -O3 -include rte_config.h -Wunused-parameter -Wsign-compare -Wcast-qual -D_GNU_SOURCE -D__BSD_VISIBLE -fPIC -march=native -Wno-format-truncation -DZLIB_CONST -DALLOW_EXPERIMENTAL_API -MD -MQ 'drivers/a715181@@tmp_rte_pmd_bnx2x at sta/net_bnx2x_bnx2x.c.o' -MF 'drivers/a715181@@tmp_rte_pmd_bnx2x at sta/net_bnx2x_bnx2x.c.o.d' -o 'drivers/a715181@@tmp_rte_pmd_bnx2x at sta/net_bnx2x_bnx2x.c.o' -c ../drivers/net/bnx2x/bnx2x.c
../drivers/net/bnx2x/bnx2x.c: In function 'bnx2x_fill_accept_flags':
../drivers/net/bnx2x/bnx2x.c:1491:56: error: expected ')' before ';' token
rte_io_set_bit(ECORE_ACCEPT_ANY_VLAN, rx_accept_flags;
^
../drivers/net/bnx2x/bnx2x.c:1493:2: error: expected ';' before '}' token
}
^
[149/1446] Linking target lib/librte_meter.so.3.1.
[150/1446] Compiling C object 'drivers/a715181@@tmp_rte_pmd_bnx2x at sta/net_bnx2x_bnx2x_vfpf.c.o'.
[151/1446] Generating symbol file 'lib/76b5a35@@rte_ring at sha/librte_ring.so.2.1.symbols'.
[152/1446] Compiling C object 'drivers/a715181@@tmp_rte_pmd_bnx2x at sta/net_bnx2x_bnx2x_rxtx.c.o'.
[153/1446] Compiling C object 'drivers/a715181@@tmp_rte_pmd_bnx2x at sta/net_bnx2x_bnx2x_stats.c.o'.
ninja: build stopped: subcommand failed
DPDK STV team
More information about the test-report
mailing list