[dpdk-test-report] |FAILURE| pw66019doc: fix naming of Mellanox devices

sys_stv at intel.com sys_stv at intel.com
Wed Feb 26 19:48:30 CET 2020


Test-Label: Intel-compilation
Test-Status: FAILURE
http://dpdk.org/patch/66019

_apply issues_

Submitter: Thomas Monjalon <thomas at monjalon.net>
Date: 2020-02-24 19:52:14
Reply_mail: 20200224195214.3560827-1-thomas at monjalon.net
DPDK git baseline:
	Repo:dpdk-next-net, CommitID: d7142fbae16f185e11bfa44be061399afc40a1be
	Repo:dpdk, CommitID: d7142fbae16f185e11bfa44be061399afc40a1be

*Repo: dpdk-next-net
# Compile vdpa-oriented Mellanox ConnectX-6 & Bluefield (MLX5) PMD
#
CONFIG_RTE_LIBRTE_MLX5_VDPA_PMD=n


error: patch failed: config/common_base:361
error: config/common_base: patch does not apply
Checking patch drivers/net/mlx5/mlx5.c...
error: while searching for:
 *   key is specified in devargs
 * - if DevX is enabled the inline mode is queried from the
--
 * - otherwise L2 mode (18 bytes) is assumed for ConnectX-4/4LX
 *   and none (0 bytes) for other NICs
 *
 * @param spawn

error: patch failed: drivers/net/mlx5/mlx5.c:1724
error: drivers/net/mlx5/mlx5.c: patch does not apply
Checking patch drivers/net/mlx5/mlx5_rxtx.c...
error: while searching for:

/*
--
 * This mode is supported by ConnectX-4LX only and imposes
 * offload limitations, not supported:
 *   - ACL/Flows (metadata are becoming meaningless)
 *   - WQE Inline headers

error: patch failed: drivers/net/mlx5/mlx5_rxtx.c:5213
error: drivers/net/mlx5/mlx5_rxtx.c: patch does not apply
Checking patch drivers/net/mlx5/mlx5_txq.c...
error: while searching for:
	 * If there is requested minimal amount of data to inline
	 * we MUST enable inlining. This is a case for ConnectX-4
--
	 * and ConnectX-4LX which requires L2-L4 inlined to
	 * support E-Switch Flows.
	 */
	if (inlen_mode) {

error: patch failed: drivers/net/mlx5/mlx5_txq.c:983
error: drivers/net/mlx5/mlx5_txq.c: patch does not apply
*Repo: dpdk
# Compile vdpa-oriented Mellanox ConnectX-6 & Bluefield (MLX5) PMD
#
CONFIG_RTE_LIBRTE_MLX5_VDPA_PMD=n


error: patch failed: config/common_base:361
error: config/common_base: patch does not apply
Checking patch drivers/net/mlx5/mlx5.c...
error: while searching for:
 *   key is specified in devargs
 * - if DevX is enabled the inline mode is queried from the
--
 * - otherwise L2 mode (18 bytes) is assumed for ConnectX-4/4LX
 *   and none (0 bytes) for other NICs
 *
 * @param spawn

error: patch failed: drivers/net/mlx5/mlx5.c:1724
error: drivers/net/mlx5/mlx5.c: patch does not apply
Checking patch drivers/net/mlx5/mlx5_rxtx.c...
error: while searching for:

/*
--
 * This mode is supported by ConnectX-4LX only and imposes
 * offload limitations, not supported:
 *   - ACL/Flows (metadata are becoming meaningless)
 *   - WQE Inline headers

error: patch failed: drivers/net/mlx5/mlx5_rxtx.c:5213
error: drivers/net/mlx5/mlx5_rxtx.c: patch does not apply
Checking patch drivers/net/mlx5/mlx5_txq.c...
error: while searching for:
	 * If there is requested minimal amount of data to inline
	 * we MUST enable inlining. This is a case for ConnectX-4
--
	 * and ConnectX-4LX which requires L2-L4 inlined to
	 * support E-Switch Flows.
	 */
	if (inlen_mode) {

error: patch failed: drivers/net/mlx5/mlx5_txq.c:983
error: drivers/net/mlx5/mlx5_txq.c: patch does not apply

DPDK STV team


More information about the test-report mailing list