[dpdk-test-report]|SUCCESS | dpdk-next-net|55cc366fb1| Intel-Testing
sys_stv at intel.com
sys_stv at intel.com
Tue Jan 17 17:16:24 CET 2023
Test-Label: intel-Testing
Test-Status: SUCCESS
_Testing PASS
DPDK git repo: dpdk-next-net
commit 55cc366fb18afa7dda6f6e513ab311e30f8b7248
Author: Rongwei Liu <rongweil at nvidia.com>
Date: Mon Nov 14 13:59:46 2022 +0200
ethdev: add special flags when creating async transfer table
In case flow rules match only one kind of traffic in a flow table,
then optimization can be done via allocation of this table.
Such optimization is possible only if the application gives a hint
about its usage of the table during initial configuration.
The transfer domain rules may process traffic from wire or vport,
which may correspond to two kinds of underlayer resources.
That's why the first two hints introduced in this patch are about
wire and vport traffic specialization.
Wire means traffic arrives from the uplink port while vport means
traffic initiated from VF/SF.
There are two possible approaches for providing the hints.
Using IPv4 as an example:
1. Use pattern item in both template table and flow rules.
pattern_template: pattern ANY_VPORT / eth / ipv4 is 1.1.1.1 / end
async flow create: pattern ANY_VPORT / eth / ipv4 is 1.1.1.2 / end
"ANY_VPORT" needs to be present in each flow rule even if it's
just a hint. No value to match because matching is already done by
IPv4 item.
2. Add special flags into table_attr.
template_table 0 create table_id 0 group 1 transfer vport_orig
Approach 1 needs to specify the pattern in each flow rule which wastes
memory and is not user friendly.
This patch takes the 2nd approach and introduces one new member
"specialize" into rte_flow_table_attr to indicate possible flow table
optimization.
By default, there is no hint, so the behavior of the transfer domain
doesn't change.
There is no guarantee that the hint will be used by the PMD.
Signed-off-by: Rongwei Liu <rongweil at nvidia.com>
Acked-by: Ori Kam <orika at nvidia.com>
Testing Summary : 18 Case Done, 18 Successful, 0 Failures
Testbed #1: 9 Case Done, 9 Successful, 0 Failures
* Test result details:
+-------------+---------------------------+-------+
| suite | case | status|
+-------------+---------------------------+-------+
| asan_smoke | test_rxtx_with_ASan_enable| passed|
| pf_smoke | test_pf_jumbo_frames | passed|
| pf_smoke | test_pf_rss | passed|
| pf_smoke | test_pf_tx_rx_queue | passed|
| vf_smoke | test_vf_jumbo_frames | passed|
| vf_smoke | test_vf_rss | passed|
| vf_smoke | test_vf_tx_rx_queue | passed|
| virtio_smoke| test_virtio_loopback | passed|
| virtio_smoke| test_virtio_pvp | passed|
+-------------+---------------------------+-------+
* Environment:
OS : Ubuntu 20.04.5 LTS
Kernel : 5.8.0-63-generic
GCC : 9.4.0-1ubuntu1~20.04.1
NIC : Ethernet Controller E810-C for SFP
Target : x86_64-native-linuxapp-gcc
Testbed #2: 9 Case Done, 9 Successful, 0 Failures
* Test result details:
+-------------+---------------------------+-------+
| suite | case | status|
+-------------+---------------------------+-------+
| asan_smoke | test_rxtx_with_ASan_enable| passed|
| pf_smoke | test_pf_jumbo_frames | passed|
| pf_smoke | test_pf_rss | passed|
| pf_smoke | test_pf_tx_rx_queue | passed|
| vf_smoke | test_vf_rss | passed|
| vf_smoke | test_vf_tx_rx_queue | passed|
| vf_smoke | test_vf_jumbo_frames | n/a |
| virtio_smoke| test_virtio_loopback | passed|
| virtio_smoke| test_virtio_pvp | passed|
+-------------+---------------------------+-------+
* Environment:
OS : Ubuntu 20.04.5 LTS
Kernel : 5.13.0-30-generic
GCC : 9.4.0-1ubuntu1~20.04.1
NIC : Ethernet Controller XL710 for 40GbE QSFP+
Target : x86_64-native-linuxapp-gcc
TestPlan:
pf_smoke: http://git.dpdk.org/tools/dts/tree/test_plans/pf_smoke_test_plan.rst
vf_smoke: http://git.dpdk.org/tools/dts/tree/test_plans/vf_smoke_test_plan.rst
asan_smoke: http://git.dpdk.org/tools/dts/tree/test_plans/asan_smoke_test_plan.rst
TestSuite:
pf_smoke: http://git.dpdk.org/tools/dts/tree/tests/TestSuite_pf_smoke.py
vf_smoke: http://git.dpdk.org/tools/dts/tree/tests/TestSuite_vf_smoke.py
virtio_smoke: http://git.dpdk.org/tools/dts/tree/tests/TestSuite_virtio_smoke.py
asan_smoke: http://git.dpdk.org/tools/dts/tree/tests/TestSuite_asan_smoke.py
DPDK STV team
More information about the test-report
mailing list