|FAILURE| pw139725 [RFC] eal: make lcore_init aware of cgroup

qemudev at loongson.cn qemudev at loongson.cn
Mon Apr 29 21:31:57 CEST 2024


Test-Label: loongarch-unit-testing
Test-Status: FAILURE
http://dpdk.org/patch/139725

_Unit Testing FAIL_

Submitter: Stephen Hemminger <stephen at networkplumber.org>
Date: Mon, 29 Apr 2024 12:52:25 -0700
DPDK git baseline: Repo:dpdk
  Branch: main
  CommitID: 7e06c0de1952d3109a5b0c4779d7e7d8059c9d78

139725 --> testing fail

Test environment and result as below:

+---------------------+----------------+
|     Environment     | dpdk_unit_test |
+---------------------+----------------+
| Loongnix-Server 8.3 | FAIL           |
+---------------------+----------------+

Loongnix-Server 8.3
    Kernel: 4.19.190+
    Compiler: gcc 8.3


Test result details:
  1/112 DPDK:fast-tests / acl_autotest                            OK              3.28s
  2/112 DPDK:fast-tests / argparse_autotest                       OK              0.52s
  3/112 DPDK:fast-tests / atomic_autotest                         OK              8.83s
  4/112 DPDK:fast-tests / bitcount_autotest                       OK              0.32s
  5/112 DPDK:fast-tests / bitmap_autotest                         OK              0.57s
  6/112 DPDK:fast-tests / bitops_autotest                         OK              0.52s
  7/112 DPDK:fast-tests / bitratestats_autotest                   OK              0.57s
  8/112 DPDK:fast-tests / bpf_autotest                            OK              0.57s
  9/112 DPDK:fast-tests / bpf_convert_autotest                    OK              0.57s
 10/112 DPDK:fast-tests / byteorder_autotest                      OK              0.57s
 11/112 DPDK:fast-tests / cksum_autotest                          OK              0.57s
 12/112 DPDK:fast-tests / cmdline_autotest                        OK              0.57s
 13/112 DPDK:fast-tests / common_autotest                         OK              1.37s
 14/112 DPDK:fast-tests / compressdev_autotest                    SKIP            0.07s   exit status 77
 15/112 DPDK:fast-tests / cpuflags_autotest                       OK              0.47s
 16/112 DPDK:fast-tests / crc_autotest                            OK              0.47s
 17/112 DPDK:fast-tests / user_delay_us                           OK              0.47s
 18/112 DPDK:fast-tests / debug_autotest                          OK             14.36s
 19/112 DPDK:fast-tests / devargs_autotest                        OK              0.42s
 20/112 DPDK:fast-tests / dispatcher_autotest                     OK              2.52s
 21/112 DPDK:fast-tests / distributor_autotest                    OK              1.27s
 22/112 DPDK:fast-tests / eal_flags_c_opt_autotest                FAIL            0.57s   exit status 255
 23/112 DPDK:fast-tests / eal_flags_main_opt_autotest             FAIL            0.27s   exit status 255
 24/112 DPDK:fast-tests / eal_flags_n_opt_autotest                OK              0.27s
 25/112 DPDK:fast-tests / eal_flags_hpet_autotest                 OK              0.17s
 26/112 DPDK:fast-tests / eal_flags_no_huge_autotest              OK              0.32s
 27/112 DPDK:fast-tests / eal_flags_a_opt_autotest                OK              0.42s
 28/112 DPDK:fast-tests / eal_flags_b_opt_autotest                OK              0.32s
 29/112 DPDK:fast-tests / eal_flags_vdev_opt_autotest             OK              0.27s
 30/112 DPDK:fast-tests / eal_flags_r_opt_autotest                OK              0.27s
 31/112 DPDK:fast-tests / eal_flags_mem_autotest                  OK              0.72s
 32/112 DPDK:fast-tests / eal_flags_file_prefix_autotest          OK             22.36s
 33/112 DPDK:fast-tests / eal_flags_misc_autotest                 OK              1.07s
 34/112 DPDK:fast-tests / eal_fs_autotest                         OK              0.47s
 35/112 DPDK:fast-tests / errno_autotest                          OK              0.47s
 36/112 DPDK:fast-tests / ethdev_link_status                      OK              0.47s
 37/112 DPDK:fast-tests / event_eth_tx_adapter_autotest           OK              1.72s
 38/112 DPDK:fast-tests / event_ring_autotest                     OK              0.47s
 39/112 DPDK:fast-tests / eventdev_common_autotest                OK              0.47s
 40/112 DPDK:fast-tests / eventdev_selftest_sw                    OK              7.43s
 41/112 DPDK:fast-tests / fbarray_autotest                        OK              0.47s
 42/112 DPDK:fast-tests / fib_autotest                            OK              1.17s
 43/112 DPDK:fast-tests / fib6_autotest                           OK              1.17s
 44/112 DPDK:fast-tests / func_reentrancy_autotest                OK              2.33s
 45/112 DPDK:fast-tests / graph_autotest                          OK              0.62s
 46/112 DPDK:fast-tests / node_list_dump                          OK              0.47s
 47/112 DPDK:fast-tests / hash_autotest                           OK              1.42s
 48/112 DPDK:fast-tests / hash_readwrite_func_autotest            OK              6.48s
 49/112 DPDK:fast-tests / interrupt_autotest                      OK              1.77s
 50/112 DPDK:fast-tests / ipfrag_autotest                         OK              0.12s
 51/112 DPDK:fast-tests / ipsec_autotest                          SKIP            0.47s   exit status 77
 52/112 DPDK:fast-tests / kvargs_autotest                         OK              0.47s
 53/112 DPDK:fast-tests / latencystats_autotest                   OK              0.47s
 54/112 DPDK:fast-tests / lcores_autotest                         OK              5.28s
 55/112 DPDK:fast-tests / logs_autotest                           OK              0.47s
 56/112 DPDK:fast-tests / lpm_autotest                            OK              2.43s
 57/112 DPDK:fast-tests / lpm6_autotest                           OK              5.64s
 58/112 DPDK:fast-tests / malloc_autotest                         OK             59.75s
 59/112 DPDK:fast-tests / mbuf_autotest                           OK              5.42s
 60/112 DPDK:fast-tests / mcslock_autotest                        OK              4.17s
 61/112 DPDK:fast-tests / member_autotest                         OK              1.72s
 62/112 DPDK:fast-tests / memcpy_autotest                         OK              7.08s
 63/112 DPDK:fast-tests / memory_autotest                         OK              0.12s
 64/112 DPDK:fast-tests / mempool_autotest                        OK              0.47s
 65/112 DPDK:fast-tests / memzone_autotest                        OK              0.17s
 66/112 DPDK:fast-tests / meter_autotest                          OK              0.47s
 67/112 DPDK:fast-tests / metrics_autotest                        OK              0.47s
 68/112 DPDK:fast-tests / multiprocess_autotest                   OK              0.27s
 69/112 DPDK:fast-tests / net_ether_autotest                      OK              1.12s
 70/112 DPDK:fast-tests / pcapng_autotest                         OK              6.83s
 71/112 DPDK:fast-tests / pdcp_autotest                           SKIP            0.12s   exit status 77
 72/112 DPDK:fast-tests / pdump_autotest                          OK              0.57s
 73/112 DPDK:fast-tests / per_lcore_autotest                      OK              0.57s
 74/112 DPDK:fast-tests / pflock_autotest                         OK              1.27s
 75/112 DPDK:fast-tests / pie_autotest                            OK              0.47s
 76/112 DPDK:fast-tests / ring_pmd_autotest                       OK              0.47s
 77/112 DPDK:fast-tests / power_autotest                          OK              0.47s
 78/112 DPDK:fast-tests / power_cpufreq_autotest                  SKIP            0.12s   exit status 77
 79/112 DPDK:fast-tests / power_intel_uncore_autotest             SKIP            0.47s   exit status 77
 80/112 DPDK:fast-tests / power_kvm_vm_autotest                   SKIP            0.12s   exit status 77
 81/112 DPDK:fast-tests / prefetch_autotest                       OK              0.47s
 82/112 DPDK:fast-tests / rawdev_autotest                         OK              0.47s
 83/112 DPDK:fast-tests / rcu_qsbr_autotest                       OK              0.97s
 84/112 DPDK:fast-tests / reorder_autotest                        OK              0.52s
 85/112 DPDK:fast-tests / rib_autotest                            OK              9.14s
 86/112 DPDK:fast-tests / rib6_autotest                           OK              9.14s
 87/112 DPDK:fast-tests / ring_autotest                           OK              0.47s
 88/112 DPDK:fast-tests / rwlock_test1_autotest                   OK              1.22s
 89/112 DPDK:fast-tests / rwlock_rda_autotest                     OK              5.48s
 90/112 DPDK:fast-tests / rwlock_rds_wrm_autotest                 OK              5.48s
 91/112 DPDK:fast-tests / rwlock_rde_wro_autotest                 OK              5.48s
 92/112 DPDK:fast-tests / sched_autotest                          OK              0.47s
 93/112 DPDK:fast-tests / security_autotest                       OK              0.12s
 94/112 DPDK:fast-tests / seqlock_autotest                        OK              2.47s
 95/112 DPDK:fast-tests / service_autotest                        OK              3.17s
 96/112 DPDK:fast-tests / spinlock_autotest                       OK              0.52s
 97/112 DPDK:fast-tests / stack_autotest                          OK              0.87s
 98/112 DPDK:fast-tests / stack_lf_autotest                       SKIP            0.07s   exit status 77
 99/112 DPDK:fast-tests / string_autotest                         OK              0.47s
100/112 DPDK:fast-tests / table_autotest                          OK              7.69s
101/112 DPDK:fast-tests / tailq_autotest                          OK              0.47s
102/112 DPDK:fast-tests / telemetry_data_autotest                 OK              0.47s
103/112 DPDK:fast-tests / telemetry_json_autotest                 OK              0.47s
104/112 DPDK:fast-tests / thash_autotest                          OK              0.47s
105/112 DPDK:fast-tests / threads_autotest                        OK              0.67s
106/112 DPDK:fast-tests / ticketlock_autotest                     OK              0.62s
107/112 DPDK:fast-tests / timer_autotest                          OK              4.03s
108/112 DPDK:fast-tests / trace_autotest                          OK              0.67s
109/112 DPDK:fast-tests / trace_autotest_with_traces              OK              0.47s
110/112 DPDK:fast-tests / vdev_autotest                           OK              0.47s
111/112 DPDK:fast-tests / version_autotest                        OK              0.47s
112/112 DPDK:fast-tests / telemetry_all                           OK              1.37s


Ok:                 103
Expected Fail:      0
Fail:               2
Unexpected Pass:    0
Skipped:            7
Timeout:            0



Test logs for failed test cases:
================================================================================
DPDK:fast-tests / eal_flags_c_opt_autotest: FAIL
================================================================================
-------------------------------------stdout-------------------------------------
RTE>>eal_flags_c_opt_autotest
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '-c' 

Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 64
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<level> Set global log level
  --log-level=<type-match>:<level>
                      Set specific log level
  --log-level=help    Show log types and levels
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink[=existing|always|never]
                      When to unlink files in hugetlbfs
                      ('existing' by default, no value means 'always')
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL Linux options:
  --socket-mem        Memory to allocate on sockets (comma separated values)
  --socket-limit      Limit memory allocation on sockets (comma separated values)
  --huge-dir          Directory where hugetlbfs is mounted
  --file-prefix       Prefix for hugepage filenames
  --create-uio-dev    Create /dev/uioX (usually done by hotplug)
  --vfio-intr         Interrupt mode for VFIO (legacy|msi|msix)
  --vfio-vf-token     VF token (UUID) shared between SR-IOV PF and VFs
  --legacy-mem        Legacy memory mode (no dynamic allocation, contiguous segments)
  --single-file-segments Put all hugepage memory in single files
  --match-allocations Free hugepages exactly as allocated
  --huge-worker-stack[=size]
                      Allocate worker thread stacks from hugepage memory.
                      Size is in units of kbytes and defaults to system
                      thread stack size if not specified.

Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '-c' 'error' 

Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 64
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<level> Set global log level
  --log-level=<type-match>:<level>
                      Set specific log level
  --log-level=help    Show log types and levels
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink[=existing|always|never]
                      When to unlink files in hugetlbfs
                      ('existing' by default, no value means 'always')
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL Linux options:
  --socket-mem        Memory to allocate on sockets (comma separated values)
  --socket-limit      Limit memory allocation on sockets (comma separated values)
  --huge-dir          Directory where hugetlbfs is mounted
  --file-prefix       Prefix for hugepage filenames
  --create-uio-dev    Create /dev/uioX (usually done by hotplug)
  --vfio-intr         Interrupt mode for VFIO (legacy|msi|msix)
  --vfio-vf-token     VF token (UUID) shared between SR-IOV PF and VFs
  --legacy-mem        Legacy memory mode (no dynamic allocation, contiguous segments)
  --single-file-segments Put all hugepage memory in single files
  --match-allocations Free hugepages exactly as allocated
  --huge-worker-stack[=size]
                      Allocate worker thread stacks from hugepage memory.
                      Size is in units of kbytes and defaults to system
                      thread stack size if not specified.

Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '-c' '1' 
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '-l' 

Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 64
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<level> Set global log level
  --log-level=<type-match>:<level>
                      Set specific log level
  --log-level=help    Show log types and levels
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink[=existing|always|never]
                      When to unlink files in hugetlbfs
                      ('existing' by default, no value means 'always')
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL Linux options:
  --socket-mem        Memory to allocate on sockets (comma separated values)
  --socket-limit      Limit memory allocation on sockets (comma separated values)
  --huge-dir          Directory where hugetlbfs is mounted
  --file-prefix       Prefix for hugepage filenames
  --create-uio-dev    Create /dev/uioX (usually done by hotplug)
  --vfio-intr         Interrupt mode for VFIO (legacy|msi|msix)
  --vfio-vf-token     VF token (UUID) shared between SR-IOV PF and VFs
  --legacy-mem        Legacy memory mode (no dynamic allocation, contiguous segments)
  --single-file-segments Put all hugepage memory in single files
  --match-allocations Free hugepages exactly as allocated
  --huge-worker-stack[=size]
                      Allocate worker thread stacks from hugepage memory.
                      Size is in units of kbytes and defaults to system
                      thread stack size if not specified.

Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '-l' ' ' 

Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 64
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<level> Set global log level
  --log-level=<type-match>:<level>
                      Set specific log level
  --log-level=help    Show log types and levels
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink[=existing|always|never]
                      When to unlink files in hugetlbfs
                      ('existing' by default, no value means 'always')
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL Linux options:
  --socket-mem        Memory to allocate on sockets (comma separated values)
  --socket-limit      Limit memory allocation on sockets (comma separated values)
  --huge-dir          Directory where hugetlbfs is mounted
  --file-prefix       Prefix for hugepage filenames
  --create-uio-dev    Create /dev/uioX (usually done by hotplug)
  --vfio-intr         Interrupt mode for VFIO (legacy|msi|msix)
  --vfio-vf-token     VF token (UUID) shared between SR-IOV PF and VFs
  --legacy-mem        Legacy memory mode (no dynamic allocation, contiguous segments)
  --single-file-segments Put all hugepage memory in single files
  --match-allocations Free hugepages exactly as allocated
  --huge-worker-stack[=size]
                      Allocate worker thread stacks from hugepage memory.
                      Size is in units of kbytes and defaults to system
                      thread stack size if not specified.

Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '-l' 'error' 

Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 64
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<level> Set global log level
  --log-level=<type-match>:<level>
                      Set specific log level
  --log-level=help    Show log types and levels
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink[=existing|always|never]
                      When to unlink files in hugetlbfs
                      ('existing' by default, no value means 'always')
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL Linux options:
  --socket-mem        Memory to allocate on sockets (comma separated values)
  --socket-limit      Limit memory allocation on sockets (comma separated values)
  --huge-dir          Directory where hugetlbfs is mounted
  --file-prefix       Prefix for hugepage filenames
  --create-uio-dev    Create /dev/uioX (usually done by hotplug)
  --vfio-intr         Interrupt mode for VFIO (legacy|msi|msix)
  --vfio-vf-token     VF token (UUID) shared between SR-IOV PF and VFs
  --legacy-mem        Legacy memory mode (no dynamic allocation, contiguous segments)
  --single-file-segments Put all hugepage memory in single files
  --match-allocations Free hugepages exactly as allocated
  --huge-worker-stack[=size]
                      Allocate worker thread stacks from hugepage memory.
                      Size is in units of kbytes and defaults to system
                      thread stack size if not specified.

Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '-l' '1-' 

Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 64
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<level> Set global log level
  --log-level=<type-match>:<level>
                      Set specific log level
  --log-level=help    Show log types and levels
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink[=existing|always|never]
                      When to unlink files in hugetlbfs
                      ('existing' by default, no value means 'always')
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL Linux options:
  --socket-mem        Memory to allocate on sockets (comma separated values)
  --socket-limit      Limit memory allocation on sockets (comma separated values)
  --huge-dir          Directory where hugetlbfs is mounted
  --file-prefix       Prefix for hugepage filenames
  --create-uio-dev    Create /dev/uioX (usually done by hotplug)
  --vfio-intr         Interrupt mode for VFIO (legacy|msi|msix)
  --vfio-vf-token     VF token (UUID) shared between SR-IOV PF and VFs
  --legacy-mem        Legacy memory mode (no dynamic allocation, contiguous segments)
  --single-file-segments Put all hugepage memory in single files
  --match-allocations Free hugepages exactly as allocated
  --huge-worker-stack[=size]
                      Allocate worker thread stacks from hugepage memory.
                      Size is in units of kbytes and defaults to system
                      thread stack size if not specified.

Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '-l' '1,' 

Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 64
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<level> Set global log level
  --log-level=<type-match>:<level>
                      Set specific log level
  --log-level=help    Show log types and levels
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink[=existing|always|never]
                      When to unlink files in hugetlbfs
                      ('existing' by default, no value means 'always')
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL Linux options:
  --socket-mem        Memory to allocate on sockets (comma separated values)
  --socket-limit      Limit memory allocation on sockets (comma separated values)
  --huge-dir          Directory where hugetlbfs is mounted
  --file-prefix       Prefix for hugepage filenames
  --create-uio-dev    Create /dev/uioX (usually done by hotplug)
  --vfio-intr         Interrupt mode for VFIO (legacy|msi|msix)
  --vfio-vf-token     VF token (UUID) shared between SR-IOV PF and VFs
  --legacy-mem        Legacy memory mode (no dynamic allocation, contiguous segments)
  --single-file-segments Put all hugepage memory in single files
  --match-allocations Free hugepages exactly as allocated
  --huge-worker-stack[=size]
                      Allocate worker thread stacks from hugepage memory.
                      Size is in units of kbytes and defaults to system
                      thread stack size if not specified.

Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '-l' '1#2' 

Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 64
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<level> Set global log level
  --log-level=<type-match>:<level>
                      Set specific log level
  --log-level=help    Show log types and levels
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink[=existing|always|never]
                      When to unlink files in hugetlbfs
                      ('existing' by default, no value means 'always')
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL Linux options:
  --socket-mem        Memory to allocate on sockets (comma separated values)
  --socket-limit      Limit memory allocation on sockets (comma separated values)
  --huge-dir          Directory where hugetlbfs is mounted
  --file-prefix       Prefix for hugepage filenames
  --create-uio-dev    Create /dev/uioX (usually done by hotplug)
  --vfio-intr         Interrupt mode for VFIO (legacy|msi|msix)
  --vfio-vf-token     VF token (UUID) shared between SR-IOV PF and VFs
  --legacy-mem        Legacy memory mode (no dynamic allocation, contiguous segments)
  --single-file-segments Put all hugepage memory in single files
  --match-allocations Free hugepages exactly as allocated
  --huge-worker-stack[=size]
                      Allocate worker thread stacks from hugepage memory.
                      Size is in units of kbytes and defaults to system
                      thread stack size if not specified.

Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '-l' '-5' 

Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 64
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<level> Set global log level
  --log-level=<type-match>:<level>
                      Set specific log level
  --log-level=help    Show log types and levels
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink[=existing|always|never]
                      When to unlink files in hugetlbfs
                      ('existing' by default, no value means 'always')
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL Linux options:
  --socket-mem        Memory to allocate on sockets (comma separated values)
  --socket-limit      Limit memory allocation on sockets (comma separated values)
  --huge-dir          Directory where hugetlbfs is mounted
  --file-prefix       Prefix for hugepage filenames
  --create-uio-dev    Create /dev/uioX (usually done by hotplug)
  --vfio-intr         Interrupt mode for VFIO (legacy|msi|msix)
  --vfio-vf-token     VF token (UUID) shared between SR-IOV PF and VFs
  --legacy-mem        Legacy memory mode (no dynamic allocation, contiguous segments)
  --single-file-segments Put all hugepage memory in single files
  --match-allocations Free hugepages exactly as allocated
  --huge-worker-stack[=size]
                      Allocate worker thread stacks from hugepage memory.
                      Size is in units of kbytes and defaults to system
                      thread stack size if not specified.

Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '-l' '-5-7' 

Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 64
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<level> Set global log level
  --log-level=<type-match>:<level>
                      Set specific log level
  --log-level=help    Show log types and levels
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink[=existing|always|never]
                      When to unlink files in hugetlbfs
                      ('existing' by default, no value means 'always')
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL Linux options:
  --socket-mem        Memory to allocate on sockets (comma separated values)
  --socket-limit      Limit memory allocation on sockets (comma separated values)
  --huge-dir          Directory where hugetlbfs is mounted
  --file-prefix       Prefix for hugepage filenames
  --create-uio-dev    Create /dev/uioX (usually done by hotplug)
  --vfio-intr         Interrupt mode for VFIO (legacy|msi|msix)
  --vfio-vf-token     VF token (UUID) shared between SR-IOV PF and VFs
  --legacy-mem        Legacy memory mode (no dynamic allocation, contiguous segments)
  --single-file-segments Put all hugepage memory in single files
  --match-allocations Free hugepages exactly as allocated
  --huge-worker-stack[=size]
                      Allocate worker thread stacks from hugepage memory.
                      Size is in units of kbytes and defaults to system
                      thread stack size if not specified.

Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '-l' '64' 

Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 64
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<level> Set global log level
  --log-level=<type-match>:<level>
                      Set specific log level
  --log-level=help    Show log types and levels
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink[=existing|always|never]
                      When to unlink files in hugetlbfs
                      ('existing' by default, no value means 'always')
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL Linux options:
  --socket-mem        Memory to allocate on sockets (comma separated values)
  --socket-limit      Limit memory allocation on sockets (comma separated values)
  --huge-dir          Directory where hugetlbfs is mounted
  --file-prefix       Prefix for hugepage filenames
  --create-uio-dev    Create /dev/uioX (usually done by hotplug)
  --vfio-intr         Interrupt mode for VFIO (legacy|msi|msix)
  --vfio-vf-token     VF token (UUID) shared between SR-IOV PF and VFs
  --legacy-mem        Legacy memory mode (no dynamic allocation, contiguous segments)
  --single-file-segments Put all hugepage memory in single files
  --match-allocations Free hugepages exactly as allocated
  --huge-worker-stack[=size]
                      Allocate worker thread stacks from hugepage memory.
                      Size is in units of kbytes and defaults to system
                      thread stack size if not specified.

Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '-l' '1-64' 

Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 64
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<level> Set global log level
  --log-level=<type-match>:<level>
                      Set specific log level
  --log-level=help    Show log types and levels
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink[=existing|always|never]
                      When to unlink files in hugetlbfs
                      ('existing' by default, no value means 'always')
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL Linux options:
  --socket-mem        Memory to allocate on sockets (comma separated values)
  --socket-limit      Limit memory allocation on sockets (comma separated values)
  --huge-dir          Directory where hugetlbfs is mounted
  --file-prefix       Prefix for hugepage filenames
  --create-uio-dev    Create /dev/uioX (usually done by hotplug)
  --vfio-intr         Interrupt mode for VFIO (legacy|msi|msix)
  --vfio-vf-token     VF token (UUID) shared between SR-IOV PF and VFs
  --legacy-mem        Legacy memory mode (no dynamic allocation, contiguous segments)
  --single-file-segments Put all hugepage memory in single files
  --match-allocations Free hugepages exactly as allocated
  --huge-worker-stack[=size]
                      Allocate worker thread stacks from hugepage memory.
                      Size is in units of kbytes and defaults to system
                      thread stack size if not specified.

Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '-l' '1-2,3' 

Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 64
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<level> Set global log level
  --log-level=<type-match>:<level>
                      Set specific log level
  --log-level=help    Show log types and levels
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink[=existing|always|never]
                      When to unlink files in hugetlbfs
                      ('existing' by default, no value means 'always')
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL Linux options:
  --socket-mem        Memory to allocate on sockets (comma separated values)
  --socket-limit      Limit memory allocation on sockets (comma separated values)
  --huge-dir          Directory where hugetlbfs is mounted
  --file-prefix       Prefix for hugepage filenames
  --create-uio-dev    Create /dev/uioX (usually done by hotplug)
  --vfio-intr         Interrupt mode for VFIO (legacy|msi|msix)
  --vfio-vf-token     VF token (UUID) shared between SR-IOV PF and VFs
  --legacy-mem        Legacy memory mode (no dynamic allocation, contiguous segments)
  --single-file-segments Put all hugepage memory in single files
  --match-allocations Free hugepages exactly as allocated
  --huge-worker-stack[=size]
                      Allocate worker thread stacks from hugepage memory.
                      Size is in units of kbytes and defaults to system
                      thread stack size if not specified.

Error - process did not run ok with valid corelist value
Test Failed
RTE>>
-------------------------------------stderr-------------------------------------
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
APP: HPET is not enabled, using TSC as default timer
EAL: Detected CPU lcores: 1
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket_3095382_3cd8d0912e31
EAL: Selected IOVA mode 'PA'
/home/zhoumin/gh_dpdk/build/app/dpdk-test: option requires an argument -- 'c'
EAL: Detected CPU lcores: 1
EAL: Detected NUMA nodes: 8
/home/zhoumin/gh_dpdk/build/app/dpdk-test: option requires an argument -- 'c'
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 1
EAL: Detected NUMA nodes: 8
EAL: invalid characters in coremask: [error]
EAL: invalid coremask syntax
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 1
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket_3095387_3cd8d131b5a7
EAL: Selected IOVA mode 'PA'
/home/zhoumin/gh_dpdk/build/app/dpdk-test: option requires an argument -- 'l'
EAL: Detected CPU lcores: 1
EAL: Detected NUMA nodes: 8
/home/zhoumin/gh_dpdk/build/app/dpdk-test: option requires an argument -- 'l'
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 1
EAL: Detected NUMA nodes: 8
EAL: invalid core list syntax
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 1
EAL: Detected NUMA nodes: 8
EAL: invalid core list syntax
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 1
EAL: Detected NUMA nodes: 8
EAL: invalid core list syntax
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 1
EAL: Detected NUMA nodes: 8
EAL: invalid core list syntax
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 1
EAL: Detected NUMA nodes: 8
EAL: invalid core list syntax
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 1
EAL: Detected NUMA nodes: 8
EAL: invalid core list syntax
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 1
EAL: Detected NUMA nodes: 8
EAL: invalid core list syntax
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 1
EAL: Detected NUMA nodes: 8
EAL: lcore 64 >= RTE_MAX_LCORE (64)
EAL: To use high physical core ids, please use --lcores to map them to lcore ids below RTE_MAX_LCORE, e.g. --lcores 0 at 64
EAL: invalid core list syntax
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 1
EAL: Detected NUMA nodes: 8
EAL: lcore 64 >= RTE_MAX_LCORE (64)
EAL: To use high physical core ids, please use --lcores to map them to lcore ids below RTE_MAX_LCORE, e.g. --lcores 0 at 1,1 at 2,2 at 3,3 at 4,4 at 5,5 at 6,6 at 7,7 at 8,8 at 9,9 at 10,10 at 11,11 at 12,12 at 13,13 at 14,14 at 15,15 at 16,16 at 17,17 at 18,18 at 19,19 at 20,20 at 21,21 at 22,22 at 23,23 at 24,24 at 25,25 at 26,26 at 27,27 at 28,28 at 29,29 at 30,30 at 31,31 at 32,32 at 33,33 at 34,34 at 35,35 at 36,36 at 37,37 at 38,38 at 39,39 at 40,40 at 41,41 at 42,42 at 43,43 at 44,44 at 45,45 at 46,46 at 47,47 at 48,48 at 49,49 at 50,50 at 51,51 at 52,52 at 53,53 at 54,54 at 55,55 at 56,56 at 57,57 at 58,58 at 59,59 at 60,60 at 61,61 at 62,62 at 63,63 at 64
EAL: invalid core list syntax
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 1
EAL: Detected NUMA nodes: 8
EAL: lcore 1 unavailable
EAL: lcore 2 unavailable
EAL: lcore 3 unavailable
EAL: invalid core list, please check specified cores are part of 0
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.

================================================================================
DPDK:fast-tests / eal_flags_main_opt_autotest: FAIL
================================================================================
-------------------------------------stdout-------------------------------------
RTE>>eal_flags_main_opt_autotest
Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '-c' '3' '--main-lcore' 

Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 64
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<level> Set global log level
  --log-level=<type-match>:<level>
                      Set specific log level
  --log-level=help    Show log types and levels
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink[=existing|always|never]
                      When to unlink files in hugetlbfs
                      ('existing' by default, no value means 'always')
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL Linux options:
  --socket-mem        Memory to allocate on sockets (comma separated values)
  --socket-limit      Limit memory allocation on sockets (comma separated values)
  --huge-dir          Directory where hugetlbfs is mounted
  --file-prefix       Prefix for hugepage filenames
  --create-uio-dev    Create /dev/uioX (usually done by hotplug)
  --vfio-intr         Interrupt mode for VFIO (legacy|msi|msix)
  --vfio-vf-token     VF token (UUID) shared between SR-IOV PF and VFs
  --legacy-mem        Legacy memory mode (no dynamic allocation, contiguous segments)
  --single-file-segments Put all hugepage memory in single files
  --match-allocations Free hugepages exactly as allocated
  --huge-worker-stack[=size]
                      Allocate worker thread stacks from hugepage memory.
                      Size is in units of kbytes and defaults to system
                      thread stack size if not specified.

Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '-c' '3' '--main-lcore' '-1' 

Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 64
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<level> Set global log level
  --log-level=<type-match>:<level>
                      Set specific log level
  --log-level=help    Show log types and levels
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink[=existing|always|never]
                      When to unlink files in hugetlbfs
                      ('existing' by default, no value means 'always')
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL Linux options:
  --socket-mem        Memory to allocate on sockets (comma separated values)
  --socket-limit      Limit memory allocation on sockets (comma separated values)
  --huge-dir          Directory where hugetlbfs is mounted
  --file-prefix       Prefix for hugepage filenames
  --create-uio-dev    Create /dev/uioX (usually done by hotplug)
  --vfio-intr         Interrupt mode for VFIO (legacy|msi|msix)
  --vfio-vf-token     VF token (UUID) shared between SR-IOV PF and VFs
  --legacy-mem        Legacy memory mode (no dynamic allocation, contiguous segments)
  --single-file-segments Put all hugepage memory in single files
  --match-allocations Free hugepages exactly as allocated
  --huge-worker-stack[=size]
                      Allocate worker thread stacks from hugepage memory.
                      Size is in units of kbytes and defaults to system
                      thread stack size if not specified.

Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '-c' '3' '--main-lcore' 'X' 

Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 64
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<level> Set global log level
  --log-level=<type-match>:<level>
                      Set specific log level
  --log-level=help    Show log types and levels
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink[=existing|always|never]
                      When to unlink files in hugetlbfs
                      ('existing' by default, no value means 'always')
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL Linux options:
  --socket-mem        Memory to allocate on sockets (comma separated values)
  --socket-limit      Limit memory allocation on sockets (comma separated values)
  --huge-dir          Directory where hugetlbfs is mounted
  --file-prefix       Prefix for hugepage filenames
  --create-uio-dev    Create /dev/uioX (usually done by hotplug)
  --vfio-intr         Interrupt mode for VFIO (legacy|msi|msix)
  --vfio-vf-token     VF token (UUID) shared between SR-IOV PF and VFs
  --legacy-mem        Legacy memory mode (no dynamic allocation, contiguous segments)
  --single-file-segments Put all hugepage memory in single files
  --match-allocations Free hugepages exactly as allocated
  --huge-worker-stack[=size]
                      Allocate worker thread stacks from hugepage memory.
                      Size is in units of kbytes and defaults to system
                      thread stack size if not specified.

Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '-c' '3' '--main-lcore' '2' 

Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 64
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<level> Set global log level
  --log-level=<type-match>:<level>
                      Set specific log level
  --log-level=help    Show log types and levels
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink[=existing|always|never]
                      When to unlink files in hugetlbfs
                      ('existing' by default, no value means 'always')
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL Linux options:
  --socket-mem        Memory to allocate on sockets (comma separated values)
  --socket-limit      Limit memory allocation on sockets (comma separated values)
  --huge-dir          Directory where hugetlbfs is mounted
  --file-prefix       Prefix for hugepage filenames
  --create-uio-dev    Create /dev/uioX (usually done by hotplug)
  --vfio-intr         Interrupt mode for VFIO (legacy|msi|msix)
  --vfio-vf-token     VF token (UUID) shared between SR-IOV PF and VFs
  --legacy-mem        Legacy memory mode (no dynamic allocation, contiguous segments)
  --single-file-segments Put all hugepage memory in single files
  --match-allocations Free hugepages exactly as allocated
  --huge-worker-stack[=size]
                      Allocate worker thread stacks from hugepage memory.
                      Size is in units of kbytes and defaults to system
                      thread stack size if not specified.

Running binary with argv[]:'/home/zhoumin/gh_dpdk/build/app/dpdk-test' '--file-prefix=rte' '--proc-type=secondary' '-c' '3' '--main-lcore' '1' 

Usage: /home/zhoumin/gh_dpdk/build/app/dpdk-test [options]

EAL common options:
  -c COREMASK         Hexadecimal bitmask of cores to run on
  -l CORELIST         List of cores to run on
                      The argument format is <c1>[-c2][,c3[-c4],...]
                      where c1, c2, etc are core indexes between 0 and 64
  --lcores COREMAP    Map lcore set to physical cpu set
                      The argument format is
                            '<lcores[@cpus]>[<,lcores[@cpus]>...]'
                      lcores and cpus list are grouped by '(' and ')'
                      Within the group, '-' is used for range separator,
                      ',' is used for single number separator.
                      '( )' can be omitted for single element group,
                      '@' can be omitted if cpus and lcores have the same value
  -s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
  --main-lcore ID     Core ID that is used as main
  --mbuf-pool-ops-name Pool ops name for mbuf to use
  -n CHANNELS         Number of memory channels
  -m MB               Memory to allocate (see also --socket-mem)
  -r RANKS            Force number of memory ranks (don't detect)
  -b, --block         Add a device to the blocked list.
                      Prevent EAL from using this device. The argument
                      format for PCI devices is <domain:bus:devid.func>.
  -a, --allow         Add a device to the allow list.
                      Only use the specified devices. The argument format
                      for PCI devices is <[domain:]bus:devid.func>.
                      This option can be present several times.
                      [NOTE: allow cannot be used with block option]
  --vdev              Add a virtual device.
                      The argument format is <driver><id>[,key=val,...]
                      (ex: --vdev=net_pcap0,iface=eth2).
  --iova-mode   Set IOVA mode. 'pa' for IOVA_PA
                      'va' for IOVA_VA
  -d LIB.so|DIR       Add a driver or driver directory
                      (can be used multiple times)
  --vmware-tsc-map    Use VMware TSC map instead of native RDTSC
  --proc-type         Type of this process (primary|secondary|auto)
  --syslog            Set syslog facility
  --log-level=<level> Set global log level
  --log-level=<type-match>:<level>
                      Set specific log level
  --log-level=help    Show log types and levels
  --trace=<regex-match>
                      Enable trace based on regular expression trace name.
                      By default, the trace is disabled.
		      User must specify this option to enable trace.
  --trace-dir=<directory path>
                      Specify trace directory for trace output.
                      By default, trace output will created at
                      $HOME directory and parameter must be
                      specified once only.
  --trace-bufsz=<int>
                      Specify maximum size of allocated memory
                      for trace output for each thread. Valid
                      unit can be either 'B|K|M' for 'Bytes',
                      'KBytes' and 'MBytes' respectively.
                      Default is 1MB and parameter must be
                      specified once only.
  --trace-mode=<o[verwrite] | d[iscard]>
                      Specify the mode of update of trace
                      output file. Either update on a file can
                      be wrapped or discarded when file size
                      reaches its maximum limit.
                      Default mode is 'overwrite' and parameter
                      must be specified once only.
  -v                  Display version information on startup
  -h, --help          This help
  --in-memory   Operate entirely in memory. This will
                      disable secondary process support
  --base-virtaddr     Base virtual address
  --telemetry   Enable telemetry support (on by default)
  --no-telemetry   Disable telemetry support
  --force-max-simd-bitwidth Force the max SIMD bitwidth

EAL options for DEBUG use only:
  --huge-unlink[=existing|always|never]
                      When to unlink files in hugetlbfs
                      ('existing' by default, no value means 'always')
  --no-huge           Use malloc instead of hugetlbfs
  --no-pci            Disable PCI
  --no-hpet           Disable HPET
  --no-shconf         No shared config (mmap'd files)

EAL Linux options:
  --socket-mem        Memory to allocate on sockets (comma separated values)
  --socket-limit      Limit memory allocation on sockets (comma separated values)
  --huge-dir          Directory where hugetlbfs is mounted
  --file-prefix       Prefix for hugepage filenames
  --create-uio-dev    Create /dev/uioX (usually done by hotplug)
  --vfio-intr         Interrupt mode for VFIO (legacy|msi|msix)
  --vfio-vf-token     VF token (UUID) shared between SR-IOV PF and VFs
  --legacy-mem        Legacy memory mode (no dynamic allocation, contiguous segments)
  --single-file-segments Put all hugepage memory in single files
  --match-allocations Free hugepages exactly as allocated
  --huge-worker-stack[=size]
                      Allocate worker thread stacks from hugepage memory.
                      Size is in units of kbytes and defaults to system
                      thread stack size if not specified.

Error - process did not run ok with valid --main-lcore
Test Failed
RTE>>
-------------------------------------stderr-------------------------------------
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
APP: HPET is not enabled, using TSC as default timer
/home/zhoumin/gh_dpdk/build/app/dpdk-test: option '--main-lcore' requires an argument
EAL: Detected CPU lcores: 1
EAL: Detected NUMA nodes: 8
EAL: lcore 1 unavailable
EAL: invalid coremask, please check specified cores are part of 0
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 1
EAL: Detected NUMA nodes: 8
EAL: lcore 1 unavailable
EAL: invalid coremask, please check specified cores are part of 0
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 1
EAL: Detected NUMA nodes: 8
EAL: lcore 1 unavailable
EAL: invalid coremask, please check specified cores are part of 0
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 1
EAL: Detected NUMA nodes: 8
EAL: lcore 1 unavailable
EAL: invalid coremask, please check specified cores are part of 0
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 1
EAL: Detected NUMA nodes: 8
EAL: lcore 1 unavailable
EAL: invalid coremask, please check specified cores are part of 0
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.



More information about the test-report mailing list