[dpdk-users] [pktgen] A sequence command doen't work
Wiles, Keith
keith.wiles at intel.com
Sat Jul 22 19:12:22 CEST 2017
> On Jul 20, 2017, at 8:28 PM, Tetsuro Nakamura <xyz1.8tn at gmail.com> wrote:
>
> Hi all,
>
>
> I moved from using pktgen3.0.13 to pktgen3.3.4
>
> But sequence commands dont work as well on pktgen3.3.4.
I found the problem and push a new version pktgen-3.3.5 please give that one a try.
>
>
> ```````
>
> Pktgen:/> set 0 seq_cnt 2
>
> # It works
>
>
> Pktgen:/> sequence 0 0 0c:c4:7a:cf:66:11 0c:c4:7a:cf:66:01 192.168.1.1
> 192.168.0.1/24 1234 5678 ipv4 udp 1 64
> Sequence invalid command:
> Invalid line: <sequence 0 0 0c:c4:7a:cf:66:11 0c:c4:7a:cf:66:01
> 192.168.1.1 192.168.0.1/24 1234 5678 ipv4 udp 1 64 >
>
> # doen't work though the command works on pktgen3.0.13
>
>
> Pktgen:/> sequence 0 0 0c:c4:7a:cf:66:11 0c:c4:7a:cf:66:01 192.168.1.1
> 192.168.0.1 1234 5678 ipv4 udp 1 64
> Sequence invalid command:
> Invalid line: <sequence 0 0 0c:c4:7a:cf:66:11 0c:c4:7a:cf:66:01
> 192.168.1.1 192.168.0.1 1234 5678 ipv4 udp 1 64 >
>
> # without networkmask specification doen't work as well
>
> ```````
>
> page seq works but shows the same sequences.
> ```
>
> Port: 0, Sequence Count: 2 of 16
> GTPu
> Seq: Dst MAC Src MAC Dst IP
> Src IP Port S/D Protocol:VLAN Size TEID
> * 0: 00:00:00:00:00:00 0c:c4:7a:cf:66:c4 192.168.1.1
> 192.168.0.1/24 1234/5678 IPv4/TCP:0001 64 0
> * 1: 00:00:00:00:00:00 0c:c4:7a:cf:66:c4 192.168.1.1
> 192.168.0.1/24 1234/5678 IPv4/TCP:0001 64 0
>
> ```
>
> Is this a known problem?
> Are there any way to work around?
>
> Thanks in advance.
> Tetsuro Nakamura
Regards,
Keith
More information about the users
mailing list