[dpdk-users] Regarding Issues in Compilation of DPDK 16.04/16.11 on CentOS 6.9 ( 64 Bit)

Puneet Singh singh1989p at gmail.com
Sun May 13 08:45:36 CEST 2018


Hi,

 uname -r
2.6.32-696.28.1.el6.x86_64

cat /etc/redhat-release
CentOS release 6.9 (Final)



Thanks and Regards
Puneet Singh


On Sun 13 May, 2018, 12:09 PM Rosen, Rami, <rami.rosen at intel.com> wrote:

> Hi,
>
> What does “uname -r’ show ?
>
>
>
> Rami Rosen
>
>
>
> *From:* Puneet Singh [mailto:singh1989p at gmail.com]
> *Sent:* Sunday, May 13, 2018 09:02
> *To:* Rosen, Rami <rami.rosen at intel.com>
> *Cc:* users at dpdk.org
> *Subject:* Re: [dpdk-users] Regarding Issues in Compilation of DPDK
> 16.04/16.11 on CentOS 6.9 ( 64 Bit)
>
>
>
> Hi ,
>
>
>
>  Thanks for the prompt response. Is there any other alternative through
> which i can compile dpdk igb driver on centos 6.9.? Any other lower version
> of dpdk.? I have tried dpdk 2.0, 2.1, 2.2 versions but no success. Google
> cloud by default provide CentOs 6.9 VM image.
>
>
>
>
>
> Thanks and Regards
>
> Puneet Singh
>
>
>
> On Sun 13 May, 2018, 10:43 AM Rosen, Rami, <rami.rosen at intel.com> wrote:
>
> Hi, Singh,
>
> It seems  the kernel version you are building against does not support
> DPDK 16.04 IGB kernel module.
>
> If it OK for you to bind DPDK with alternate modules, like
> uio_pci_generic, which
> I assume comes with your CentOS (you can check with "modinfo
> uio_pci_generic"), then
> you can try disabling the build of igb_uio by setting
> CONFIG_RTE_EAL_IGB_UIO=y
> in build/.config and running "make" again.
>
> Note: you may encounter errors also when building KNI kernel module, and
> if so,
> you can avoid them by disabling build of KNI kernel module with setting
> CONFIG_RTE_KNI_KMOD=n in build/.config (unless you need KNI).
>
> Regards,
> Rami Rosen
>
>
> -----Original Message-----
> From: users [mailto:users-bounces at dpdk.org] On Behalf Of Puneet Singh
> Sent: Friday, May 11, 2018 15:28
> To: users at dpdk.org
> Subject: [dpdk-users] Regarding Issues in Compilation of DPDK 16.04/16.11
> on CentOS 6.9 ( 64 Bit)
>
> Hi Everyone,
>
>
>
> I am trying to compile DPDK SDK  v16.04/v16.11 on CentOS 6.9 64 Bit ,
> Following error is coming.
>
>
>
> Can some one guide me to resolve following issue
>
>
>
> INSTALL-LIB librte_eal.a
>
> == Build lib/librte_eal/linuxapp/igb_uio
>
>   LD      /home/dpdk-16.04/x86_64-native-linuxapp-gcc/build/lib/
> librte_eal/linuxapp/igb_uio/built-in.o
>
>   CC [M]  /home/dpdk-16.04/x86_64-native-linuxapp-gcc/build/lib/
> librte_eal/linuxapp/igb_uio/igb_uio.o
>
> /home/dpdk-16.04/x86_64-native-linuxapp-gcc/build/lib/
> librte_eal/linuxapp/igb_uio/igb_uio.c:
> In function ‘igbuio_msix_mask_irq’:
>
> /home/dpdk-16.04/x86_64-native-linuxapp-gcc/build/lib/
> librte_eal/linuxapp/igb_uio/igb_uio.c:157:
> error: ‘PCI_MSIX_ENTRY_CTRL_MASKBIT’ undeclared (first use in this
> function)
>
> /home/dpdk-16.04/x86_64-native-linuxapp-gcc/build/lib/
> librte_eal/linuxapp/igb_uio/igb_uio.c:157:
> error: (Each undeclared identifier is reported only once
>
> /home/dpdk-16.04/x86_64-native-linuxapp-gcc/build/lib/
> librte_eal/linuxapp/igb_uio/igb_uio.c:157:
> error: for each function it appears in.)
>
> make[10]: *** [/home/dpdk-16.04/x86_64-native-linuxapp-gcc/build/lib/
> librte_eal/linuxapp/igb_uio/igb_uio.o]
> Error 1
>
> make[9]: *** [_module_/home/dpdk-16.04/x86_64-native-linuxapp-gcc/build/
> lib/librte_eal/linuxapp/igb_uio]
> Error 2
>
> make[8]: *** [sub-make] Error 2
>
> make[7]: *** [igb_uio.ko] Error 2
>
> make[6]: *** [igb_uio] Error 2
>
> make[5]: *** [linuxapp] Error 2
>
> make[4]: *** [librte_eal] Error 2
>
> make[3]: *** [lib] Error 2
>
> make[2]: *** [all] Error 2
>
> make[1]: *** [pre_install] Error 2
>
> make: *** [install] Error 2
>
>
>
>  Thanks & Regards
>
> Puneet Singh
>
>


More information about the users mailing list