[dpdk-users] Crypto QAT device not found

Pathak, Pravin pravin.pathak at intel.com
Sat Oct 20 00:01:13 CEST 2018


Hi Fiona -
That explains it. I was using make T=... again at last.
Pravin


-----Original Message-----
From: Trahe, Fiona 
Sent: Friday, October 19, 2018 5:40 PM
To: Pathak, Pravin <pravin.pathak at intel.com>; users at dpdk.org
Cc: Trahe, Fiona <fiona.trahe at intel.com>
Subject: RE: Crypto QAT device not found

Hi Pravin,

Good that it's working now.
Be careful of the order on changing config, this works:
1. make T=x86_64-native-linuxapp-gcc config 2. change build/.config (if you do make T=xx config after this it overwrites your changes and reverts to the default again) 3. make

Fiona

> -----Original Message-----
> From: Pathak, Pravin
> Sent: Friday, October 19, 2018 2:00 PM
> To: Trahe, Fiona <fiona.trahe at intel.com>; users at dpdk.org
> Subject: RE: Crypto QAT device not found
> 
> Hi Fiona -
> 
> Thanks for the help.  I was using 18.05 and then moved to 18.08.
> For configuration changes, there is  build/.config,    config/common_base and x86_64-native-linuxapp-
> gcc/.config.
> I was changing build/.config and building but some reason it was not picking the new options set.
> Now I changed common_base, regenerated config and build again. It worked after that.
> I think I am not following correct build procedure.
> There is make,   make T= x86_64-native-linuxapp-gcc, make install...
> Each seems to work differently.
> 
> I am able to use HW crypto device now.
> 
> Regards
> Pravin
> 
> 
> -----Original Message-----
> From: Trahe, Fiona
> Sent: Friday, October 19, 2018 4:25 PM
> To: Pathak, Pravin <pravin.pathak at intel.com>; users at dpdk.org
> Cc: Trahe, Fiona <fiona.trahe at intel.com>
> Subject: RE: Crypto QAT device not found
> 
> Hi Pravin,
> 
> As your VFs are bound to igb_uio this looks fine.
> DPDK QAT PMD does support 37c9
> 
> Can you confirm which DPDK version you're using? You mentioned 18.04 but there's no such release.
> If it's 18.08 then you also need CONFIG_RTE_LIBRTE_PMD_QAT_SYM=y but not in earlier releases.
> 
> Does the test code run for you?
> run "make test-build" in the top-level directory 
> ./build/build/test/test/test -l1 -n1 -w <your bdf>
> >cryptodev_qat_autotest
> 
> Fiona
> > -----Original Message-----
> > From: Pathak, Pravin
> > Sent: Friday, October 19, 2018 11:26 AM
> > To: Trahe, Fiona <fiona.trahe at intel.com>; users at dpdk.org
> > Subject: RE: Crypto QAT device not found
> >
> > Hi Fiona -
> > Thanks for the reply. I tried -cdev_type HW  but it did not help.  I 
> > am not sure of DPDK supports the device on our board.
> > Device is with ID 37c8/c9
> >
> > 3d:00.0 Co-processor: Intel Corporation Device 37c8 (rev 04)
> > 3f:00.0 Co-processor: Intel Corporation Device 37c8 (rev 04)
> > da:00.0 Co-processor: Intel Corporation Device 37c8 (rev 04)
> > 3d:01.0 Co-processor: Intel Corporation Device 37c9 (rev 04)
> > 3d:01.1 Co-processor: Intel Corporation Device 37c9 (rev 04)
> > 3d:01.2 Co-processor: Intel Corporation Device 37c9 (rev 04)
> > 3d:01.3 Co-processor: Intel Corporation Device 37c9 (rev 04) ........
> >
> > Everything looks correct except DPDK does not see these crypto 
> > devices. It seems virtual device if I add one.
> > Is there any command like argument I need to pass or build option 
> > other than CONFIG_RTE_LIBRTE_PMD_QAT=y
> >
> > PFs are bound to Kernel and VFs are bound to DPDK.
> >
> > Crypto devices using kernel driver
> > ==================================
> > 0000:3d:00.0 'Device 37c8' if= drv=c6xx unused=qat_c62x,igb_uio
> > 0000:3f:00.0 'Device 37c8' if= drv=c6xx unused=qat_c62x,igb_uio
> > 0000:da:00.0 'Device 37c8' if= drv=c6xx unused=qat_c62x,igb_uio
> >
> > Crypto devices using DPDK-compatible driver 
> > ===========================================
> > 0000:3d:01.0 'Device 37c9' drv=igb_uio unused=qat_c62xvf
> > 0000:3d:01.1 'Device 37c9' drv=igb_uio unused=qat_c62xvf
> > 0000:3d:01.2 'Device 37c9' drv=igb_uio unused=qat_c62xvf
> > 0000:3d:01.3 'Device 37c9' drv=igb_uio unused=qat_c62xvf
> > 0000:3d:01.4 'Device 37c9' drv=igb_uio unused=qat_c62xvf
> >
> > # Drivers loaded
> >
> > pkpathak at paamrpdk03:~/acp/snr/install$ lsmod | grep qat
> > qat_c62xvf             16384  0
> > qat_c62x               20480  0
> > intel_qat             163840  3 qat_c62x,qat_c62xvf,usdm_drv
> > uio                    20480  2 igb_uio,intel_qat
> > authenc                16384  1 intel_qat
> >
> > Anything you can spot incorrect or missing?
> > Regards
> > Pravin
> >
> > -----Original Message-----
> > From: Trahe, Fiona
> > Sent: Thursday, October 18, 2018 8:05 PM
> > To: Pathak, Pravin <pravin.pathak at intel.com>; users at dpdk.org
> > Subject: RE: Crypto QAT device not found
> >
> > Hi Pravin,
> > See below.
> >
> > > -----Original Message-----
> > > From: users [mailto:users-bounces at dpdk.org] On Behalf Of Pathak, 
> > > Pravin
> > > Sent: Thursday, October 18, 2018 2:30 PM
> > > To: users at dpdk.org
> > > Subject: [dpdk-users] Crypto QAT device not found
> > >
> > > Hi All -
> > > I have server with Intel QAT c62x device.  I followed all documentation.
> > >
> > > -        Rebuild DPDK to use QAT
> > >
> > > -        QAT drivers are loaded.
> > >
> > > -        QAT devices are bound to DPDK
> > >
> > >
> > > Crypto devices using DPDK-compatible driver 
> > > ===========================================
> > > 0000:3d:01.0 'Device 37c9' drv=igb_uio unused=qat_c62xvf,vfio-pci
> > > 0000:3d:01.1 'Device 37c9' drv=igb_uio unused=qat_c62xvf,vfio-pci
> > > 0000:3d:01.2 'Device 37c9' drv=igb_uio unused=qat_c62xvf,vfio-pci
> > > 0000:3d:01.3 'Device 37c9' drv=igb_uio unused=qat_c62xvf,vfio-pci
> > > 0000:3d:01.4 'Device 37c9' drv=igb_uio unused=qat_c62xvf,vfio-pci
> > > 0000:3d:01.5 'Device 37c9' drv=igb_uio unused=qat_c62xvf,vfio-pci
> > > 0000:3d:01.6 'Device 37c9' drv=igb_uio unused=qat_c62xvf,vfio-pci
> > > 0000:3d:01.7 'Device 37c9' drv=igb_uio unused=qat_c62xvf,vfio-pci
> > > 0000:3d:02.0 'Device 37c9' drv=igb_uio unused=qat_c62xvf,vfio-pci
> > > 0000:3d:02.1 'Device 37c9' drv=igb_uio unused=qat_c62xvf,vfio-pci
> > > 0000:3d:02.2 'Device 37c9' drv=igb_uio unused=qat_c62xvf,vfio-pci
> > >
> > > But if I use l2fwd-crypto sample, I get no crypto device found 
> > > error
> > >
> > > Checking link statusdone
> > > Port0 Link Up. Speed 1000 Mbps - full-duplex
> > > Port1 Link Up. Speed 1000 Mbps - full-duplex Lcore 0: RX port 0 
> > > Lcore
> > > 1: RX port 1 No crypto devices available
> > > EAL: Error - exiting with code: 1
> > >   Cause: Failed to initialize crypto devices
> > >
> > > It works if I add  virtual device --vdev "crypto_aesni_mb0" but I am not able to use HW device.
> > > Your help is appreciated.
> > >
> > > Thanks
> > > Pravin
> > [Fiona] I haven't used this tool for a while, but the command line 
> > options should be similar to the dpdk- test-crypto-perf tool. For 
> > that for QAT you should whitelist the
> device. e.g.:
> >  -w 0000:3d:01.0 ( before the -- , i.e. it's an EAL parameter) and 
> > use --devtype crypto_qat  (after the -- , it's a parameter for the application).
> > The terminology of --vdev changed in a recent release, so refer to 
> > the version of 
> > http://doc.dpdk.org/guides/sample_app_ug/l2_forward_crypto.html
> > for the cmdline options appropriate to the release you're using.
> > -cdev_type HW should also cause it to select QAT



More information about the users mailing list