[dpdk-users] i40e_dev_sync_phy_type errors

[CHIDAMBARAM, GOVIND (GOVIND)]

Any idea what is wrong? I see errors with i40e

i40e_dev_sync_phy_type(): Failed to sync phy type: status=-53


# lspci -k -s 0000:81:00.0
81:00.0 Ethernet controller: Intel Corporation Ethernet Controller X710 for 10GbE SFP+ (rev 01)
Subsystem: Hewlett-Packard Company Ethernet 10Gb 2-port 562SFP+ Adapter
Kernel driver in use: igb_uio
Kernel modules: i40e

# lspci -k -s 0000:c1:00.0
c1:00.0 Ethernet controller: Intel Corporation Ethernet Controller X710 for 10GbE SFP+ (rev 01)
Subsystem: Hewlett-Packard Company Ethernet 10Gb 2-port 562SFP+ Adapter
Kernel driver in use: igb_uio
Kernel modules: i40e


/dpdk-18.08/x86_64-native-linuxapp-gcc/app/testpmd -w 0000:81:00.0 -w 0000:81:00.1 -w 0000:c1:00.0 -w 0000:c1:00.1 -- -i --rxq=4 --txq=4 --forward-mode=rxonly

EAL: Detected 176 lcore(s)

EAL: Detected 4 NUMA nodes

EAL: Multi-process socket /var/run/dpdk/rte/mp_socket

EAL: No free hugepages reported in hugepages-1048576kB

EAL: Probing VFIO support...

EAL: PCI device 0000:81:00.0 on NUMA socket 2

EAL:   probe driver: 8086:1572 net_i40e

i40e_dev_sync_phy_type(): Failed to sync phy type: status=-53

EAL: PCI device 0000:81:00.1 on NUMA socket 2

EAL:   probe driver: 8086:1572 net_i40e

i40e_dev_sync_phy_type(): Failed to sync phy type: status=-53

EAL: PCI device 0000:c1:00.0 on NUMA socket 3

EAL:   probe driver: 8086:1572 net_i40e

i40e_dev_sync_phy_type(): Failed to sync phy type: status=-53

EAL: PCI device 0000:c1:00.1 on NUMA socket 3

EAL:   probe driver: 8086:1572 net_i40e

i40e_dev_sync_phy_type(): Failed to sync phy type: status=-53

Interactive-mode selected
Set rxonly packet forwarding mode
testpmd: create a new mbuf pool <mbuf_pool_socket_0>: n=1547456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
testpmd: create a new mbuf pool <mbuf_pool_socket_1>: n=1547456, size=2176, socket=1
testpmd: preferred mempool ops selected: ring_mp_mc
testpmd: create a new mbuf pool <mbuf_pool_socket_2>: n=1547456, size=2176, socket=2
testpmd: preferred mempool ops selected: ring_mp_mc
testpmd: create a new mbuf pool <mbuf_pool_socket_3>: n=1547456, size=2176, socket=3
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 2)
i40e_dev_sync_phy_type(): Failed to sync phy type: status=-53
Port 0: 48:DF:37:68:AF:B0
Configuring Port 1 (socket 2)
i40e_dev_sync_phy_type(): Failed to sync phy type: status=-53
Port 1: 48:DF:37:68:AF:B8
Configuring Port 2 (socket 3)
i40e_dev_sync_phy_type(): Failed to sync phy type: status=-53
Port 2: 48:DF:37:65:82:A0
Configuring Port 3 (socket 3)
i40e_dev_sync_phy_type(): Failed to sync phy type: status=-53
Port 3: 48:DF:37:65:82:A8
Checking link statuses...
Done

Cheers
CG