[dpdk-users] (no subject)

[satyavalli rama]

Hi Anoob and DPDK Dev Team,
------>While we are running the ipsec-secgw application. We are getting
following error:

IPSEC: No IPv6 SP Inbound rule specified
IPSEC: No IPv6 SP Outbound rule specified
Creating IPv4 Routing Table (RT) context with 1024 max routes
LPM: Adding route 192.168.122.0/24 (1)

------>Below are the steps we've performed..

Since we don't have IXGBE driver in the virtual machines. we used SRIOV to
import the IXGBE NIC's (Virtual function) from host(Physical function).
We refered the below link for SRIOV:
https://software.intel.com/content/www/us/en/develop/articles/configure-sr-iov-network-virtual-functions-in-linux-kvm.html

This the info after importing IXGBE NIC's into virtual machine:
-----------> ip link show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode
DEFAULT group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: ens8: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
UP mode DEFAULT group default qlen 1000
    link/ether 52:54:00:bd:f7:ce brd ff:ff:ff:ff:ff:ff
3: ens9: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
UP mode DEFAULT group default qlen 1000
    link/ether 52:54:00:e5:35:b5 brd ff:ff:ff:ff:ff:ff
4: ens12: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
UP mode DEFAULT group default qlen 1000
    link/ether 52:54:00:14:ce:7c brd ff:ff:ff:ff:ff:ff
5: ens13: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
UP mode DEFAULT group default qlen 1000
    link/ether 52:54:00:d0:73:4c brd ff:ff:ff:ff:ff:ff

6: ens3: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN
mode DEFAULT group default qlen 1000
    link/ether 96:42:49:cd:9c:61 brd ff:ff:ff:ff:ff:ff
 <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
7: ens11: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN
mode DEFAULT group default qlen 1000
    link/ether 3e:f5:92:ef:9e:16 brd ff:ff:ff:ff:ff:ff
 <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<


8: ens10: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
UP mode DEFAULT group default qlen 1000
    link/ether 52:54:00:51:ee:74 brd ff:ff:ff:ff:ff:ff
9: ens14: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
UP mode DEFAULT group default qlen 1000
    link/ether 52:54:00:da:08:cb brd ff:ff:ff:ff:ff:ff
10: ens15: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
state UP mode DEFAULT group default qlen 1000
    link/ether 52:54:00:31:7c:6f brd ff:ff:ff:ff:ff:ff

------>While we are running the ipsec-secgw application. We are getting
following error:

IPSEC: No IPv6 SP Inbound rule specified
IPSEC: No IPv6 SP Outbound rule specified
Creating IPv4 Routing Table (RT) context with 1024 max routes
LPM: Adding route 192.168.122.0/24 (1)

Checking link
status..........................................................................................done
Port 0 Link Down
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Port 1 Link Down
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
IPSEC: entering main loop on lcore 0
IPSEC:  -- lcoreid=0 portid=0 rxqueueid=0
IPSEC:  -- lcoreid=0 portid=1 rxqueueid=0

Please find the attachment which contain console logs.

Thanks and Regards