I need DPDK MLX5 Probe error support

[Thomas Monjalon]

27/09/2021 02:18, Jaeeun Ham:
> Hi,
> 
> I hope you are well.
> My name is Jaeeun Ham and I have been working for the Ericsson.
> 
> I am suffering from enabling MLX5 NIC, so could you take a look at how to run it?
> There are two pci address for the SRIOV(vfio) mlx5 nic support but it doesn't run correctly. (12:01.0, 12:01.1)
> 
> I started one process which is running inside the docker process that is on the MLX5 NIC support host server.
> The process started to run with following option.
>     -d /usr/local/lib/librte_net_mlx5.so
> And the docker process has mlx5 libraries as below.

Did you try on the host outside of any container?

Please could you try following commands (variables to be replaced)?

    dpdk-hugepages.py --reserve 1G
    ip link set $netdev netns $container
    docker run --cap-add SYS_NICE --cap-add IPC_LOCK --cap-add NET_ADMIN \
               --device /dev/infiniband/ $image
    echo show port summary all | dpdk-testpmd --in-memory -- -i



> 706a37a35d29:/usr/local/lib # ls -1 | grep mlx
> librte_common_mlx5.so
> librte_common_mlx5.so.21
> librte_common_mlx5.so.21.0
> librte_net_mlx5.so
> librte_net_mlx5.so.21
> librte_net_mlx5.so.21.0
> 
> But I failed to run the process with following error. (MIDHAUL_PCI_ADDR:0000:12:01.0, BACKHAUL_PCI_ADDR:0000:12:01.1)
> 
> ---
> 
> mlx5_pci: unable to recognize master/representors on the multiple IB devices
> common_mlx5: Failed to load driver = mlx5_pci.
> EAL: Requested device 0000:12:01.0 cannot be used
> mlx5_pci: unable to recognize master/representors on the multiple IB devices
> common_mlx5: Failed to load driver = mlx5_pci.
> EAL: Requested device 0000:12:01.1 cannot be used
> EAL: Bus (pci) probe failed.
> 
> ---
> 
> For the success case of pci address 12:01.2, it showed following messages.
> 
> ---
> 
> EAL: Detected 64 lcore(s)
> EAL: Detected 2 NUMA nodes
> EAL: Multi-process socket /var/run/dpdk/nah2/mp_socket
> EAL: Probing VFIO support...
> EAL: VFIO support initialized
> EAL: PCI device 0000:12:01.2 on NUMA socket 0
> EAL:   probe driver: 15b3:1016 net_mlx5
> net_mlx5: MPLS over GRE/UDP tunnel offloading disabled due to old OFED/rdma-core version or firmware configuration
> net_mlx5: port 0 the requested maximum Rx packet size (2056) is larger than a single mbuf (2048) and scattered mode has not been requested
> USER1: rte_ip_frag_table_create: allocated of 6291584 bytes at socket 0
> 
> ---
> 
> BR/Jaeeun