NIC is unavailable in DPDK application

[Danil Onishchenko]

Thank you for your reply!

On 29.03.2022 15:43, Дмитрий Степанов wrote:
> Hey!
> Realtek NICs are not supported by DPDK.
> You can check the list of supported HW here - 
> https://core.dpdk.org/supported/
> As a workaround you can setup virtual machine (e.g. using KVM) with 
> virtual NIC which is supported by DPDK (e.g. vmxnet3)
>
> BTW: here is an article where someone tried to write his own PMD for 
> Realtek NIC - 
> https://medium.com/powerof2/writing-a-pmd-for-dpdk-56e6388467a8
>
>
>
> вт, 29 мар. 2022 г. в 11:21, Danil Onishchenko 
> <danil.onishchenko.info at gmail.com>:
>
>     Hello,
>
>     I'm studying DPDK and trying to create a simple application,
>     however it
>     can't see a NIC bound to DPDK.
>
>     1. Here is a list of network devices I have on my machine
>
>     $ dpdk-devbind.py --status-dev net
>
>     Network devices using kernel driver
>     ===================================
>     0000:01:00.0 'RTL8111/8168/8411 PCI Express Gigabit Ethernet
>     Controller
>     8168' if=enp1s0 drv=r8169 unused=vfio-pci *Active*
>     0000:02:00.0 'RTL8822BE 802.11a/b/g/n/ac WiFi adapter b822' if=wlp2s0
>     drv=rtw_8822be unused=rtw88_8822be,vfio-pci *Active*
>
>     2. I disable my ethernet NIC (it can't be bound to DPDK while it is
>     active) and bind it to vfio-pci driver successfully
>
>     $ ip link set enp1s0 down
>     $ dpdk-devbind.py -b vfio-pci enp1s0
>
>     3. Now dpdk-devbind.py shows that the NIC is using DPDK-compatible
>     driver
>
>     $ dpdk-devbind.py --status-dev net
>
>     Network devices using DPDK-compatible driver
>     ============================================
>     0000:01:00.0 'RTL8111/8168/8411 PCI Express Gigabit Ethernet
>     Controller
>     8168' drv=vfio-pci unused=r8169
>
>     Network devices using kernel driver
>     ===================================
>     0000:02:00.0 'RTL8822BE 802.11a/b/g/n/ac WiFi adapter b822' if=wlp2s0
>     drv=rtw_8822be unused=rtw88_8822be,vfio-pci *Active*
>
>     4. However when I run any example DPDK application it says that there
>     are no available NIC ports. For instance I wrote a simple application
>
>     int main(int argc, char *argv[])
>     {
>          int ret;
>          int total_ports, avail_ports;
>
>          ret = rte_eal_init(argc, argv);
>          if( ret < 0 )
>              rte_exit(EXIT_FAILURE, "EAL initialization failed\n");
>
>          total_ports = rte_eth_dev_count_total();
>          avail_ports = rte_eth_dev_count_avail();
>          printf("ETH PORTS %d %d\n", total_ports, avail_ports);
>
>          rte_eal_cleanup();
>
>          return 0;
>     }
>
>     and both rte_eth_dev_count_total() and rte_eth_dev_count_avail()
>     return 0.
>
>     What am I doing wrong?
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mails.dpdk.org/archives/users/attachments/20220331/155980af/attachment.htm>