[ConnectX 6Dx]Issue using Tx scheduling feature in DPDK

[Asaf Penso]

Hello Antoine,

Have you had a look into mlx5 documentation?
http://doc.dpdk.org/guides/nics/mlx5.html
Please look for tx_pp.

I'm adding @Slava Ovsiienko<mailto:viacheslavo at nvidia.com> in case you need further support.

Regards,
Asaf Penso

From: Antoine POLLENUS <a.pollenus at deltacast.tv>
Sent: Thursday, April 28, 2022 3:25 PM
To: users at dpdk.org
Subject: [ConnectX 6Dx]Issue using Tx scheduling feature in DPDK

Hello,

DPDK Version: 21.11
Firmware version : 22.32.1010
MLNX_OFED version: MLNX_OFED_LINUX-5.5-1.0.3.2-ubuntu20.04-x86_64

We are trying to use the DPDK tx scheduling feature on a ConnectX6 DX adapter. We experience some issues with the feature not working.

The test is using Test-pmd in txonly mode.

Here are the command used:

sudo ./dpdk-testpmd -l 0-3 -n 4 -- -i --portmask=0x1 --nb-cores=1 --eth-peer=0,01:00:5e:00:00:08 --tx-ip=10.10.1.168,239.0.0.8
testpmd> set fwd txonly
testpmd> set burst 64
testpmd> set txtimes 1000000,10000

By doing this I expect the feature working. Am i missing something ?

I also added a print in txonly.c and clearly sees that the feature is not enabled

dynf = rte_mbuf_dynflag_lookup
(RTE_MBUF_DYNFLAG_TX_TIMESTAMP_NAME, NULL);
if (dynf >= 0)
timestamp_mask = 1ULL << dynf;
dynf = rte_mbuf_dynfield_lookup
(RTE_MBUF_DYNFIELD_TIMESTAMP_NAME, NULL);
if (dynf >= 0)
timestamp_off = dynf;

both function ( rte_mbuf_dynfield_lookup and rte_mbuf_dynflag_lookup) returns -1

I also tried to enabled the feature.

testpmd> port config 0 tx_offload send_on_timestamp on
but when doing this DPDK tells me that I don't have these offload capabilities

Hope you will be able to help me.

Regards

Antoine
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mails.dpdk.org/archives/users/attachments/20220502/14bed019/attachment.htm>