<div dir="ltr"><div>hello,</div><div><br></div><div>Recently I have bought one intel network card <br></div><div><br></div><div><a href="https://ark.intel.com/content/www/us/en/ark/products/210969/intel-ethernet-network-adapter-e8102cqda2.html">https://ark.intel.com/content/www/us/en/ark/products/210969/intel-ethernet-network-adapter-e8102cqda2.html</a></div><div><br></div><div>The moment I do devbind, cards are shutting down.</div><div><br></div><div>$ lspci | grep -i intel<br>c3:00.0 Ethernet controller: Intel Corporation Ethernet Controller E810-C for QSFP (rev 02)<br>c3:00.1 Ethernet controller: Intel Corporation Ethernet Controller E810-C for QSFP (rev 02)<br><br>$ sudo dpdk-devbind.py -b vfio-pci c3:00.0 c3:00.1<br><br>After this, cards are going down. EAL is giving following error</div><div><br></div><div>EAL: Requested device 0000:c3:00.1 cannot be used<br>EAL: Error - exiting with code: 1<br>Cause: Error: number of ports must be even</div><div><div><div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature"><div dir="ltr"><div><div dir="ltr"><div><div dir="ltr"><div><div dir="ltr"><div><div dir="ltr"><br></div><div>Did anyone face this issue or anyone know how to fix the issue?<br></div><div dir="ltr"><br>Thanks & Regards<br>--<br>Lokesh Chakka.<br></div></div></div></div></div></div></div></div></div></div></div></div></div>