[dpdk-dev] [PATCH 4/5] virtio: New API to enable/disable multicast and promisc mode

Stephen Hemminger stephen at networkplumber.org
Tue Aug 26 03:26:04 CEST 2014


On Tue, 26 Aug 2014 01:05:16 +0000
"Ouyang, Changchun" <changchun.ouyang at intel.com> wrote:

> Hi  Stephen,
> 
> My response below.
> 
> Thanks 
> Changchun
> 
> 
> > -----Original Message-----
> > From: Stephen Hemminger [mailto:stephen at networkplumber.org]
> > Sent: Tuesday, August 26, 2014 8:13 AM
> > To: Ouyang, Changchun
> > Cc: dev at dpdk.org
> > Subject: Re: [dpdk-dev] [PATCH 4/5] virtio: New API to enable/disable
> > multicast and promisc mode
> > 
> > On Mon, 25 Aug 2014 10:09:31 +0800
> > Ouyang Changchun <changchun.ouyang at intel.com> wrote:
> > 
> > > This patch adds new API in virtio for supporting promiscuous and
> > allmulticast enabling and disabling.
> > >
> > > Signed-off-by: Changchun Ouyang <changchun.ouyang at intel.com>
> > > Acked-by: Huawei Xie <huawei.xie at intel.com>
> > > Acked-by: Cunming Liang <cunming.liang at intel.com>
> > >
> > > ---
> > >  lib/librte_pmd_virtio/virtio_ethdev.c | 98
> > > ++++++++++++++++++++++++++++++++++-
> > >  1 file changed, 97 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/lib/librte_pmd_virtio/virtio_ethdev.c
> > > b/lib/librte_pmd_virtio/virtio_ethdev.c
> > > index 6293ac6..c7f874a 100644
> > > --- a/lib/librte_pmd_virtio/virtio_ethdev.c
> > > +++ b/lib/librte_pmd_virtio/virtio_ethdev.c
> > > @@ -66,6 +66,10 @@ static int eth_virtio_dev_init(struct eth_driver
> > > *eth_drv,  static int  virtio_dev_configure(struct rte_eth_dev *dev);
> > > static int  virtio_dev_start(struct rte_eth_dev *dev);  static void
> > > virtio_dev_stop(struct rte_eth_dev *dev);
> > > +static void virtio_dev_promiscuous_enable(struct rte_eth_dev *dev);
> > > +static void virtio_dev_promiscuous_disable(struct rte_eth_dev *dev);
> > > +static void virtio_dev_allmulticast_enable(struct rte_eth_dev *dev);
> > > +static void virtio_dev_allmulticast_disable(struct rte_eth_dev *dev);
> > >  static void virtio_dev_info_get(struct rte_eth_dev *dev,
> > >  				struct rte_eth_dev_info *dev_info);  static
> > int
> > > virtio_dev_link_update(struct rte_eth_dev *dev, @@ -403,6 +407,94 @@
> > > virtio_dev_close(struct rte_eth_dev *dev)
> > >  	virtio_dev_stop(dev);
> > >  }
> > >
> > > +static void
> > > +virtio_dev_promiscuous_enable(struct rte_eth_dev *dev) {
> > > +	struct virtio_hw *hw
> > > +		= VIRTIO_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> > > +	struct virtio_pmd_ctrl ctrl;
> > > +	int dlen[1];
> > > +	int ret;
> > > +
> > > +	ctrl.hdr.class = VIRTIO_NET_CTRL_RX;
> > > +	ctrl.hdr.cmd = VIRTIO_NET_CTRL_RX_PROMISC;
> > > +	ctrl.data[0] = 1;
> > > +	dlen[0] = 1;
> > > +
> > > +	ret = virtio_send_command(hw->cvq, &ctrl, dlen, 1);
> > > +
> > > +	if (ret) {
> > > +		PMD_INIT_LOG(ERR, "Promisc enabling but send command "
> > > +			  "failed, this is too late now...\n");
> > > +	}
> > > +}
> > > +
> > > +static void
> > > +virtio_dev_promiscuous_disable(struct rte_eth_dev *dev) {
> > > +	struct virtio_hw *hw
> > > +		= VIRTIO_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> > > +	struct virtio_pmd_ctrl ctrl;
> > > +	int dlen[1];
> > > +	int ret;
> > > +
> > > +	ctrl.hdr.class = VIRTIO_NET_CTRL_RX;
> > > +	ctrl.hdr.cmd = VIRTIO_NET_CTRL_RX_PROMISC;
> > > +	ctrl.data[0] = 0;
> > > +	dlen[0] = 1;
> > > +
> > > +	ret = virtio_send_command(hw->cvq, &ctrl, dlen, 1);
> > > +
> > > +	if (ret) {
> > > +		PMD_INIT_LOG(ERR, "Promisc disabling but send command "
> > > +			  "failed, this is too late now...\n");
> > > +	}
> > > +}
> > > +
> > > +static void
> > > +virtio_dev_allmulticast_enable(struct rte_eth_dev *dev) {
> > > +	struct virtio_hw *hw
> > > +		= VIRTIO_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> > > +	struct virtio_pmd_ctrl ctrl;
> > > +	int dlen[1];
> > > +	int ret;
> > > +
> > > +	ctrl.hdr.class = VIRTIO_NET_CTRL_RX;
> > > +	ctrl.hdr.cmd = VIRTIO_NET_CTRL_RX_ALLMULTI;
> > > +	ctrl.data[0] = 1;
> > > +	dlen[0] = 1;
> > > +
> > > +	ret = virtio_send_command(hw->cvq, &ctrl, dlen, 1);
> > > +
> > > +	if (ret) {
> > > +		PMD_INIT_LOG(ERR, "Promisc enabling but send command "
> > > +			  "failed, this is too late now...\n");
> > > +	}
> > > +}
> > > +
> > > +static void
> > > +virtio_dev_allmulticast_disable(struct rte_eth_dev *dev) {
> > > +	struct virtio_hw *hw
> > > +		= VIRTIO_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> > > +	struct virtio_pmd_ctrl ctrl;
> > > +	int dlen[1];
> > > +	int ret;
> > > +
> > > +	ctrl.hdr.class = VIRTIO_NET_CTRL_RX;
> > > +	ctrl.hdr.cmd = VIRTIO_NET_CTRL_RX_ALLMULTI;
> > > +	ctrl.data[0] = 0;
> > > +	dlen[0] = 1;
> > > +
> > > +	ret = virtio_send_command(hw->cvq, &ctrl, dlen, 1);
> > > +
> > > +	if (ret) {
> > > +		PMD_INIT_LOG(ERR, "Promisc disabling but send command "
> > > +			  "failed, this is too late now...\n");
> > > +	}
> > > +}
> > > +
> > >  /*
> > >   * dev_ops for virtio, bare necessities for basic operation
> > >   */
> > > @@ -411,6 +503,10 @@ static struct eth_dev_ops virtio_eth_dev_ops = {
> > >  	.dev_start               = virtio_dev_start,
> > >  	.dev_stop                = virtio_dev_stop,
> > >  	.dev_close               = virtio_dev_close,
> > > +	.promiscuous_enable      = virtio_dev_promiscuous_enable,
> > > +	.promiscuous_disable     = virtio_dev_promiscuous_disable,
> > > +	.allmulticast_enable     = virtio_dev_allmulticast_enable,
> > > +	.allmulticast_disable    = virtio_dev_allmulticast_disable,
> > >
> > >  	.dev_infos_get           = virtio_dev_info_get,
> > >  	.stats_get               = virtio_dev_stats_get,
> > > @@ -561,7 +657,7 @@ virtio_negotiate_features(struct virtio_hw *hw)  {
> > >  	uint32_t host_features, mask;
> > >
> > > -	mask = VIRTIO_NET_F_CTRL_RX | VIRTIO_NET_F_CTRL_VLAN;
> > > +	mask = VIRTIO_NET_F_CTRL_VLAN;
> > >  	mask |= VIRTIO_NET_F_CSUM | VIRTIO_NET_F_GUEST_CSUM;
> > >
> > >  	/* TSO and LRO are only available when their corresponding
> > 
> > I have similar patches, but you really need to fix the driver so that control
> > queue is brought up on dev_init, not start.
> > It makes sense to allow code to change modes independent of whether
> > driver has been started or not.
> > 
> > Also, the virtio driver is doing reset on stop. This may not be best solution
> > because it conflicts with what Linux driver is doing.
> > 
> Yes, agree with you on these 2 existing issues, but I'd like to use a separate patch to fix them,
> And let this patch focus on multicast feature.
> 
> If you have already a patch to fix them, that's great.
> 
> > Another current bug is that virtio DPDK driver is broken on latest KVM. It
> > works with Debian stable, but not with Debian testing.
> > Too busy to investigate further.
> 
> Is this bug introduced by this patch or it is an existing bug?
> If it is introduced by this patch, a v2 patch is necessary,
> Otherwise, a separate patch is suggested.

It is an existing bug (in KVM). Not getting warm response from upstream.


More information about the dev mailing list