[dpdk-dev] [PATCH 2/3] ixgbe: Rename field name for queue start in ixgbe PMD

Ouyang Changchun changchun.ouyang at intel.com
Tue Jul 22 09:47:31 CEST 2014


According to field name change in struct rte_eth_rxconf, update field name from
start_rx_per_q to rx_enable_queue in struct igb_rx_queue in ixgbe PMD, do same thing for TX.

Signed-off-by: Ouyang Changchun <changchun.ouyang at intel.com>
---
 lib/librte_pmd_ixgbe/ixgbe_rxtx.c | 8 ++++----
 lib/librte_pmd_ixgbe/ixgbe_rxtx.h | 4 ++--
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
index dfc2076..2872fad 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
@@ -1846,7 +1846,7 @@ ixgbe_dev_tx_queue_setup(struct rte_eth_dev *dev,
 	txq->port_id = dev->data->port_id;
 	txq->txq_flags = tx_conf->txq_flags;
 	txq->ops = &def_txq_ops;
-	txq->start_tx_per_q = tx_conf->start_tx_per_q;
+	txq->tx_enable_queue = tx_conf->tx_enable_queue;
 
 	/*
 	 * Modification to set VFTDT for virtual function if vf is detected
@@ -2091,7 +2091,7 @@ ixgbe_dev_rx_queue_setup(struct rte_eth_dev *dev,
 	rxq->crc_len = (uint8_t) ((dev->data->dev_conf.rxmode.hw_strip_crc) ?
 							0 : ETHER_CRC_LEN);
 	rxq->drop_en = rx_conf->rx_drop_en;
-	rxq->start_rx_per_q = rx_conf->start_rx_per_q;
+	rxq->rx_enable_queue = rx_conf->rx_enable_queue;
 
 	/*
 	 * Allocate RX ring hardware descriptors. A memzone large enough to
@@ -3652,13 +3652,13 @@ ixgbe_dev_rxtx_start(struct rte_eth_dev *dev)
 
 	for (i = 0; i < dev->data->nb_tx_queues; i++) {
 		txq = dev->data->tx_queues[i];
-		if (!txq->start_tx_per_q)
+		if (!txq->tx_enable_queue)
 			ixgbe_dev_tx_queue_start(dev, i);
 	}
 
 	for (i = 0; i < dev->data->nb_rx_queues; i++) {
 		rxq = dev->data->rx_queues[i];
-		if (!rxq->start_rx_per_q)
+		if (!rxq->rx_enable_queue)
 			ixgbe_dev_rx_queue_start(dev, i);
 	}
 
diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.h b/lib/librte_pmd_ixgbe/ixgbe_rxtx.h
index 64c0695..d6d856e 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.h
+++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.h
@@ -135,7 +135,7 @@ struct igb_rx_queue {
 	uint8_t             port_id;  /**< Device port identifier. */
 	uint8_t             crc_len;  /**< 0 if CRC stripped, 4 otherwise. */
 	uint8_t             drop_en;  /**< If not 0, set SRRCTL.Drop_En. */
-	uint8_t             start_rx_per_q;
+	uint8_t             rx_enable_queue;
 #ifdef RTE_LIBRTE_IXGBE_RX_ALLOW_BULK_ALLOC
 	/** need to alloc dummy mbuf, for wraparound when scanning hw ring */
 	struct rte_mbuf fake_mbuf;
@@ -200,7 +200,7 @@ struct igb_tx_queue {
 	/** Hardware context0 history. */
 	struct ixgbe_advctx_info ctx_cache[IXGBE_CTX_NUM];
 	struct ixgbe_txq_ops *ops;          /**< txq ops */
-	uint8_t             start_tx_per_q;
+	uint8_t             tx_enable_queue;
 };
 
 struct ixgbe_txq_ops {
-- 
1.8.4.2



More information about the dev mailing list