[dpdk-dev] [PATCH v4 01/21] i40e: set up and initialize flow director

Jingjing Wu jingjing.wu at intel.com
Wed Oct 22 03:01:07 CEST 2014


set up fortville resources to support flow director, includes
 - queue 0 pair allocated and set up for flow director
 - create vsi
 - reserve memzone for flow director programming packet

Signed-off-by: Jingjing Wu <jingjing.wu at intel.com>
---
 lib/librte_pmd_i40e/Makefile      |   2 +
 lib/librte_pmd_i40e/i40e_ethdev.c |  79 +++++++++++---
 lib/librte_pmd_i40e/i40e_ethdev.h |  30 +++++-
 lib/librte_pmd_i40e/i40e_fdir.c   | 222 ++++++++++++++++++++++++++++++++++++++
 lib/librte_pmd_i40e/i40e_rxtx.c   | 127 ++++++++++++++++++++++
 5 files changed, 447 insertions(+), 13 deletions(-)
 create mode 100644 lib/librte_pmd_i40e/i40e_fdir.c

diff --git a/lib/librte_pmd_i40e/Makefile b/lib/librte_pmd_i40e/Makefile
index bd3428f..98e4bdf 100644
--- a/lib/librte_pmd_i40e/Makefile
+++ b/lib/librte_pmd_i40e/Makefile
@@ -91,6 +91,8 @@ SRCS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += i40e_ethdev.c
 SRCS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += i40e_rxtx.c
 SRCS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += i40e_ethdev_vf.c
 SRCS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += i40e_pf.c
+SRCS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += i40e_fdir.c
+
 # this lib depends upon:
 DEPDIRS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += lib/librte_eal lib/librte_ether
 DEPDIRS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += lib/librte_mempool lib/librte_mbuf
diff --git a/lib/librte_pmd_i40e/i40e_ethdev.c b/lib/librte_pmd_i40e/i40e_ethdev.c
index 3b75f0f..838dd1e 100644
--- a/lib/librte_pmd_i40e/i40e_ethdev.c
+++ b/lib/librte_pmd_i40e/i40e_ethdev.c
@@ -765,6 +765,12 @@ i40e_dev_start(struct rte_eth_dev *dev)
 	i40e_vsi_queues_bind_intr(vsi);
 	i40e_vsi_enable_queues_intr(vsi);
 
+	/* enable FDIR MSIX interrupt */
+	if (pf->flags & I40E_FLAG_FDIR) {
+		i40e_vsi_queues_bind_intr(pf->fdir.fdir_vsi);
+		i40e_vsi_enable_queues_intr(pf->fdir.fdir_vsi);
+	}
+
 	/* Enable all queues which have been configured */
 	ret = i40e_vsi_switch_queues(vsi, TRUE);
 	if (ret != I40E_SUCCESS) {
@@ -2602,16 +2608,30 @@ i40e_vsi_setup(struct i40e_pf *pf,
 	case I40E_VSI_SRIOV :
 		vsi->nb_qps = pf->vf_nb_qps;
 		break;
+	case I40E_VSI_FDIR:
+		vsi->nb_qps = pf->fdir_nb_qps;
+		break;
 	default:
 		goto fail_mem;
 	}
-	ret = i40e_res_pool_alloc(&pf->qp_pool, vsi->nb_qps);
-	if (ret < 0) {
-		PMD_DRV_LOG(ERR, "VSI %d allocate queue failed %d",
-				vsi->seid, ret);
-		goto fail_mem;
-	}
-	vsi->base_queue = ret;
+	/*
+	 * The filter status descriptor is reported in rx queue 0,
+	 * while the tx queue for fdir filter programming has no
+	 * such constraints, can be non-zero queues.
+	 * To simplify it, choose FDIR vsi use queue 0 pair.
+	 * To make sure it will use queue 0 pair, queue allocation
+	 * need be done before this function is called
+	 */
+	if (type != I40E_VSI_FDIR) {
+		ret = i40e_res_pool_alloc(&pf->qp_pool, vsi->nb_qps);
+			if (ret < 0) {
+				PMD_DRV_LOG(ERR, "VSI %d allocate queue failed %d",
+						vsi->seid, ret);
+				goto fail_mem;
+			}
+			vsi->base_queue = ret;
+	} else
+		vsi->base_queue = I40E_FDIR_QUEUE_ID;
 
 	/* VF has MSIX interrupt in VF range, don't allocate here */
 	if (type != I40E_VSI_SRIOV) {
@@ -2743,9 +2763,25 @@ i40e_vsi_setup(struct i40e_pf *pf,
 		 * Since VSI is not created yet, only configure parameter,
 		 * will add vsi below.
 		 */
-	}
-	else {
-		PMD_DRV_LOG(ERR, "VSI: Not support other type VSI yet");
+	} else if (type == I40E_VSI_FDIR) {
+		vsi->uplink_seid = uplink_vsi->uplink_seid;
+		ctxt.pf_num = hw->pf_id;
+		ctxt.vf_num = 0;
+		ctxt.uplink_seid = vsi->uplink_seid;
+		ctxt.connection_type = 0x1;     /* regular data port */
+		ctxt.flags = I40E_AQ_VSI_TYPE_PF;
+		ret = i40e_vsi_config_tc_queue_mapping(vsi, &ctxt.info,
+						I40E_DEFAULT_TCMAP);
+		if (ret != I40E_SUCCESS) {
+			PMD_DRV_LOG(ERR, "Failed to configure "
+					"TC queue mapping\n");
+			goto fail_msix_alloc;
+		}
+		ctxt.info.up_enable_bits = I40E_DEFAULT_TCMAP;
+		ctxt.info.valid_sections |=
+			rte_cpu_to_le_16(I40E_AQ_VSI_PROP_SCHED_VALID);
+	} else {
+		PMD_DRV_LOG(ERR, "VSI: Not support other type VSI yet\n");
 		goto fail_msix_alloc;
 	}
 
@@ -2930,8 +2966,16 @@ i40e_pf_setup(struct i40e_pf *pf)
 		PMD_DRV_LOG(ERR, "Could not get switch config, err %d", ret);
 		return ret;
 	}
-
-	/* VSI setup */
+	if (pf->flags & I40E_FLAG_FDIR) {
+		/* make queue allocated first, let FDIR use queue pair 0*/
+		ret = i40e_res_pool_alloc(&pf->qp_pool, I40E_DEFAULT_QP_NUM_FDIR);
+		if (ret != I40E_FDIR_QUEUE_ID) {
+			PMD_DRV_LOG(ERR, "queue allocation fails for FDIR :"
+				    " ret =%d", ret);
+			pf->flags &= ~I40E_FLAG_FDIR;
+		}
+	}
+	/*  main VSI setup */
 	vsi = i40e_vsi_setup(pf, I40E_VSI_MAIN, NULL, 0);
 	if (!vsi) {
 		PMD_DRV_LOG(ERR, "Setup of main vsi failed");
@@ -2941,9 +2985,20 @@ i40e_pf_setup(struct i40e_pf *pf)
 	dev_data->nb_rx_queues = vsi->nb_qps;
 	dev_data->nb_tx_queues = vsi->nb_qps;
 
+	/* setup FDIR after main vsi created.*/
+	if (pf->flags & I40E_FLAG_FDIR) {
+		ret = i40e_fdir_setup(pf);
+		if (ret != I40E_SUCCESS) {
+			PMD_DRV_LOG(ERR, "Failed to setup flow director\n");
+			pf->flags &= ~I40E_FLAG_FDIR;
+		}
+	}
+
 	/* Configure filter control */
 	memset(&settings, 0, sizeof(settings));
 	settings.hash_lut_size = I40E_HASH_LUT_SIZE_128;
+	if (pf->flags & I40E_FLAG_FDIR)
+		settings.enable_fdir = TRUE;
 	/* Enable ethtype and macvlan filters */
 	settings.enable_ethtype = TRUE;
 	settings.enable_macvlan = TRUE;
diff --git a/lib/librte_pmd_i40e/i40e_ethdev.h b/lib/librte_pmd_i40e/i40e_ethdev.h
index 1d42cd2..327388b 100644
--- a/lib/librte_pmd_i40e/i40e_ethdev.h
+++ b/lib/librte_pmd_i40e/i40e_ethdev.h
@@ -46,11 +46,12 @@
 /* number of VSIs and queue default setting */
 #define I40E_MAX_QP_NUM_PER_VF    16
 #define I40E_DEFAULT_QP_NUM_VMDQ  64
-#define I40E_DEFAULT_QP_NUM_FDIR  64
+#define I40E_DEFAULT_QP_NUM_FDIR  1
 #define I40E_UINT32_BIT_SIZE      (CHAR_BIT * sizeof(uint32_t))
 #define I40E_VFTA_SIZE            (4096 / I40E_UINT32_BIT_SIZE)
 /* Default TC traffic in case DCB is not enabled */
 #define I40E_DEFAULT_TCMAP        0x1
+#define I40E_FDIR_QUEUE_ID        0
 
 /* i40e flags */
 #define I40E_FLAG_RSS                   (1ULL << 0)
@@ -219,6 +220,27 @@ struct i40e_pf_vf {
 };
 
 /*
+ *  A structure used to define fields of a FDIR related info.
+ */
+struct i40e_fdir_info {
+	struct i40e_vsi *fdir_vsi;     /* pointer to fdir VSI structure */
+	uint16_t match_counter_index;  /* Statistic counter index used for fdir*/
+	struct i40e_tx_queue *txq;
+	struct i40e_rx_queue *rxq;
+	void *prg_pkt;                 /* memory for fdir program packet */
+	uint64_t dma_addr;             /* physic address of packet memory*/
+	/*
+	 * the rule how bytes stream is extracted as flexible payload
+	 * for each payload layer, the setting can up to three elements
+	 */
+	struct {
+		uint8_t offset;        /* offset in words from the beginning of payload */
+		uint8_t size;          /* size in words */
+	} flex_set[3][3];
+
+};
+
+/*
  * Structure to store private data specific for PF instance.
  */
 struct i40e_pf {
@@ -246,6 +268,7 @@ struct i40e_pf {
 	uint16_t vmdq_nb_qps; /* The number of queue pairs of VMDq */
 	uint16_t vf_nb_qps; /* The number of queue pairs of VF */
 	uint16_t fdir_nb_qps; /* The number of queue pairs of Flow Director */
+	struct i40e_fdir_info fdir; /* flow director info */
 };
 
 enum pending_msg {
@@ -346,6 +369,11 @@ int i40e_vsi_vlan_pvid_set(struct i40e_vsi *vsi,
 int i40e_vsi_config_vlan_stripping(struct i40e_vsi *vsi, bool on);
 uint64_t i40e_config_hena(uint64_t flags);
 uint64_t i40e_parse_hena(uint64_t flags);
+enum i40e_status_code i40e_fdir_setup_tx_resources(struct i40e_pf *pf,
+				    unsigned int socket_id);
+enum i40e_status_code i40e_fdir_setup_rx_resources(struct i40e_pf *pf,
+				    unsigned int socket_id);
+int i40e_fdir_setup(struct i40e_pf *pf);
 
 /* I40E_DEV_PRIVATE_TO */
 #define I40E_DEV_PRIVATE_TO_PF(adapter) \
diff --git a/lib/librte_pmd_i40e/i40e_fdir.c b/lib/librte_pmd_i40e/i40e_fdir.c
new file mode 100644
index 0000000..a44bb73
--- /dev/null
+++ b/lib/librte_pmd_i40e/i40e_fdir.c
@@ -0,0 +1,222 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/queue.h>
+#include <stdio.h>
+#include <errno.h>
+#include <stdint.h>
+#include <string.h>
+#include <unistd.h>
+#include <stdarg.h>
+
+#include <rte_ether.h>
+#include <rte_ethdev.h>
+#include <rte_log.h>
+#include <rte_memzone.h>
+#include <rte_malloc.h>
+
+#include "i40e_logs.h"
+#include "i40e/i40e_type.h"
+#include "i40e_ethdev.h"
+#include "i40e_rxtx.h"
+
+#define I40E_FDIR_MZ_NAME          "FDIR_MEMZONE"
+#define I40E_FDIR_PKT_LEN                   512
+
+#define I40E_COUNTER_PF           2
+/* Statistic counter index for one pf */
+#define I40E_COUNTER_INDEX_FDIR(pf_id)   (0 + (pf_id) * I40E_COUNTER_PF)
+#define I40E_FLX_OFFSET_IN_FIELD_VECTOR   50
+
+static int i40e_fdir_rx_queue_init(struct i40e_rx_queue *rxq);
+
+static int
+i40e_fdir_rx_queue_init(struct i40e_rx_queue *rxq)
+{
+	struct i40e_hw *hw = I40E_VSI_TO_HW(rxq->vsi);
+	struct i40e_hmc_obj_rxq rx_ctx;
+	int err = I40E_SUCCESS;
+
+	memset(&rx_ctx, 0, sizeof(struct i40e_hmc_obj_rxq));
+	/* Init the RX queue in hardware */
+	rx_ctx.dbuff = I40E_RXBUF_SZ_1024 >> I40E_RXQ_CTX_DBUFF_SHIFT;
+	rx_ctx.hbuff = 0;
+	rx_ctx.base = rxq->rx_ring_phys_addr / I40E_QUEUE_BASE_ADDR_UNIT;
+	rx_ctx.qlen = rxq->nb_rx_desc;
+#ifndef RTE_LIBRTE_I40E_16BYTE_RX_DESC
+	rx_ctx.dsize = 1;
+#endif
+	rx_ctx.dtype = i40e_header_split_none;
+	rx_ctx.hsplit_0 = I40E_HEADER_SPLIT_NONE;
+	rx_ctx.rxmax = ETHER_MAX_LEN;
+	rx_ctx.tphrdesc_ena = 1;
+	rx_ctx.tphwdesc_ena = 1;
+	rx_ctx.tphdata_ena = 1;
+	rx_ctx.tphhead_ena = 1;
+	rx_ctx.lrxqthresh = 2;
+	rx_ctx.crcstrip = 0;
+	rx_ctx.l2tsel = 1;
+	rx_ctx.showiv = 1;
+	rx_ctx.prefena = 1;
+
+	err = i40e_clear_lan_rx_queue_context(hw, rxq->reg_idx);
+	if (err != I40E_SUCCESS) {
+		PMD_DRV_LOG(ERR, "Failed to clear FDIR RX queue context.");
+		return err;
+	}
+	err = i40e_set_lan_rx_queue_context(hw, rxq->reg_idx, &rx_ctx);
+	if (err != I40E_SUCCESS) {
+		PMD_DRV_LOG(ERR, "Failed to set FDIR RX queue context.");
+		return err;
+	}
+	rxq->qrx_tail = hw->hw_addr +
+		I40E_QRX_TAIL(rxq->vsi->base_queue);
+
+	rte_wmb();
+	/* Init the RX tail regieter. */
+	I40E_PCI_REG_WRITE(rxq->qrx_tail, 0);
+	I40E_PCI_REG_WRITE(rxq->qrx_tail, rxq->nb_rx_desc - 1);
+
+	return err;
+}
+
+/*
+ * i40e_fdir_setup - reserve and initialize the Flow Director resources
+ * @pf: board private structure
+ */
+int
+i40e_fdir_setup(struct i40e_pf *pf)
+{
+	struct i40e_hw *hw = I40E_PF_TO_HW(pf);
+	struct i40e_vsi *vsi;
+	int err = I40E_SUCCESS;
+	char z_name[RTE_MEMZONE_NAMESIZE];
+	const struct rte_memzone *mz = NULL;
+	struct rte_eth_dev *eth_dev = pf->adapter->eth_dev;
+
+	PMD_DRV_LOG(INFO, "FDIR HW Capabilities: num_filters_guaranteed = %u,"
+			" num_filters_best_effort = %u.",
+			hw->func_caps.fd_filters_guaranteed,
+			hw->func_caps.fd_filters_best_effort);
+
+	vsi = pf->fdir.fdir_vsi;
+	if (vsi) {
+		PMD_DRV_LOG(ERR, "FDIR vsi pointer needs"
+				 "to be null before creation.");
+		return I40E_ERR_BAD_PTR;
+	}
+	/* make new FDIR VSI */
+	vsi = i40e_vsi_setup(pf, I40E_VSI_FDIR, pf->main_vsi, 0);
+	if (!vsi) {
+		PMD_DRV_LOG(ERR, "Couldn't create FDIR VSI.");
+		return I40E_ERR_NO_AVAILABLE_VSI;
+	}
+	pf->fdir.fdir_vsi = vsi;
+
+	/*Fdir tx queue setup*/
+	err = i40e_fdir_setup_tx_resources(pf, 0);
+	if (err) {
+		PMD_DRV_LOG(ERR, "Failed to setup FDIR TX resources.");
+		goto fail_setup_tx;
+	}
+
+	/*Fdir rx queue setup*/
+	err = i40e_fdir_setup_rx_resources(pf, 0);
+	if (err) {
+		PMD_DRV_LOG(ERR, "Failed to setup FDIR RX resources.");
+		goto fail_setup_rx;
+	}
+
+	err = i40e_tx_queue_init(pf->fdir.txq);
+	if (err) {
+		PMD_DRV_LOG(ERR, "Failed to do FDIR TX initialization.");
+		goto fail_mem;
+	}
+
+	/* need switch on before dev start*/
+	err = i40e_switch_tx_queue(hw, vsi->base_queue, TRUE);
+	if (err) {
+		PMD_DRV_LOG(ERR, "Failed to do fdir TX switch on.");
+		goto fail_mem;
+	}
+
+	/* Init the rx queue in hardware */
+	err = i40e_fdir_rx_queue_init(pf->fdir.rxq);
+	if (err) {
+		PMD_DRV_LOG(ERR, "Failed to do FDIR RX initialization.");
+		goto fail_mem;
+	}
+
+	/* switch on rx queue */
+	err = i40e_switch_rx_queue(hw, vsi->base_queue, TRUE);
+	if (err) {
+		PMD_DRV_LOG(ERR, "Failed to do FDIR RX switch on.");
+		goto fail_mem;
+	}
+
+	/* reserve memory for the fdir programming packet */
+	snprintf(z_name, sizeof(z_name), "%s_%s_%d",
+			eth_dev->driver->pci_drv.name,
+			I40E_FDIR_MZ_NAME,
+			eth_dev->data->port_id);
+	mz = rte_memzone_lookup(z_name);
+	if (!mz) {
+		mz = rte_memzone_reserve(z_name,
+				I40E_FDIR_PKT_LEN,
+				rte_socket_id(),
+				0);
+		if (!mz) {
+			PMD_DRV_LOG(ERR, "Cannot init memzone for"
+				"flow director program packet.");
+			err = I40E_ERR_NO_MEMORY;
+			goto fail_mem;
+		}
+	}
+	pf->fdir.prg_pkt = mz->addr;
+	pf->fdir.dma_addr = (uint64_t)mz->phys_addr;
+	pf->fdir.match_counter_index = I40E_COUNTER_INDEX_FDIR(hw->pf_id);
+	PMD_DRV_LOG(INFO, "FDIR setup successfully, with programming queue %u.",
+		    vsi->base_queue);
+	return I40E_SUCCESS;
+
+fail_mem:
+	i40e_dev_rx_queue_release(pf->fdir.rxq);
+	pf->fdir.rxq = NULL;
+fail_setup_rx:
+	i40e_dev_tx_queue_release(pf->fdir.txq);
+	pf->fdir.txq = NULL;
+fail_setup_tx:
+	i40e_vsi_release(vsi);
+	pf->fdir.fdir_vsi = NULL;
+	return err;
+}
\ No newline at end of file
diff --git a/lib/librte_pmd_i40e/i40e_rxtx.c b/lib/librte_pmd_i40e/i40e_rxtx.c
index 2b53677..1017e3f 100644
--- a/lib/librte_pmd_i40e/i40e_rxtx.c
+++ b/lib/librte_pmd_i40e/i40e_rxtx.c
@@ -2107,6 +2107,8 @@ i40e_tx_queue_init(struct i40e_tx_queue *txq)
 	tx_ctx.base = txq->tx_ring_phys_addr / I40E_QUEUE_BASE_ADDR_UNIT;
 	tx_ctx.qlen = txq->nb_tx_desc;
 	tx_ctx.rdylist = rte_le_to_cpu_16(vsi->info.qs_handle[0]);
+	if (vsi->type == I40E_VSI_FDIR)
+		tx_ctx.fd_ena = TRUE;
 
 	err = i40e_clear_lan_tx_queue_context(hw, pf_q);
 	if (err != I40E_SUCCESS) {
@@ -2323,3 +2325,128 @@ i40e_dev_clear_queues(struct rte_eth_dev *dev)
 		i40e_reset_rx_queue(dev->data->rx_queues[i]);
 	}
 }
+
+enum i40e_status_code
+i40e_fdir_setup_tx_resources(struct i40e_pf *pf,
+				    unsigned int socket_id)
+{
+	struct i40e_tx_queue *txq;
+	const struct rte_memzone *tz = NULL;
+	uint32_t ring_size;
+	struct rte_eth_dev *dev = pf->adapter->eth_dev;
+
+#define I40E_FDIR_NUM_TX_DESC  I40E_MIN_RING_DESC
+	if (!pf) {
+		PMD_DRV_LOG(ERR, "PF is not available");
+		return I40E_ERR_BAD_PTR;
+	}
+
+	/* Allocate the TX queue data structure. */
+	txq = rte_zmalloc_socket("i40e fdir tx queue",
+				  sizeof(struct i40e_tx_queue),
+				  CACHE_LINE_SIZE,
+				  socket_id);
+	if (!txq) {
+		PMD_DRV_LOG(ERR, "Failed to allocate memory for "
+					"tx queue structure\n");
+		return I40E_ERR_NO_MEMORY;
+	}
+
+	/* Allocate TX hardware ring descriptors. */
+	ring_size = sizeof(struct i40e_tx_desc) * I40E_FDIR_NUM_TX_DESC;
+	ring_size = RTE_ALIGN(ring_size, I40E_DMA_MEM_ALIGN);
+
+	tz = i40e_ring_dma_zone_reserve(dev,
+					"fdir_tx_ring",
+					I40E_FDIR_QUEUE_ID,
+					ring_size,
+					socket_id);
+	if (!tz) {
+		i40e_dev_tx_queue_release(txq);
+		PMD_DRV_LOG(ERR, "Failed to reserve DMA memory for TX\n");
+		return I40E_ERR_NO_MEMORY;
+	}
+
+	txq->nb_tx_desc = I40E_FDIR_NUM_TX_DESC;
+	txq->queue_id = I40E_FDIR_QUEUE_ID;
+	txq->reg_idx = pf->fdir.fdir_vsi->base_queue;
+	txq->vsi = pf->fdir.fdir_vsi;
+
+#ifdef RTE_LIBRTE_XEN_DOM0
+	txq->tx_ring_phys_addr = rte_mem_phy2mch(tz->memseg_id, tz->phys_addr);
+#else
+	txq->tx_ring_phys_addr = (uint64_t)tz->phys_addr;
+#endif
+	txq->tx_ring = (struct i40e_tx_desc *)tz->addr;
+	/*
+	 * don't need to allocate software ring and reset for the fdir
+	 * program queue just set the queue has been configured.
+	 */
+	txq->q_set = TRUE;
+	pf->fdir.txq = txq;
+
+	return I40E_SUCCESS;
+}
+
+enum i40e_status_code
+i40e_fdir_setup_rx_resources(struct i40e_pf *pf,
+				    unsigned int socket_id)
+{
+	struct i40e_rx_queue *rxq;
+	const struct rte_memzone *rz = NULL;
+	uint32_t ring_size;
+	struct rte_eth_dev *dev = pf->adapter->eth_dev;
+
+#define I40E_FDIR_NUM_RX_DESC  I40E_MIN_RING_DESC
+	if (!pf) {
+		PMD_DRV_LOG(ERR, "PF is not available");
+		return I40E_ERR_BAD_PTR;
+	}
+
+	/* Allocate the TX queue data structure. */
+	rxq = rte_zmalloc_socket("i40e fdir rx queue",
+				  sizeof(struct i40e_rx_queue),
+				  CACHE_LINE_SIZE,
+				  socket_id);
+	if (!rxq) {
+		PMD_DRV_LOG(ERR, "Failed to allocate memory for "
+					"rx queue structure\n");
+		return I40E_ERR_NO_MEMORY;
+	}
+
+	/* Allocate TX hardware ring descriptors. */
+	ring_size = sizeof(union i40e_rx_desc) * I40E_FDIR_NUM_RX_DESC;
+	ring_size = RTE_ALIGN(ring_size, I40E_DMA_MEM_ALIGN);
+
+	rz = i40e_ring_dma_zone_reserve(dev,
+					"fdir_rx_ring",
+					I40E_FDIR_QUEUE_ID,
+					ring_size,
+					socket_id);
+	if (!rz) {
+		i40e_dev_rx_queue_release(rxq);
+		PMD_DRV_LOG(ERR, "Failed to reserve DMA memory for RX\n");
+		return I40E_ERR_NO_MEMORY;
+	}
+
+	rxq->nb_rx_desc = I40E_FDIR_NUM_RX_DESC;
+	rxq->queue_id = I40E_FDIR_QUEUE_ID;
+	rxq->reg_idx = pf->fdir.fdir_vsi->base_queue;
+	rxq->vsi = pf->fdir.fdir_vsi;
+
+#ifdef RTE_LIBRTE_XEN_DOM0
+	rxq->rx_ring_phys_addr = rte_mem_phy2mch(rz->memseg_id, rz->phys_addr);
+#else
+	rxq->rx_ring_phys_addr = (uint64_t)rz->phys_addr;
+#endif
+	rxq->rx_ring = (union i40e_rx_desc *)rz->addr;
+
+	/*
+	 * Don't need to allocate software ring and reset for the fdir
+	 * rx queue, just set the queue has been configured.
+	 */
+	rxq->q_set = TRUE;
+	pf->fdir.rxq = rxq;
+
+	return I40E_SUCCESS;
+}
-- 
1.8.1.4



More information about the dev mailing list