[dpdk-dev] [PATCH v8 0/3]: Add LRO support to ixgbe PMD

[Zhang, Helin]

Vlad

OK. Thanks! We will try to see if a follow up patch set can be submitted soon.

Regards,
Helin

> -----Original Message-----
> From: Vlad Zolotarov [mailto:vladz at cloudius-systems.com]
> Sent: Wednesday, April 22, 2015 5:19 PM
> To: Zhang, Helin; dev at dpdk.org
> Cc: Ananyev, Konstantin
> Subject: Re: [dpdk-dev] [PATCH v8 0/3]: Add LRO support to ixgbe PMD
> 
> 
> 
> On 04/22/15 08:28, Zhang, Helin wrote:
> > Vlad, how about the new elements added? E.g. rx_vec_allowed was added in
> struct ixgbe_hw in ixgbe_type.h.
> 
> If memory (and sight) serves me well this wasn't in this series... I suggest we
> move to the relevant thread ("bug fixes in the ixgbe PF PMD Rx flow").
> In any case, both this and that series were already committed: this to
> 2.1 tree and the one with the issue u r referring - to 2.0. U are welcome to post
> a follow up series.
> 
> Moving them say to ixgbe_adapter would address the issue I guess. It would be
> nice if u could CC me when u send the series.
> 
> thanks,
> vlad
> >
> > Regards,
> > Helin
> >
> >> -----Original Message-----
> >> From: Vlad Zolotarov [mailto:vladz at cloudius-systems.com]
> >> Sent: Wednesday, April 22, 2015 12:59 PM
> >> To: Zhang, Helin; dev at dpdk.org
> >> Cc: Ananyev, Konstantin
> >> Subject: Re: [dpdk-dev] [PATCH v8 0/3]: Add LRO support to ixgbe PMD
> >>
> >>
> >>
> >> On 04/22/15 04:23, Zhang, Helin wrote:
> >>> Hi Vlad
> >>>
> >>> I have a concern about the code changes you added in ixgbe_type.h.
> >> Helin, v9 of this series has addressed exactly this "issue" all new
> >> macros have been moved to ixgbe_ethdev.h.
> >>
> >>> For ixgbe, all source files in librte_pmd_ixgbe/ixgbe, except
> >>> ixgbe_osdep.h
> >> were called as "base driver", which was not developed by DPDK
> >> developers, and released by the other team. We never modify any code
> >> in those base driver source files, and just copy those file into DPDK project.
> >>> We did everything in DPDK developed source files. As we depends on
> >>> that
> >> team to update future base driver for us, and we don't want to
> >> maintain any code changes in "base driver". So we need to think to
> >> move your code changes in ixgbe_type.h to other DPDK developed source
> files.
> >>> Though your code changes is good enough, but we may need to comply
> >>> with
> >> what we did before. This will save our maintaining efforts in the
> >> future. Also we have similar rules for e1000, i40e, fm10k. Thank you very
> much!
> >>> Regards,
> >>> Helin
> >>>
> >>>> -----Original Message-----
> >>>> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Vlad Zolotarov
> >>>> Sent: Thursday, March 19, 2015 1:52 AM
> >>>> To: dev at dpdk.org
> >>>> Subject: [dpdk-dev] [PATCH v8 0/3]: Add LRO support to ixgbe PMD
> >>>>
> >>>> This series adds the missing flow for enabling the LRO in the
> >>>> ethdev and adds a support for this feature in the ixgbe PMD. There
> >>>> is a big hope that this initiative is going to be picked up by some
> >>>> Intel developer that would add the LRO support to other Intel PMDs.
> >>>>
> >>>> The series starts with some cleanup work in the code the final
> >>>> patch (the actual adding of the LRO support) is going to
> touch/use/change.
> >>>> There are still quite a few issues in the ixgbe PMD code left but
> >>>> they have to be a matter of a different series and I've left a few "TODO"
> >>>> remarks in the code.
> >>>>
> >>>> The LRO ("RSC" in Intel's context) PMD completion handling code
> >>>> follows the same design as the corresponding Linux and FreeBSD
> >>>> implementation: pass the aggregation's cluster HEAD buffer to the
> >>>> NEXTP entry of the software ring till EOP is met.
> >>>>
> >>>> HW configuration follows the corresponding specs: this feature is
> >>>> supported only by x540 and
> >>>> 82599 PF devices.
> >>>>
> >>>> The feature has been tested with seastar TCP stack with the
> >>>> following configuration on Tx side:
> >>>>      - MTU: 400B
> >>>>      - 100 concurrent TCP connections.
> >>>>
> >>>> The results were:
> >>>>      - Without LRO: total throughput: 0.12Gbps, coefficient of variance:
> >> 1.41%
> >>>>      - With LRO:    total throughput: 8.21Gbps, coefficient of
> variance:
> >> 0.59%
> >>>> This is an almost factor 80 improvement.
> >>>>
> >>>> New in v8:
> >>>>      - Fixed the structs naming: igb_xxx -> ixgbe_xxx (some
> >>>> leftovers in
> >> PATCH2).
> >>>>      - Took the RSC configuration code from ixgbe_dev_rx_init()
> >>>> into a
> >> separate
> >>>>        function - ixgbe_set_rsc().
> >>>>      - Added some missing macros for HW configuration.
> >>>>      - Styling adjustments:
> >>>>         - Functions names.
> >>>>         - Functions descriptions.
> >>>>      - Reworked the ixgbe_free_rsc_cluster() code to make it more
> >> readable.
> >>>>      - Kill the HEADER_SPLIT flow in ixgbe_set_rsc() since it's not
> >>>> supported
> >> by
> >>>>        ixgbe PMD.
> >>>>
> >>>> New in v7:
> >>>>      - Free not-yet-completed RSC aggregations in rte_eth_dev_stop()
> flow.
> >>>>      - Fixed rx_bulk_alloc_allowed and rx_vec_allowed initialization:
> >>>>         - Don't set them to FALSE in rte_eth_dev_stop() flow - the
> following
> >>>>           rte_eth_dev_start() will need them.
> >>>>         - Reset them to TRUE in rte_eth_dev_configure() and not in
> >>>> a
> >>>> probe() flow.
> >>>>           This will ensure the proper behaviour if port is re-configured.
> >>>>      - Reset the sw_ring[].mbuf entry in a bulk allocation case.
> >>>>        This is needed for ixgbe_rx_queue_release_mbufs().
> >>>>      - _recv_pkts_lro(): added the missing memory barrier before
> >>>> RDT update in a
> >>>>        non-bulk allocation case.
> >>>>      - Don't allow RSC when device is configured in an SR-IOV mode.
> >>>>
> >>>> New in v6:
> >>>>      - Fix of the typo in the "bug fixes" series that broke the
> >>>> compilation caused a
> >>>>        minor change in this follow-up series.
> >>>>
> >>>> New in v5:
> >>>>      - Split the series into "bug fixes" and "all the rest" so that
> >>>> the former could be
> >>>>        integrated into a 2.0 release.
> >>>>      - Put the RTE_ETHDEV_HAS_LRO_SUPPORT definition at the
> >>>> beginning of rte_ethdev.h.
> >>>>      - Removed the "TODO: Remove me" comment near
> >>>> RTE_ETHDEV_HAS_LRO_SUPPORT.
> >>>>
> >>>> New in v4:
> >>>>      - Remove CONFIG_RTE_ETHDEV_LRO_SUPPORT from
> >>>> config/common_linuxapp.
> >>>>      - Define RTE_ETHDEV_HAS_LRO_SUPPORT in rte_ethdev.h.
> >>>>      - As a result of "ixgbe: check rxd number to avoid mbuf leak"
> >>>> (352078e8e) Vector Rx
> >>>>        had to get the same treatment as Rx Bulk Alloc (see PATCH4
> >>>> for more details).
> >>>>
> >>>> New in v3:
> >>>>      - ixgbe_rx_alloc_bufs(): Always reset refcnt of the buffers to 1.
> >>>> Otherwise
> >>>> rte_pktmbuf_free()
> >>>>        won't free them.
> >>>>
> >>>> New in v2:
> >>>>      - Removed rte_eth_dev_data.lro_bulk_alloc and added
> >>>> ixgbe_hw.rx_bulk_alloc_allowed
> >>>>        instead.
> >>>>      - Unified the rx_pkt_bulk callback setting (a separate new patch).
> >>>>      - Fixed a few styling and spelling issues.
> >>>>
> >>>>
> >>>> Vlad Zolotarov (3):
> >>>>     ixgbe: Cleanups
> >>>>     ixgbe: Code refactoring
> >>>>     ixgbe: Add LRO support
> >>>>
> >>>>    lib/librte_ether/rte_ethdev.h           |   9 +-
> >>>>    lib/librte_net/rte_ip.h                 |   3 +
> >>>>    lib/librte_pmd_ixgbe/ixgbe/ixgbe_type.h |   6 +
> >>>>    lib/librte_pmd_ixgbe/ixgbe_ethdev.c     |  11 +
> >>>>    lib/librte_pmd_ixgbe/ixgbe_ethdev.h     |   5 +
> >>>>    lib/librte_pmd_ixgbe/ixgbe_rxtx.c       | 766
> >>>> +++++++++++++++++++++++++++++---
> >>>>    lib/librte_pmd_ixgbe/ixgbe_rxtx.h       |   6 +
> >>>>    7 files changed, 737 insertions(+), 69 deletions(-)
> >>>>
> >>>> --
> >>>> 2.1.0