[dpdk-dev] [PATCH]doc: Add performance tuning guide about how to get DPDK high perf on Intel platform.

Zhang, Helin helin.zhang at intel.com
Mon Aug 10 18:10:50 CEST 2015



> -----Original Message-----
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Thomas Monjalon
> Sent: Monday, August 10, 2015 6:38 AM
> To: Xu, Qian Q
> Cc: dev at dpdk.org
> Subject: Re: [dpdk-dev] [PATCH]doc: Add performance tuning guide about how
> to get DPDK high perf on Intel platform.
> 
> Hi,
> 
> Thanks for adding more helpful documentation.
> 
> 2015-08-10 14:34, Qian Xu:
> > Signed-off-by: Qian Xu <qian.q.xu at intel.com>
> 
> The Sign-off line must be below the commit message.
> 
> > Add a new guide doc under guides folder. This document is a
> > step-by-step guide about how to get high performance with DPDK on Intel's
> platform and NICs.
> > It is designed for users who are not familiar with DPDK but would like
> > to measure the best performance. It contains step-by-step instructions to set
> the platform and NICs to its best performance.
> > The document will add more sections with the DPDK features' increment.
> > Currently, the document has only one section about PF performance test setup,
> and will add below cases in near future.
> >
> > *  VF performance tuning.
> > *  Vhost/virtio performance tuning.
> > *  new features....
> 
> Good idea, thanks
> 
> > --- /dev/null
> > +++ b/doc/guides/perf_tuning_guide/img/pf_performance_test_setup.svg
> > +  <image
> > +     width="609.375"
> > +     height="349.6875"
> > +     preserveAspectRatio="none"
> > +     xlink:href="data:image/png;base64,
> 
> This is a PNG picture embedded in SVG.
> Please draw only some true SVG files.
> Inkscape is the preferred tool.
> 
> > +++ b/doc/guides/perf_tuning_guide/performance_tuning.rst
> 
> This file is Intel-specific. So it should be renamed
> 	doc/guides/perf_tuning/intel_platform.rst
Agree with this.

> 
> > +This document is a step-by-step guide for getting high DPDK performance
> with Intel's platform and NICs.
> 
> Could it be specific to Intel's CPU but allows some chapters for other NICs tuning
> (e.g. Chelsio, Cisco, Mellanox)?
> Ideally, the NIC tuning should refer to sections in doc/guides/nics/.
Yes, we want to have it as common as possible, and take Intel(r) NIC/Server as an example.

> 
> > +1. Get an high end Intel® NIC, e.g: Intel® XL710.
> 
> "Get an high end NIC that can sustain a high packet rate."?
Usually yes, talking about 1G is meaningless now, and 10G @ line rate is not so challenging
and complicated.
40G is more challenging, and complicated, so take it as an example.

> 
> > +2. Make sure each NIC has flashed the latest version of NVM/firmware, if
> there is.
> > +
> > +3. Use PCIe Gen3 slots, such as Gen3 x8 or Gen3 x16 because PCIe Gen2 slots
> can't provide enough bandwidth for 2x10G and above.
> 
> Could you describe how to get this characteristics with lspci?
> 
> > +4. When inserting NICs to the PCI slots, be careful about the NUMA. If you will
> use 2 or more ports from different NICs, please make sure these NICs on the
> same CPU socket.
> 
> Could you describe how to know the CPU-PCI mapping? lstopo, lspci?
Below there already have the descriptions.

> 
> > +BIOS settings:
> > +~~~~~~~~~~~~~~
> > +
> > +1. To be sure, reset all the BIOS settings to default.
> > +
> > +2. Disable all power saving options, and set all options for best performance.
> > +
> > +3. Disable Turbo to ensure the performance scaling with core numbers
> increment.
> > +
> > +4. Set memory frequency to the highest number, NOT auto.
> > +
> > +5. Disable all Virtualization options when you test physical function of NIC, and
> turn on VT-d if you wants to use VFIO.
> 
> Could you describe usage of dmidecode to check this, please?
> 
> > +1. Get an widely used 64 bits Linux distribution installed, e.g. Fedora 20 - 64
> bits.
> 
> Why not describe build options and run-time options to use with any Linux?
Actually there is nothing special for performance testing, comparing to running
DPDK basically.
No need to duplicate here, as all the setup requirements are described in GSG.

> 
> > +3. Make sure the widely used and fully validated version of kernel installed,
> e.g. 3.18.
> 
> Reference to release notes required.
Agree with this.

> 
> > +4. Make sure the required components are enabled for some old version of
> kernels, before rebuilding the kernel. The kernel may need to be rebuilt if any
> DPDK component is missing. Refer to Getting Started Guide on www.dpdk.org
> for more details.
> 
> Please use sphinx reference.
> 
> > +1. For Intel® 40G NICs, special configurations should be set before compiling it,
> as follows. **Note**: This is very important::
> > +
> > +      for at least DPDK release 1.8, 2.0 and 2.1, in
> <dpdk_folder>/config/common_linuxapp
> > +      CONFIG_RTE_PCI_CONFIG=y
> > +      CONFIG_RTE_PCI_EXTENDED_TAG=”on”
> 
> Please insert it in a i40e doc instead of here. Then you can reference it.
Good idea!

Regards,
Helin



More information about the dev mailing list