[dpdk-dev] [PATCH 1/6] ixgbe: Support VMDq RSS in non-SRIOV environment
Qiu, Michael
michael.qiu at intel.com
Mon Aug 24 12:41:53 CEST 2015
On 5/21/2015 3:50 PM, Ouyang Changchun wrote:
> In non-SRIOV environment, VMDq RSS could be enabled by MRQC register.
> In theory, the queue number per pool could be 2 or 4, but only 2 queues are
> available due to HW limitation, the same limit also exist in Linux ixgbe driver.
>
> Signed-off-by: Changchun Ouyang <changchun.ouyang at intel.com>
> ---
> lib/librte_ether/rte_ethdev.c | 40 +++++++++++++++++++
> lib/librte_pmd_ixgbe/ixgbe_rxtx.c | 82 +++++++++++++++++++++++++++++++++------
> 2 files changed, 111 insertions(+), 11 deletions(-)
>
> diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
> index 024fe8b..6535715 100644
> --- a/lib/librte_ether/rte_ethdev.c
> +++ b/lib/librte_ether/rte_ethdev.c
> @@ -933,6 +933,16 @@ rte_eth_dev_check_vf_rss_rxq_num(uint8_t port_id, uint16_t nb_rx_q)
> return 0;
> }
>
> +#define VMDQ_RSS_RX_QUEUE_NUM_MAX 4
> +
> +static int
> +rte_eth_dev_check_vmdq_rss_rxq_num(__rte_unused uint8_t port_id, uint16_t nb_rx_q)
> +{
> + if (nb_rx_q > VMDQ_RSS_RX_QUEUE_NUM_MAX)
> + return -EINVAL;
> + return 0;
> +}
> +
> static int
> rte_eth_dev_check_mq_mode(uint8_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
> const struct rte_eth_conf *dev_conf)
> @@ -1093,6 +1103,36 @@ rte_eth_dev_check_mq_mode(uint8_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
> return -EINVAL;
> }
> }
> +
> + if (dev_conf->rxmode.mq_mode == ETH_MQ_RX_VMDQ_RSS) {
> + uint32_t nb_queue_pools =
> + dev_conf->rx_adv_conf.vmdq_rx_conf.nb_queue_pools;
> + struct rte_eth_dev_info dev_info;
> +
> + rte_eth_dev_info_get(port_id, &dev_info);
> + dev->data->dev_conf.rxmode.mq_mode = ETH_MQ_RX_VMDQ_RSS;
> + if (nb_queue_pools == ETH_32_POOLS || nb_queue_pools == ETH_64_POOLS)
> + RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool =
> + dev_info.max_rx_queues/nb_queue_pools;
> + else {
> + PMD_DEBUG_TRACE("ethdev port_id=%d VMDQ "
> + "nb_queue_pools=%d invalid "
> + "in VMDQ RSS\n"
Does here miss "," ?
Thanks,
Michael
> + port_id,
> + nb_queue_pools);
> + return -EINVAL;
> + }
> +
> + if (rte_eth_dev_check_vmdq_rss_rxq_num(port_id,
> + RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool) != 0) {
> + PMD_DEBUG_TRACE("ethdev port_id=%d"
> + " SRIOV active, invalid queue"
> + " number for VMDQ RSS, allowed"
> + " value are 1, 2 or 4\n",
> + port_id);
> + return -EINVAL;
> + }
> + }
> }
> return 0;
> }
>
More information about the dev
mailing list