[dpdk-dev] [PATCH v2 3/3] examples/l3fwd: Handle SIGINT and SIGTERM in l3fwd
Zhihong Wang
zhihong.wang at intel.com
Fri Dec 25 03:37:12 CET 2015
Handle SIGINT and SIGTERM in l3fwd.
Signed-off-by: Zhihong Wang <zhihong.wang at intel.com>
---
examples/l3fwd/main.c | 110 +++++++++++++++++++++++++++++++++++++++++---------
1 file changed, 90 insertions(+), 20 deletions(-)
diff --git a/examples/l3fwd/main.c b/examples/l3fwd/main.c
index 5b0c2dd..b9f3232 100644
--- a/examples/l3fwd/main.c
+++ b/examples/l3fwd/main.c
@@ -41,6 +41,8 @@
#include <stdarg.h>
#include <errno.h>
#include <getopt.h>
+#include <signal.h>
+#include <unistd.h>
#include <rte_common.h>
#include <rte_vect.h>
@@ -75,6 +77,9 @@
#include <cmdline_parse.h>
#include <cmdline_parse_etheraddr.h>
+static int force_quit = -1;
+static int signo_quit = -1;
+
#define APP_LOOKUP_EXACT_MATCH 0
#define APP_LOOKUP_LPM 1
#define DO_RFC_1812_CHECKS
@@ -1554,6 +1559,8 @@ main_loop(__attribute__((unused)) void *dummy)
}
while (1) {
+ if (unlikely(force_quit != 0))
+ break;
cur_tsc = rte_rdtsc();
@@ -2559,6 +2566,74 @@ check_all_ports_link_status(uint8_t port_num, uint32_t port_mask)
}
}
+static void
+start_ports(void)
+{
+ unsigned portid, nb_ports;
+ int ret;
+
+ nb_ports = rte_eth_dev_count();
+ for (portid = 0; portid < nb_ports; portid++) {
+ if ((enabled_port_mask & (1 << portid)) == 0) {
+ continue;
+ }
+ printf("Starting port %d...", portid);
+ ret = rte_eth_dev_start(portid);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE,
+ "rte_eth_dev_start: err=%d, port=%d\n",
+ ret, portid);
+ /*
+ * If enabled, put device in promiscuous mode.
+ * This allows IO forwarding mode to forward packets
+ * to itself through 2 cross-connected ports of the
+ * target machine.
+ */
+ if (promiscuous_on)
+ rte_eth_promiscuous_enable(portid);
+ printf(" Done\n");
+ }
+}
+
+static void
+stop_ports(void)
+{
+ unsigned portid, nb_ports;
+
+ nb_ports = rte_eth_dev_count();
+ for (portid = 0; portid < nb_ports; portid++) {
+ if ((enabled_port_mask & (1 << portid)) == 0) {
+ continue;
+ }
+ printf("Stopping port %d...", portid);
+ rte_eth_dev_stop(portid);
+ rte_eth_dev_close(portid);
+ printf(" Done\n");
+ }
+}
+
+static void
+signal_handler(__rte_unused int signum)
+{
+ if (signum == SIGINT || signum == SIGTERM) {
+ printf("\nSignal %d received, preparing to exit...\n",
+ signum);
+ if (force_quit < 0) {
+ printf("Forwarding not started yet...\n");
+ /* stop ports */
+ stop_ports();
+ printf("Bye...\n");
+ /* inform if there's a caller */
+ signal(signum, SIG_DFL);
+ kill(getpid(), signum);
+ } else {
+ printf("Forwarding started already...\n");
+ signo_quit = signum;
+ force_quit = 1;
+ }
+ }
+}
+
int
main(int argc, char **argv)
{
@@ -2572,6 +2647,9 @@ main(int argc, char **argv)
uint32_t n_tx_queue, nb_lcores;
uint8_t portid, nb_rx_queue, queue, socketid;
+ signal(SIGINT, signal_handler);
+ signal(SIGTERM, signal_handler);
+
/* init EAL */
ret = rte_eal_init(argc, argv);
if (ret < 0)
@@ -2711,34 +2789,26 @@ main(int argc, char **argv)
printf("\n");
/* start ports */
- for (portid = 0; portid < nb_ports; portid++) {
- if ((enabled_port_mask & (1 << portid)) == 0) {
- continue;
- }
- /* Start device */
- ret = rte_eth_dev_start(portid);
- if (ret < 0)
- rte_exit(EXIT_FAILURE, "rte_eth_dev_start: err=%d, port=%d\n",
- ret, portid);
-
- /*
- * If enabled, put device in promiscuous mode.
- * This allows IO forwarding mode to forward packets
- * to itself through 2 cross-connected ports of the
- * target machine.
- */
- if (promiscuous_on)
- rte_eth_promiscuous_enable(portid);
- }
-
+ start_ports();
check_all_ports_link_status((uint8_t)nb_ports, enabled_port_mask);
/* launch per-lcore init on every lcore */
+ force_quit = 0;
rte_eal_mp_remote_launch(main_loop, NULL, CALL_MASTER);
RTE_LCORE_FOREACH_SLAVE(lcore_id) {
if (rte_eal_wait_lcore(lcore_id) < 0)
return -1;
}
+ printf("Stopping forwarding... Done\n");
+ /* stop ports */
+ stop_ports();
+ printf("Bye...\n");
+ /* inform if there's a caller */
+ if (force_quit != 0) {
+ signal(signo_quit, SIG_DFL);
+ kill(getpid(), signo_quit);
+ }
+
return 0;
}
--
2.5.0
More information about the dev
mailing list