[dpdk-dev] [PATCH v8 07/14] ethdev: Add functions that will be used by port hotplug functions

Tetsuya Mukawa mukawa at igel.co.jp
Mon Feb 16 05:14:26 CET 2015


The patch adds following functions.

- rte_eth_dev_save()
  The function is used for saving current rte_eth_dev structures.
- rte_eth_dev_get_changed_port()
  The function receives the rte_eth_dev structures, then compare
  these with current values to know which port is actually
  attached or detached.
- rte_eth_dev_get_addr_by_port()
  The function returns a pci address of an ethdev specified by port
  identifier.
- rte_eth_dev_get_port_by_addr()
  The function returns a port identifier of an ethdev specified by
  pci address.
- rte_eth_dev_get_name_by_port()
  The function returns a unique identifier name of an ethdev
  specified by port identifier.
- Add rte_eth_dev_check_detachable()
  The function returns whether a PMD supports detach function.

Also, the patch changes scope of rte_eth_dev_allocated() to global.
This function will be called by virtual PMDs to support port hotplug.
So change scope of the function to global.

v8:
- Add size parameter to rte_eth_dev_save().
- Add missing symbol in version map.
  (Thanks to Qiu, Michael and Iremonger, Bernard)
v7:
- Add pt_driver checking to rte_eth_dev_check_detachable().
  (Thanks to Qiu, Michael)
v5:
- Fix return value of below functions.
  rte_eth_dev_get_changed_port().
  rte_eth_dev_get_port_by_addr().
v4:
- Add parameter checking.
v3:
- Fix if-condition bug while comparing pci addresses.
- Add error checking codes.
Reported-by: Mark Enright <menrigh at brocade.com>

Signed-off-by: Tetsuya Mukawa <mukawa at igel.co.jp>
---
 lib/librte_ether/rte_ethdev.c          | 99 +++++++++++++++++++++++++++++++++-
 lib/librte_ether/rte_ethdev.h          | 83 ++++++++++++++++++++++++++++
 lib/librte_ether/rte_ether_version.map |  6 +++
 3 files changed, 187 insertions(+), 1 deletion(-)

diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 58d8072..3869a96 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -206,7 +206,7 @@ rte_eth_dev_data_alloc(void)
 				RTE_MAX_ETHPORTS * sizeof(*rte_eth_dev_data));
 }
 
-static struct rte_eth_dev *
+struct rte_eth_dev *
 rte_eth_dev_allocated(const char *name)
 {
 	unsigned i;
@@ -426,6 +426,103 @@ rte_eth_dev_count(void)
 	return (nb_ports);
 }
 
+int
+rte_eth_dev_save(struct rte_eth_dev *devs, size_t size)
+{
+	if ((devs == NULL) ||
+	    (size != sizeof(struct rte_eth_dev) * RTE_MAX_ETHPORTS))
+		return -EINVAL;
+
+	/* save current rte_eth_devices */
+	memcpy(devs, rte_eth_devices, size);
+	return 0;
+}
+
+int
+rte_eth_dev_get_changed_port(struct rte_eth_dev *devs, uint8_t *port_id)
+{
+	if ((devs == NULL) || (port_id == NULL))
+		return -EINVAL;
+
+	/* check which port was attached or detached */
+	for (*port_id = 0; *port_id < RTE_MAX_ETHPORTS; (*port_id)++, devs++) {
+		if (rte_eth_devices[*port_id].attached ^ devs->attached)
+			return 0;
+	}
+	return -ENODEV;
+}
+
+int
+rte_eth_dev_get_addr_by_port(uint8_t port_id, struct rte_pci_addr *addr)
+{
+	if (rte_eth_dev_validate_port(port_id, TRACE) == DEV_INVALID)
+		return -EINVAL;
+
+	if (addr == NULL) {
+		PMD_DEBUG_TRACE("Null pointer is specified\n");
+		return -EINVAL;
+	}
+
+	*addr = rte_eth_devices[port_id].pci_dev->addr;
+	return 0;
+}
+
+int
+rte_eth_dev_get_port_by_addr(struct rte_pci_addr *addr, uint8_t *port_id)
+{
+	struct rte_pci_addr *tmp;
+
+	if ((addr == NULL) || (port_id == NULL)) {
+		PMD_DEBUG_TRACE("Null pointer is specified\n");
+		return -EINVAL;
+	}
+
+	for (*port_id = 0; *port_id < RTE_MAX_ETHPORTS; (*port_id)++) {
+		if (!rte_eth_devices[*port_id].attached)
+			continue;
+		if (!rte_eth_devices[*port_id].pci_dev)
+			continue;
+		tmp = &rte_eth_devices[*port_id].pci_dev->addr;
+		if (eal_compare_pci_addr(tmp, addr) == 0)
+			return 0;
+	}
+	return -ENODEV;
+}
+
+int
+rte_eth_dev_get_name_by_port(uint8_t port_id, char *name)
+{
+	char *tmp;
+
+	if (rte_eth_dev_validate_port(port_id, TRACE) == DEV_INVALID)
+		return -EINVAL;
+
+	if (name == NULL) {
+		PMD_DEBUG_TRACE("Null pointer is specified\n");
+		return -EINVAL;
+	}
+
+	/* shouldn't check 'rte_eth_devices[i].data',
+	 * because it might be overwritten by VDEV PMD */
+	tmp = rte_eth_dev_data[port_id].name;
+	strncpy(name, tmp, strlen(tmp) + 1);
+	return 0;
+}
+
+int
+rte_eth_dev_check_detachable(uint8_t port_id)
+{
+	uint32_t drv_flags;
+
+	if (port_id >= RTE_MAX_ETHPORTS) {
+		PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+		return -EINVAL;
+	}
+
+	drv_flags = rte_eth_devices[port_id].driver->pci_drv.drv_flags;
+	return !(drv_flags & RTE_PCI_DRV_DETACHABLE);
+}
+
 static int
 rte_eth_dev_rx_queue_config(struct rte_eth_dev *dev, uint16_t nb_queues)
 {
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 91d9e86..6651890 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -1616,6 +1616,89 @@ extern struct rte_eth_dev rte_eth_devices[];
 extern uint8_t rte_eth_dev_count(void);
 
 /**
+ * Function for internal use by port hotplug functions.
+ * Copies current ethdev structures to the specified pointer.
+ *
+ * @param	devs	The pointer to the ethdev structures
+ * @param	size	The size of ethdev structures
+ * @return
+ *   - 0 on success, negative on error
+ */
+extern int rte_eth_dev_save(struct rte_eth_dev *devs, size_t size);
+
+/**
+ * Function for internal use by port hotplug functions.
+ * Compare the specified ethdev structures with currents. Then
+ * if there is a port which status is changed, fill the specified pointer
+ * with the port id of that port.
+ * @param	devs	The pointer to the ethdev structures
+ * @param	port_id	The pointer to the port id
+ * @return
+ *   - 0 on success, negative on error
+ */
+extern int rte_eth_dev_get_changed_port(
+		struct rte_eth_dev *devs, uint8_t *port_id);
+
+/**
+ * Function for internal use by port hotplug functions.
+ * Returns a pci address of a ethdev specified by port identifier.
+ * @param	port_id
+ *   The port identifier of the Ethernet device
+ * @param	addr
+ *   The pointer to the pci address
+ * @return
+ *   - 0 on success, negative on error
+ */
+extern int rte_eth_dev_get_addr_by_port(
+		uint8_t port_id, struct rte_pci_addr *addr);
+
+/**
+ * Function for internal use by port hotplug functions.
+ * Returns a port identifier of a ethdev specified by pci address.
+ * @param	addr
+ *   The pointer to the pci address of the Ethernet device.
+ * @param	port_id
+ *   The pointer to the port identifier
+ * @return
+ *   - 0 on success, negative on error
+ */
+extern int rte_eth_dev_get_port_by_addr(
+		struct rte_pci_addr *addr, uint8_t *port_id);
+
+/**
+ * Function for internal use by port hotplug functions.
+ * Returns a unique identifier name of a ethdev specified by port identifier.
+ * @param	port_id
+ *   The port identifier.
+ * @param	name
+ *  The pointer to the Unique identifier name for each Ethernet device
+ * @return
+ *   - 0 on success, negative on error
+ */
+extern int rte_eth_dev_get_name_by_port(uint8_t port_id, char *name);
+
+/**
+ * Function for internal use by port hotplug functions.
+ * Check whether or not, a PMD that is handling the ethdev specified by port
+ * identifier can support detach function.
+ * @param	port_id
+ *   The port identifier
+ * @return
+ *   - 0 on supporting detach function, negative on not supporting
+ */
+extern int rte_eth_dev_check_detachable(uint8_t port_id);
+
+/**
+ * Function for internal use by port hotplug functions.
+ * Returns a ethdev slot specified by the unique identifier name.
+ * @param	name
+ *  The pointer to the Unique identifier name for each Ethernet device
+ * @return
+ *   - The pointer to the ethdev slot, on success. NULL on error
+ */
+extern struct rte_eth_dev *rte_eth_dev_allocated(const char *name);
+
+/**
  * Function for internal use by dummy drivers primarily, e.g. ring-based
  * driver.
  * Allocates a new ethdev slot for an ethernet device and returns the pointer
diff --git a/lib/librte_ether/rte_ether_version.map b/lib/librte_ether/rte_ether_version.map
index 7316530..fc5dc27 100644
--- a/lib/librte_ether/rte_ether_version.map
+++ b/lib/librte_ether/rte_ether_version.map
@@ -109,6 +109,12 @@ DPDK_2.0 {
 	rte_eth_tx_queue_setup;
 	rte_eth_xstats_get;
 	rte_eth_xstats_reset;
+	rte_eth_dev_check_detachable;
+	rte_eth_dev_get_name_by_port;
+	rte_eth_dev_get_addr_by_port;
+	rte_eth_dev_get_port_by_addr;
+	rte_eth_dev_get_changed_port;
+	rte_eth_dev_save;
 
 	local: *;
 };
-- 
1.9.1



More information about the dev mailing list