[dpdk-dev] [PATCH v4 00/26] Single virtio implementation

Xie, Huawei huawei.xie at intel.com
Tue Feb 17 07:04:25 CET 2015


Acked-by Huawei Xie <huawei.xie at intel.com>

On 2/9/2015 9:14 AM, Ouyang, Changchun wrote:
> This is the patch set for single virtio implementation.
>  
> Why we need single virtio?
> ============================
> As we know currently there are at least 3 virtio PMD driver implementations:
> A) lib/librte_pmd_virtio(refer as virtio A);
> B) virtio_net_pmd by 6wind(refer as virtio B);
> C) virtio by Brocade/vyatta(refer as virtio C);
>  
> Integrating 3 implementations into one could reduce the maintaining cost and time,
> in other hand, user don't need practice their application on 3 variant one by one to see
> which one is the best for them;
>  
> What's the status?
> ====================
> Currently virtio A has covered most features of virtio B except for using port io to get pci resource,
> so there is a patch(17/22) to resolve it. But on the other hand there are a few differences between
> virtio A and virtio C, it needs integrate features/codes of virtio C into virtio A.
> This patch set bases on two original RFC patch sets from Stephen Hemminger[stephen at networkplumber.org]
> Refer to [http://dpdk.org/ml/archives/dev/2014-August/004845.html ] for the original one.
> This patch set also resolves some conflict with latest codes, removed duplicated codes, fix some
> issues in original codes.
>  
> What this patch set contains:
> ===============================
>   1) virtio: Rearrange resource initialization, it extracts a function to setup PCI resources;
>   2) virtio: Use weaker barriers, as DPDK driver only has to deal with the case of running on PCI
>      and with SMP, In this case, the code can use the weaker barriers instead of using hard (fence)
>      barriers. This may help performance a bit;
>   3) virtio: Allow starting with link down, other driver has similar behavior;
>   4) virtio: Add support for Link State interrupt;
>   5) ether: Add soft vlan encap/decap functions, it helps if HW don't support vlan strip;
>   6) virtio: Use software vlan stripping;
>   7) virtio: Remove unnecessary adapter structure;
>   8) virtio: Remove redundant vq_alignment, as vq alignment is always 4K, so use constant when needed;
>   9) virtio: Fix how states are handled during initialization, this is to match Linux kernel;
>   10) virtio: Make vtpci_get_status a local function as it is used in one file;
>   11) virtio: Check for packet headroom at compile time;
>   12) virtio: Move allocation before initialization to avoid being stuck in middle of virtio init;
>   13) virtio: Add support for vlan filtering;
>   14) virtio: Add support for multiple mac addresses;
>   15) virtio: Add ability to set MAC address;
>   16) virtio: Free mbuf's with threshold, this makes its behavior more like ixgbe;
>   17) virtio: Use port IO to get PCI resource for security reasons and match virtio-net-pmd;
>   18) virtio: Fix descriptor index issue;
>   19) ether: Fix vlan strip/insert issue;
>   20) example/vhost: Avoid inserting vlan twice and guest and host;
>   21) example/vhost: Add vlan-strip cmd line option to turn on/off vlan strip on host;
>   22) virtio: Use soft vlan strip in mergeable Rx path, this makes it has consistent logic
>       with the normal Rx path.
>  
> Changes in v2:
>   23) virtio: Fix zero copy break issue, the vring should be ready before virtio PMD set
>       the status of DRIVER_OK;
>   24) virtio: Remove unnecessary hotspots in data path.
>  
> Changes in v3:
>   25) virtio: Fix wmb issue;
>   26) Fix one minor issue in patch 20, also fix its idention.
>
> Changes in v4:
>   27) Fix updating vring descriptor index issue and memory barrier issue;
>   28) Reslove comments for patch 17.
>
> Changchun Ouyang (10):
>   virtio: Use port IO to get PCI resource.
>   virtio: Fix descriptor index issue
>   ether: Fix vlan strip/insert issue
>   example/vhost: Avoid inserting vlan twice
>   example/vhost: Add vlan-strip cmd line option
>   virtio: Use soft vlan strip in mergeable Rx path
>   virtio: Fix zero copy break issue
>   virtio: Remove hotspots
>   virtio: Fix wmb issue
>   virtio: Fix updating vring descriptor index issue
>
> Stephen Hemminger (16):
>   virtio: Rearrange resource initialization
>   virtio: Use weaker barriers
>   virtio: Allow starting with link down
>   virtio: Add support for Link State interrupt
>   ether: Add soft vlan encap/decap functions
>   virtio: Use software vlan stripping
>   virtio: Remove unnecessary adapter structure
>   virtio: Remove redundant vq_alignment
>   virtio: Fix how states are handled during initialization
>   virtio: Make vtpci_get_status local
>   virtio: Check for packet headroom at compile time
>   virtio: Move allocation before initialization
>   virtio: Add support for vlan filtering
>   virtio: Add suport for multiple mac addresses
>   virtio: Add ability to set MAC address
>   virtio: Free mbuf's with threshold
>
>  examples/vhost/main.c                 |  70 +++--
>  lib/librte_ether/rte_ethdev.h         |   8 +
>  lib/librte_ether/rte_ether.h          |  76 +++++
>  lib/librte_pmd_virtio/Makefile        |   2 +
>  lib/librte_pmd_virtio/virtio_ethdev.c | 519 ++++++++++++++++++++++++++--------
>  lib/librte_pmd_virtio/virtio_ethdev.h |  12 +-
>  lib/librte_pmd_virtio/virtio_pci.c    |  20 +-
>  lib/librte_pmd_virtio/virtio_pci.h    |   8 +-
>  lib/librte_pmd_virtio/virtio_rxtx.c   | 154 +++++++---
>  lib/librte_pmd_virtio/virtqueue.h     |  59 +++-
>  10 files changed, 729 insertions(+), 199 deletions(-)
>



More information about the dev mailing list