[dpdk-dev] [PATCH v9 05/14] eal/pci: Consolidate pci address comparison APIs
Tetsuya Mukawa
mukawa at igel.co.jp
Thu Feb 19 03:49:36 CET 2015
This patch replaces pci_addr_comparison() and memcmp() of pci addresses by
rte_eal_compare_pci_addr().
To compare PCI addresses, rte_eal_compare_pci_addr() doesn't use memcmp().
This is because sizeof(struct rte_pci_addr) returns 6, but actually
this structure is like below.
struct rte_pci_addr {
uint16_t domain; /**< Device domain */
uint8_t bus; /**< Device bus */
uint8_t devid; /**< Device ID */
uint8_t function; /**< Device function. */
};
If the structure is dynamically allocated in a function without bzero,
last 1 byte may have value. As a result, memcmp may not work.
To avoid such a case, rte_eal_compare_pci_addr() compare following values.
dev_addr = (addr->domain << 24) | (addr->bus << 16) |
(addr->devid << 8) | addr->function;
v9:
- eal_compare_pci_addr() is replaced by rte_eal_compare_pci_addr().
- Fix commit log.
(Thanks to Thomas Monjalon)
v8:
- Fix pci_scan_one() to update sysfs values.
(Thanks to Qiu, Michael and Iremonger, Bernard)
v5:
- Fix pci_scan_one to handle pt_driver correctly.
v4:
- Fix calculation method of eal_compare_pci_addr().
- Add parameter checking.
Signed-off-by: Tetsuya Mukawa <mukawa at igel.co.jp>
---
lib/librte_eal/bsdapp/eal/eal_pci.c | 29 ++++++++++++--------------
lib/librte_eal/common/eal_common_pci.c | 2 +-
lib/librte_eal/common/include/rte_pci.h | 34 +++++++++++++++++++++++++++++++
lib/librte_eal/linuxapp/eal/eal_pci.c | 30 +++++++++++++--------------
lib/librte_eal/linuxapp/eal/eal_pci_uio.c | 2 +-
5 files changed, 63 insertions(+), 34 deletions(-)
diff --git a/lib/librte_eal/bsdapp/eal/eal_pci.c b/lib/librte_eal/bsdapp/eal/eal_pci.c
index 74ecce7..9193f80 100644
--- a/lib/librte_eal/bsdapp/eal/eal_pci.c
+++ b/lib/librte_eal/bsdapp/eal/eal_pci.c
@@ -270,20 +270,6 @@ pci_uio_map_resource(struct rte_pci_device *dev)
return (0);
}
-/* Compare two PCI device addresses. */
-static int
-pci_addr_comparison(struct rte_pci_addr *addr, struct rte_pci_addr *addr2)
-{
- uint64_t dev_addr = (addr->domain << 24) + (addr->bus << 16) + (addr->devid << 8) + addr->function;
- uint64_t dev_addr2 = (addr2->domain << 24) + (addr2->bus << 16) + (addr2->devid << 8) + addr2->function;
-
- if (dev_addr > dev_addr2)
- return 1;
- else
- return 0;
-}
-
-
/* Scan one pci sysfs entry, and fill the devices list from it. */
static int
pci_scan_one(int dev_pci_fd, struct pci_conf *conf)
@@ -356,13 +342,24 @@ pci_scan_one(int dev_pci_fd, struct pci_conf *conf)
}
else {
struct rte_pci_device *dev2 = NULL;
+ int ret;
TAILQ_FOREACH(dev2, &pci_device_list, next) {
- if (pci_addr_comparison(&dev->addr, &dev2->addr))
+ ret = rte_eal_compare_pci_addr(&dev->addr, &dev2->addr);
+ if (ret > 0)
continue;
- else {
+ else if (ret < 0) {
TAILQ_INSERT_BEFORE(dev2, dev, next);
return 0;
+ } else { /* already registered */
+ /* update pt_driver */
+ dev2->pt_driver = dev->pt_driver;
+ dev2->max_vfs = dev->max_vfs;
+ memmove(dev2->mem_resource,
+ dev->mem_resource,
+ sizeof(dev->mem_resource));
+ free(dev);
+ return 0;
}
}
TAILQ_INSERT_TAIL(&pci_device_list, dev, next);
diff --git a/lib/librte_eal/common/eal_common_pci.c b/lib/librte_eal/common/eal_common_pci.c
index f3c7f71..bf2793f 100644
--- a/lib/librte_eal/common/eal_common_pci.c
+++ b/lib/librte_eal/common/eal_common_pci.c
@@ -93,7 +93,7 @@ static struct rte_devargs *pci_devargs_lookup(struct rte_pci_device *dev)
if (devargs->type != RTE_DEVTYPE_BLACKLISTED_PCI &&
devargs->type != RTE_DEVTYPE_WHITELISTED_PCI)
continue;
- if (!memcmp(&dev->addr, &devargs->pci.addr, sizeof(dev->addr)))
+ if (!rte_eal_compare_pci_addr(&dev->addr, &devargs->pci.addr))
return devargs;
}
return NULL;
diff --git a/lib/librte_eal/common/include/rte_pci.h b/lib/librte_eal/common/include/rte_pci.h
index 7f2d699..c609ef3 100644
--- a/lib/librte_eal/common/include/rte_pci.h
+++ b/lib/librte_eal/common/include/rte_pci.h
@@ -269,6 +269,40 @@ eal_parse_pci_DomBDF(const char *input, struct rte_pci_addr *dev_addr)
}
#undef GET_PCIADDR_FIELD
+/* Compare two PCI device addresses. */
+/**
+ * Utility function to compare two PCI device addresses.
+ *
+ * @param addr
+ * The PCI Bus-Device-Function address to compare
+ * @param addr2
+ * The PCI Bus-Device-Function address to compare
+ * @return
+ * 0 on equal PCI address.
+ * Positive on addr is greater than addr2.
+ * Negative on addr is less than addr2, or error.
+ */
+static inline int
+rte_eal_compare_pci_addr(struct rte_pci_addr *addr, struct rte_pci_addr *addr2)
+{
+ uint64_t dev_addr, dev_addr2;
+
+ if ((addr == NULL) || (addr2 == NULL))
+ return -1;
+
+ dev_addr = (addr->domain << 24) | (addr->bus << 16) |
+ (addr->devid << 8) | addr->function;
+ dev_addr2 = (addr2->domain << 24) | (addr2->bus << 16) |
+ (addr2->devid << 8) | addr2->function;
+
+ if (dev_addr > dev_addr2)
+ return 1;
+ else if (dev_addr < dev_addr2)
+ return -1;
+ else
+ return 0;
+}
+
/**
* Probe the PCI bus for registered drivers.
*
diff --git a/lib/librte_eal/linuxapp/eal/eal_pci.c b/lib/librte_eal/linuxapp/eal/eal_pci.c
index 3c463b2..f593f2c 100644
--- a/lib/librte_eal/linuxapp/eal/eal_pci.c
+++ b/lib/librte_eal/linuxapp/eal/eal_pci.c
@@ -41,6 +41,7 @@
#include <rte_eal_memconfig.h>
#include <rte_malloc.h>
#include <rte_devargs.h>
+#include <rte_memcpy.h>
#include "rte_pci_dev_ids.h"
#include "eal_filesystem.h"
@@ -229,20 +230,6 @@ error:
return -1;
}
-/* Compare two PCI device addresses. */
-static int
-pci_addr_comparison(struct rte_pci_addr *addr, struct rte_pci_addr *addr2)
-{
- uint64_t dev_addr = (addr->domain << 24) + (addr->bus << 16) + (addr->devid << 8) + addr->function;
- uint64_t dev_addr2 = (addr2->domain << 24) + (addr2->bus << 16) + (addr2->devid << 8) + addr2->function;
-
- if (dev_addr > dev_addr2)
- return 1;
- else
- return 0;
-}
-
-
/* Scan one pci sysfs entry, and fill the devices list from it. */
static int
pci_scan_one(const char *dirname, uint16_t domain, uint8_t bus,
@@ -360,13 +347,24 @@ pci_scan_one(const char *dirname, uint16_t domain, uint8_t bus,
}
else {
struct rte_pci_device *dev2 = NULL;
+ int ret;
TAILQ_FOREACH(dev2, &pci_device_list, next) {
- if (pci_addr_comparison(&dev->addr, &dev2->addr))
+ ret = rte_eal_compare_pci_addr(&dev->addr, &dev2->addr);
+ if (ret > 0)
continue;
- else {
+ else if (ret < 0) {
TAILQ_INSERT_BEFORE(dev2, dev, next);
return 0;
+ } else { /* already registered */
+ /* update pt_driver */
+ dev2->pt_driver = dev->pt_driver;
+ dev2->max_vfs = dev->max_vfs;
+ memmove(dev2->mem_resource,
+ dev->mem_resource,
+ sizeof(dev->mem_resource));
+ free(dev);
+ return 0;
}
}
TAILQ_INSERT_TAIL(&pci_device_list, dev, next);
diff --git a/lib/librte_eal/linuxapp/eal/eal_pci_uio.c b/lib/librte_eal/linuxapp/eal/eal_pci_uio.c
index e53f06b..d75eb59 100644
--- a/lib/librte_eal/linuxapp/eal/eal_pci_uio.c
+++ b/lib/librte_eal/linuxapp/eal/eal_pci_uio.c
@@ -123,7 +123,7 @@ pci_uio_map_secondary(struct rte_pci_device *dev)
TAILQ_FOREACH(uio_res, pci_res_list, next) {
/* skip this element if it doesn't match our PCI address */
- if (memcmp(&uio_res->pci_addr, &dev->addr, sizeof(dev->addr)))
+ if (rte_eal_compare_pci_addr(&uio_res->pci_addr, &dev->addr))
continue;
for (i = 0; i != uio_res->nb_maps; i++) {
--
1.9.1
More information about the dev
mailing list