[dpdk-dev] [PATCH v5 4/6] ether: Check VMDq RSS mode
Ouyang Changchun
changchun.ouyang at intel.com
Wed Jan 7 07:32:33 CET 2015
Check mq mode for VMDq RSS, handle it correctly instead of returning an error;
Also remove the limitation of per pool queue number has max value of 1, because
the per pool queue number could be 2 or 4 if it is VMDq RSS mode;
The number of rxq specified in config will determine the mq mode for VMDq RSS.
Signed-off-by: Changchun Ouyang <changchun.ouyang at intel.com>
changes in v5:
- Fix '<' issue, it should be '<=' to test rxq number;
- Extract a function to remove the embeded switch-case statement.
---
lib/librte_ether/rte_ethdev.c | 50 ++++++++++++++++++++++++++++++++++++++-----
1 file changed, 45 insertions(+), 5 deletions(-)
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 95f2ceb..8363e26 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -503,6 +503,31 @@ rte_eth_dev_tx_queue_config(struct rte_eth_dev *dev, uint16_t nb_queues)
}
static int
+rte_eth_dev_check_vf_rss_rxq_num(uint8_t port_id, uint16_t nb_rx_q)
+{
+ struct rte_eth_dev *dev = &rte_eth_devices[port_id];
+ switch (nb_rx_q) {
+ case 1:
+ case 2:
+ RTE_ETH_DEV_SRIOV(dev).active =
+ ETH_64_POOLS;
+ break;
+ case 4:
+ RTE_ETH_DEV_SRIOV(dev).active =
+ ETH_32_POOLS;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool = nb_rx_q;
+ RTE_ETH_DEV_SRIOV(dev).def_pool_q_idx =
+ dev->pci_dev->max_vfs * nb_rx_q;
+
+ return 0;
+}
+
+static int
rte_eth_dev_check_mq_mode(uint8_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
const struct rte_eth_conf *dev_conf)
{
@@ -510,8 +535,7 @@ rte_eth_dev_check_mq_mode(uint8_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
if (RTE_ETH_DEV_SRIOV(dev).active != 0) {
/* check multi-queue mode */
- if ((dev_conf->rxmode.mq_mode == ETH_MQ_RX_RSS) ||
- (dev_conf->rxmode.mq_mode == ETH_MQ_RX_DCB) ||
+ if ((dev_conf->rxmode.mq_mode == ETH_MQ_RX_DCB) ||
(dev_conf->rxmode.mq_mode == ETH_MQ_RX_DCB_RSS) ||
(dev_conf->txmode.mq_mode == ETH_MQ_TX_DCB)) {
/* SRIOV only works in VMDq enable mode */
@@ -525,7 +549,6 @@ rte_eth_dev_check_mq_mode(uint8_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
}
switch (dev_conf->rxmode.mq_mode) {
- case ETH_MQ_RX_VMDQ_RSS:
case ETH_MQ_RX_VMDQ_DCB:
case ETH_MQ_RX_VMDQ_DCB_RSS:
/* DCB/RSS VMDQ in SRIOV mode, not implement yet */
@@ -534,6 +557,25 @@ rte_eth_dev_check_mq_mode(uint8_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
"unsupported VMDQ mq_mode rx %u\n",
port_id, dev_conf->rxmode.mq_mode);
return (-EINVAL);
+ case ETH_MQ_RX_RSS:
+ PMD_DEBUG_TRACE("ethdev port_id=%" PRIu8
+ " SRIOV active, "
+ "Rx mq mode is changed from:"
+ "mq_mode %u into VMDQ mq_mode %u\n",
+ port_id,
+ dev_conf->rxmode.mq_mode,
+ dev->data->dev_conf.rxmode.mq_mode);
+ case ETH_MQ_RX_VMDQ_RSS:
+ dev->data->dev_conf.rxmode.mq_mode = ETH_MQ_RX_VMDQ_RSS;
+ if (nb_rx_q <= RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool)
+ if (rte_eth_dev_check_vf_rss_rxq_num(port_id, nb_rx_q) != 0) {
+ PMD_DEBUG_TRACE("ethdev port_id=%d"
+ " SRIOV active, invalid queue"
+ " number for VMDQ RSS\n",
+ port_id);
+ return -EINVAL;
+ }
+ break;
default: /* ETH_MQ_RX_VMDQ_ONLY or ETH_MQ_RX_NONE */
/* if nothing mq mode configure, use default scheme */
dev->data->dev_conf.rxmode.mq_mode = ETH_MQ_RX_VMDQ_ONLY;
@@ -553,8 +595,6 @@ rte_eth_dev_check_mq_mode(uint8_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
default: /* ETH_MQ_TX_VMDQ_ONLY or ETH_MQ_TX_NONE */
/* if nothing mq mode configure, use default scheme */
dev->data->dev_conf.txmode.mq_mode = ETH_MQ_TX_VMDQ_ONLY;
- if (RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool > 1)
- RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool = 1;
break;
}
--
1.8.4.2
More information about the dev
mailing list