[dpdk-dev] [PATCH v3 05/10] examples/tep_termination:add UDP port configuration for UDP tunneling packet

Jijiang Liu jijiang.liu at intel.com
Mon Jun 8 05:01:43 CEST 2015


The port number of UDP tunneling packet is configurable, which has 16 entries in total for i40e.

Signed-off-by: Jijiang Liu <jijiang.liu at intel.com>
---
 examples/tep_termination/main.c        |   18 +++++++++++++++++-
 examples/tep_termination/vxlan_setup.c |   13 ++++++++++++-
 2 files changed, 29 insertions(+), 2 deletions(-)

diff --git a/examples/tep_termination/main.c b/examples/tep_termination/main.c
index bb0f345..ecea9e8 100644
--- a/examples/tep_termination/main.c
+++ b/examples/tep_termination/main.c
@@ -109,6 +109,7 @@
 #define MAC_ADDR_CMP 0xFFFFFFFFFFFFULL
 
 #define CMD_LINE_OPT_NB_DEVICES "nb-devices"
+#define CMD_LINE_OPT_UDP_PORT "udp-port"
 #define CMD_LINE_OPT_RX_RETRY "rx-retry"
 #define CMD_LINE_OPT_RX_RETRY_DELAY "rx-retry-delay"
 #define CMD_LINE_OPT_RX_RETRY_NUM "rx-retry-num"
@@ -133,6 +134,9 @@ struct vpool {
 	uint32_t buf_size;
 } vpool_array[MAX_QUEUES+MAX_QUEUES];
 
+/* UDP tunneling port */
+uint16_t udp_port;
+
 /* overlay packet operation */
 struct ol_switch_ops overlay_options = {
 	.port_configure = vxlan_port_init,
@@ -254,6 +258,7 @@ static void
 tep_termination_usage(const char *prgname)
 {
 	RTE_LOG(INFO, VHOST_CONFIG, "%s [EAL options] -- -p PORTMASK\n"
+	"               --udp-port: UDP destination port for VXLAN packet\n"
 	"		--nb-devices[1-64]: The number of virtIO device\n"
 	"		-p PORTMASK: Set mask for ports to be used by application\n"
 	"		--rx-retry [0|1]: disable/enable(default) retries on rx."
@@ -279,6 +284,7 @@ tep_termination_parse_args(int argc, char **argv)
 	const char *prgname = argv[0];
 	static struct option long_option[] = {
 		{CMD_LINE_OPT_NB_DEVICES, required_argument, NULL, 0},
+		{CMD_LINE_OPT_UDP_PORT, required_argument, NULL, 0},
 		{CMD_LINE_OPT_RX_RETRY, required_argument, NULL, 0},
 		{CMD_LINE_OPT_RX_RETRY_DELAY, required_argument, NULL, 0},
 		{CMD_LINE_OPT_RX_RETRY_NUM, required_argument, NULL, 0},
@@ -325,6 +331,17 @@ tep_termination_parse_args(int argc, char **argv)
 					enable_retry = ret;
 			}
 
+			if (!strncmp(long_option[option_index].name, CMD_LINE_OPT_UDP_PORT,
+					sizeof(CMD_LINE_OPT_UDP_PORT))) {
+				ret = parse_num_opt(optarg, INT16_MAX);
+				if (ret == -1) {
+					RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for UDP port [0-N]\n");
+						tep_termination_usage(prgname);
+					return -1;
+				} else
+					udp_port = ret;
+			}
+
 			/* Specify the retries delay time (in useconds) on RX. */
 			if (!strncmp(long_option[option_index].name, CMD_LINE_OPT_RX_RETRY_DELAY,
 					sizeof(CMD_LINE_OPT_RX_RETRY_DELAY))) {
@@ -1074,7 +1091,6 @@ main(int argc, char *argv[])
 		rte_eal_remote_launch(switch_worker,
 			mbuf_pool, lcore_id);
 	}
-
 	rte_vhost_feature_disable(1ULL << VIRTIO_NET_F_MRG_RXBUF);
 
 	/* Register CUSE device to handle IOCTLs. */
diff --git a/examples/tep_termination/vxlan_setup.c b/examples/tep_termination/vxlan_setup.c
index e604b14..fc4f9de 100644
--- a/examples/tep_termination/vxlan_setup.c
+++ b/examples/tep_termination/vxlan_setup.c
@@ -72,6 +72,7 @@
 #define RTE_TEST_TX_DESC_DEFAULT 512
 
 extern uint16_t nb_devices;
+extern uint16_t udp_port;
 extern uint8_t ports[RTE_MAX_ETHPORTS];
 
 /* ethernet addresses of ports */
@@ -135,9 +136,12 @@ vxlan_port_init(uint8_t port, struct rte_mempool *mbuf_pool)
 	uint16_t rx_rings, tx_rings = (uint16_t)rte_lcore_count();
 	const uint16_t rx_ring_size = RTE_TEST_RX_DESC_DEFAULT;
 	const uint16_t tx_ring_size = RTE_TEST_TX_DESC_DEFAULT;
+	struct rte_eth_udp_tunnel tunnel_udp;
 	struct rte_eth_rxconf *rxconf;
 	struct rte_eth_txconf *txconf;
+	struct vxlan_conf *pconf = &vxdev;
 
+	pconf->dst_port = udp_port;
 	rte_eth_dev_info_get (port, &dev_info);
 
 	if (dev_info.max_rx_queues > MAX_QUEUES) {
@@ -180,6 +184,12 @@ vxlan_port_init(uint8_t port, struct rte_mempool *mbuf_pool)
 	if (retval < 0)
 		return retval;
 
+	/* Configure UDP port for UDP tunneling */
+	tunnel_udp.udp_port = udp_port;
+	tunnel_udp.prot_type = RTE_TUNNEL_TYPE_VXLAN;
+	retval = rte_eth_dev_udp_tunnel_add(port, &tunnel_udp);
+	if (retval < 0)
+		return retval;
 	rte_eth_macaddr_get(port, &ports_eth_addr[port]);
 	RTE_LOG(INFO, PORT, "Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
 			" %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
@@ -190,13 +200,14 @@ vxlan_port_init(uint8_t port, struct rte_mempool *mbuf_pool)
 			ports_eth_addr[port].addr_bytes[3],
 			ports_eth_addr[port].addr_bytes[4],
 			ports_eth_addr[port].addr_bytes[5]);
+
 	return 0;
 }
 
 static int
 vxlan_rx_process(struct rte_mbuf *pkt)
 {
-	return  decapsulation(pkt);
+	return decapsulation(pkt);
 }
 
 static void
-- 
1.7.7.6



More information about the dev mailing list