[dpdk-dev] [PATCH v2 1/2] doc: update programmers guide for fm10k pmd driver

Chen Jing D(Mark) jing.d.chen at intel.com
Fri Mar 13 10:14:18 CET 2015


From: "Chen Jing D(Mark)" <jing.d.chen at intel.com>

DPDK introduced pmd driver for PCIE host-interface of Intel Ethernet
Switch FM10000 Series, update programming guide to describe the new
driver and usage.

Signed-off-by: Chen Jing D(Mark) <jing.d.chen at intel.com>
---
 .../prog_guide/i40e_ixgbe_igb_virt_func_drv.rst    |   37 ++++++++++++++++++-
 doc/guides/prog_guide/source_org.rst               |    1 +
 2 files changed, 36 insertions(+), 2 deletions(-)

diff --git a/doc/guides/prog_guide/i40e_ixgbe_igb_virt_func_drv.rst b/doc/guides/prog_guide/i40e_ixgbe_igb_virt_func_drv.rst
index 41e316e..8ea518d 100755
--- a/doc/guides/prog_guide/i40e_ixgbe_igb_virt_func_drv.rst
+++ b/doc/guides/prog_guide/i40e_ixgbe_igb_virt_func_drv.rst
@@ -53,9 +53,10 @@ Refer to Figure 10.
 
 Therefore, a NIC is logically distributed among multiple virtual machines (as shown in Figure 10),
 while still having global data in common to share with the Physical Function and other Virtual Functions.
-The DPDK i40evf, igbvf or ixgbevf as a Poll Mode Driver (PMD) serves for the Intel® 82576 Gigabit Ethernet Controller,
+The DPDK fm10kvf, i40evf, igbvf or ixgbevf as a Poll Mode Driver (PMD) serves for the Intel® 82576 Gigabit Ethernet Controller,
 Intel® Ethernet Controller I350 family, Intel® 82599 10 Gigabit Ethernet Controller NIC,
-or Intel® Fortville 10/40 Gigabit Ethernet Controller NIC's virtual PCI function.
+Intel® Fortville 10/40 Gigabit Ethernet Controller NIC's virtual PCI function,or PCIE host-interface of the Intel Ethernet Switch
+FM10000 Series.
 Meanwhile the DPDK Poll Mode Driver (PMD) also supports "Physical Function" of such NIC's on the host.
 
 The DPDK PF/VF Poll Mode Driver (PMD) supports the Layer 2 switch on Intel® 82576 Gigabit Ethernet Controller,
@@ -93,6 +94,38 @@ and the Physical Function operates on the global resources on behalf of the Virt
 For this out-of-band communication, an SR-IOV enabled NIC provides a memory buffer for each Virtual Function,
 which is called a "Mailbox".
 
+
+The PCIE host-interface of Intel Ethernet Switch FM10000 Series VF infrastructure
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+In a virtualized environment, the programmer can enable a maximum of *64 Virtual Functions (VF)*
+globally per PCIE host-interface of the Intel Ethernet Switch FM10000 Series device.
+Each VF can have a maximum of 16 queue pairs.
+The Physical Function in host could be only configured by the Linux* fm10k driver
+(in the case of the Linux Kernel-based Virtual Machine [KVM]), DPDK PMD PF driver doesn't support it yet.
+
+For example,
+
+*   Using Linux* fm10k driver:
+
+    .. code-block:: console
+
+        rmmod fm10k (To remove the fm10k module)
+        insmod fm0k.ko max_vfs=2,2 (To enable two Virtual Functions per port)
+
+Virtual Function enumeration is performed in the following sequence by the Linux* pci driver for a dual-port NIC.
+When you enable the four Virtual Functions with the above command, the four enabled functions have a Function#
+represented by (Bus#, Device#, Function#) in sequence starting from 0 to 3.
+However:
+
+*   Virtual Functions 0 and 2 belong to Physical Function 0
+
+*   Virtual Functions 1 and 3 belong to Physical Function 1
+
+.. note::
+
+    The above is an important consideration to take into account when targeting specific packets to a selected port.
+
 Intel® Fortville 10/40 Gigabit Ethernet Controller VF Infrastructure
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
diff --git a/doc/guides/prog_guide/source_org.rst b/doc/guides/prog_guide/source_org.rst
index c66ad16..061f107 100644
--- a/doc/guides/prog_guide/source_org.rst
+++ b/doc/guides/prog_guide/source_org.rst
@@ -81,6 +81,7 @@ The lib directory contains::
     +-- librte_net          # various IP-related headers
     +-- librte_pmd_bond     # bonding poll mode driver
     +-- librte_pmd_e1000    # 1GbE poll mode drivers (igb and em)
+    +-- librte_pmd_fm10k    # Host interface PMD driver for FM10000 Series
     +-- librte_pmd_ixgbe    # 10GbE poll mode driver
     +-- librte_pmd_i40e     # 40GbE poll mode driver
     +-- librte_pmd_mlx4     # Mellanox ConnectX-3 poll mode driver
-- 
1.7.7.6



More information about the dev mailing list