[dpdk-dev] [PATCH] igb: handle VF LPE mailbox message

[Ananyev, Konstantin]

> -----Original Message-----
> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Sergio Gonzalez Monroy
> Sent: Wednesday, March 18, 2015 12:02 PM
> To: dev at dpdk.org
> Subject: [dpdk-dev] [PATCH] igb: handle VF LPE mailbox message
> 
> This patch adds the handle function for the LPE mailbox message (VF to
> PF) to set maximum packet size, which can be used to enable jumbo
> frame support.
> 
> Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy at intel.com>

Acked-by: Konstantin Ananyev <konstantin.ananyev at intel.com>

> ---
>  lib/librte_pmd_e1000/igb_pf.c | 28 ++++++++++++++++++++++++++++
>  1 file changed, 28 insertions(+)
> 
> diff --git a/lib/librte_pmd_e1000/igb_pf.c b/lib/librte_pmd_e1000/igb_pf.c
> index bc3816a..2d49379 100644
> --- a/lib/librte_pmd_e1000/igb_pf.c
> +++ b/lib/librte_pmd_e1000/igb_pf.c
> @@ -395,6 +395,31 @@ igb_vf_set_vlan(struct rte_eth_dev *dev, uint32_t vf, uint32_t *msgbuf)
>  }
> 
>  static int
> +igb_vf_set_rlpml(struct rte_eth_dev *dev, uint32_t vf, uint32_t *msgbuf)
> +{
> +	struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> +	uint16_t rlpml = msgbuf[1] & E1000_VMOLR_RLPML_MASK;
> +	uint32_t max_frame = rlpml + ETHER_HDR_LEN + ETHER_CRC_LEN;
> +	uint32_t vmolr;
> +
> +	if ((max_frame < ETHER_MIN_LEN) || (max_frame > ETHER_MAX_JUMBO_FRAME_LEN))
> +		return -1;
> +
> +	vmolr = E1000_READ_REG(hw, E1000_VMOLR(vf));
> +
> +	vmolr &= ~E1000_VMOLR_RLPML_MASK;
> +	vmolr |= rlpml;
> +
> +	/* Enable Long Packet support */
> +	vmolr |= E1000_VMOLR_LPE;
> +
> +	E1000_WRITE_REG(hw, E1000_VMOLR(vf), vmolr);
> +	E1000_WRITE_FLUSH(hw);
> +
> +	return 0;
> +}
> +
> +static int
>  igb_rcv_msg_from_vf(struct rte_eth_dev *dev, uint16_t vf)
>  {
>  	uint16_t mbx_size = E1000_VFMAILBOX_SIZE;
> @@ -428,6 +453,9 @@ igb_rcv_msg_from_vf(struct rte_eth_dev *dev, uint16_t vf)
>  	case E1000_VF_SET_MULTICAST:
>  		retval = igb_vf_set_multicast(dev, vf, msgbuf);
>  		break;
> +	case E1000_VF_SET_LPE:
> +		retval = igb_vf_set_rlpml(dev, vf, msgbuf);
> +		break;
>  	case E1000_VF_SET_VLAN:
>  		retval = igb_vf_set_vlan(dev, vf, msgbuf);
>  		break;
> --
> 1.9.3