[dpdk-dev] [PATCH] kni: fix igb and ixgbe kni ethtool get_link op
贾学涛
jiaxt at sinogrid.com
Sun May 10 08:26:09 CEST 2015
Hi Helin,
No matter the cable is plugged or not, the return value of link detected
is yes when I run ethtool on a kni interface.
But the return values of speed and duplex are correct. So I just copy
the link detected codes of get_settings op.
On 05/04/2015 04:55 PM, Zhang, Helin wrote:
> Hi Chia
>
>> -----Original Message-----
>> From: dev [mailto:dev-bounces at dpdk.org] On Behalf Of Shelton Chia
>> Sent: Friday, April 3, 2015 11:19 PM
>> To: dev at dpdk.org
>> Subject: [dpdk-dev] [PATCH] kni: fix igb and ixgbe kni ethtool get_link op
>>
>> igb and ixgbe's link detected always return yes, fix get_link func refer to
>> get_settings, it works correctly for my i350 and 82599es nic.
> Could you help to add more detailed description of why we need these code changes? Thanks!
>> Signed-off-by: Shelton Chia <jiaxt at sinogrid.com>
>> ---
>> .../linuxapp/kni/ethtool/igb/igb_ethtool.c | 18 ++++++---------
>> .../linuxapp/kni/ethtool/ixgbe/ixgbe_ethtool.c | 26
>> +++++++++++++++++++++-
>> 2 files changed, 32 insertions(+), 12 deletions(-)
>>
>> diff --git a/lib/librte_eal/linuxapp/kni/ethtool/igb/igb_ethtool.c
>> b/lib/librte_eal/linuxapp/kni/ethtool/igb/igb_ethtool.c
>> index f3c48b2..5457f48 100644
>> --- a/lib/librte_eal/linuxapp/kni/ethtool/igb/igb_ethtool.c
>> +++ b/lib/librte_eal/linuxapp/kni/ethtool/igb/igb_ethtool.c
>> @@ -383,19 +383,15 @@ static int igb_set_settings(struct net_device
>> *netdev, struct ethtool_cmd *ecmd) static u32 igb_get_link(struct
>> net_device *netdev) {
>> struct igb_adapter *adapter = netdev_priv(netdev);
>> - struct e1000_mac_info *mac = &adapter->hw.mac;
>> + struct e1000_hw *hw = &adapter->hw;
>> + u32 status;
>>
>> - /*
>> - * If the link is not reported up to netdev, interrupts are disabled,
>> - * and so the physical link state may have changed since we last
>> - * looked. Set get_link_status to make sure that the true link
>> - * state is interrogated, rather than pulling a cached and possibly
>> - * stale link state from the driver.
>> - */
>> - if (!netif_carrier_ok(netdev))
>> - mac->get_link_status = 1;
>> + status = E1000_READ_REG(hw, E1000_STATUS);
> Can ' check_for_link ' be used for checking the link here? It needs to support
> all possible link types.
>
>> - return igb_has_link(adapter);
>> + if (status & E1000_STATUS_LU)
>> + return 1;
>> + else
>> + return 0;
>> }
>>
>> static void igb_get_pauseparam(struct net_device *netdev, diff --git
>> a/lib/librte_eal/linuxapp/kni/ethtool/ixgbe/ixgbe_ethtool.c
>> b/lib/librte_eal/linuxapp/kni/ethtool/ixgbe/ixgbe_ethtool.c
>> index 11472bd..184b14f 100644
>> --- a/lib/librte_eal/linuxapp/kni/ethtool/ixgbe/ixgbe_ethtool.c
>> +++ b/lib/librte_eal/linuxapp/kni/ethtool/ixgbe/ixgbe_ethtool.c
>> @@ -801,6 +801,30 @@ static void ixgbe_get_regs(struct net_device *netdev,
>> struct ethtool_regs *regs,
>> regs_buff[1128] = IXGBE_READ_REG(hw, IXGBE_MFLCN); }
>>
>> +static u32 ixgbe_get_link(struct net_device *netdev) {
>> + struct ixgbe_adapter *adapter = netdev_priv(netdev);
>> + struct ixgbe_hw *hw = &adapter->hw;
>> + u32 link_speed = 0;
>> + bool link_up;
>> +
>> + if (!in_interrupt()) {
>> + hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
> As done in kernel driver function ' ixgbe_watchdog_update_link ()', more checks
> may be needed.
>
> Regards,
> Helin
>
>> + } else {
>> + /*
>> + * this case is a special workaround for RHEL5 bonding
>> + * that calls this routine from interrupt context
>> + */
>> + link_speed = adapter->link_speed;
>> + link_up = adapter->link_up;
>> + }
>> +
>> + if (link_up)
>> + return 1;
>> + else
>> + return 0;
>> +}
>> +
>> static int ixgbe_get_eeprom_len(struct net_device *netdev) {
>> struct ixgbe_adapter *adapter = netdev_priv(netdev); @@ -2838,7
>> +2862,7 @@ struct ethtool_ops ixgbe_ethtool_ops = {
>> .get_wol = ixgbe_get_wol,
>> .set_wol = ixgbe_set_wol,
>> .nway_reset = ixgbe_nway_reset,
>> - .get_link = ethtool_op_get_link,
>> + .get_link = ixgbe_get_link,
>> .get_eeprom_len = ixgbe_get_eeprom_len,
>> .get_eeprom = ixgbe_get_eeprom,
>> .set_eeprom = ixgbe_set_eeprom,
>> --
>> 2.3.5
--
贾学涛
信诺瑞得西安研发中心
More information about the dev
mailing list