[dpdk-dev] [PATCH 6/6] doc: extend commands in testpmd

[Jingjing Wu]

Modify the doc about flow director commands to support l2_payload
flow type and filtering in VFs.

Signed-off-by: Jingjing Wu <jingjing.wu at intel.com>
---
 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 761172e..3d56097 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -1527,27 +1527,28 @@ Different NICs may have different capabilities, command show port fdir (port_id)
 
 flow_director_filter (port_id) (add|del|update) flow (ipv4-other|ipv4-frag|ipv6-other|ipv6-frag)
 src (src_ip_address) dst (dst_ip_address) vlan (vlan_value) flexbytes (flexbytes_value)
-(drop|fwd) queue (queue_id) fd_id (fd_id_value)
+(drop|fwd) pf|vf(vf_id) queue (queue_id) fd_id (fd_id_value)
 
 flow_director_filter (port_id) (add|del|update) flow (ipv4-tcp|ipv4-udp|ipv6-tcp|ipv6-udp)
 src (src_ip_address) (src_port) dst (dst_ip_address) (dst_port) vlan (vlan_value)
-flexbytes (flexbytes_value) (drop|fwd) queue (queue_id) fd_id (fd_id_value)
+flexbytes (flexbytes_value) (drop|fwd) pf|vf(vf_id) queue (queue_id) fd_id (fd_id_value)
 
 flow_director_filter (port_id) (add|del|update) flow (ipv4-sctp|ipv6-sctp)
 src (src_ip_address) (src_port) dst (dst_ip_address) (dst_port) tag (verification_tag)
-vlan (vlan_value) flexbytes (flexbytes_value) (drop|fwd) queue (queue_id) fd_id (fd_id_value)
+vlan (vlan_value) flexbytes (flexbytes_value) (drop|fwd) pf|vf(vf_id) queue (queue_id) fd_id (fd_id_value)
 
-For example, to add an ipv4-udp flow type filter:
+flow_director_filter (port_id) (add|del|update) flow l2_payload
+ether (ethertype) flexbytes (flexbytes_value) (drop|fwd) pf|vf(vf_id) queue (queue_id) fd_id (fd_id_value)
 
 .. code-block:: console
 
-    testpmd> flow_director_filter 0 add flow ipv4-udp src 2.2.2.3 32 dst 2.2.2.5 33 vlan 0x1 flexbytes (0x88,0x48) fwd queue 1 fd_id 1
+    testpmd> flow_director_filter 0 add flow ipv4-udp src 2.2.2.3 32 dst 2.2.2.5 33 vlan 0x1 flexbytes (0x88,0x48) fwd pf queue 1 fd_id 1
 
 For example, add an ipv4-other flow type filter:
 
 .. code-block:: console
 
-    testpmd> flow_director_filter 0 add flow ipv4-other src 2.2.2.3 dst 2.2.2.5 vlan 0x1 flexbytes (0x88,0x48) fwd queue 1 fd_id 1
+    testpmd> flow_director_filter 0 add flow ipv4-other src 2.2.2.3 dst 2.2.2.5 vlan 0x1 flexbytes (0x88,0x48) fwd pf queue 1 fd_id 1
 
 flush_flow_director
 ~~~~~~~~~~~~~~~~~~~
@@ -1582,7 +1583,7 @@ flow_director_flex_mask
 set masks of flow director's flexible payload based on certain flow type:
 
 flow_director_flex_mask (port_id) flow (none|ipv4-other|ipv4-frag|ipv4-tcp|ipv4-udp|ipv4-sctp|
-ipv6-other|ipv6-frag|ipv6-tcp|ipv6-udp|ipv6-sctp|all) (mask)
+ipv6-other|ipv6-frag|ipv6-tcp|ipv6-udp|ipv6-sctp|l2_payload|all) (mask)
 
 Example, to set flow director's flex mask for all flow type on port 0:
 
-- 
1.9.3