[dpdk-dev] [PATCH 5/5] ixgbe: silence noisy log messages
Bruce Richardson
bruce.richardson at intel.com
Mon May 18 11:32:01 CEST 2015
On Fri, May 15, 2015 at 10:08:27AM -0700, Stephen Hemminger wrote:
> The ixgbe driver likes to be far to chatty in the system log
> which is good for the original developer but not good for a production
> product. All the normal messages should be changed from INFO to DEBUG.
>
> Signed-off-by: Stephen Hemminger <stephen at networkplumber.org>
For the most part, this looks fine. However, I'm unsure about changing the log
level of the messages stating what the RX and TX burst functions in use are. I
would view this as important information that should generally be displayed as
the performance impacts of using a sub-optimal RX/TX code path are large.
/Bruce
> ---
> lib/librte_pmd_ixgbe/ixgbe_ethdev.c | 14 +++++++-------
> lib/librte_pmd_ixgbe/ixgbe_rxtx.c | 20 ++++++++++----------
> 2 files changed, 17 insertions(+), 17 deletions(-)
>
> diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
> index 7e75382..bb24a17 100644
> --- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
> +++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
> @@ -568,7 +568,7 @@ ixgbe_dev_queue_stats_mapping_set(struct rte_eth_dev *eth_dev,
> (hw->mac.type != ixgbe_mac_X550EM_x))
> return -ENOSYS;
>
> - PMD_INIT_LOG(INFO, "Setting port %u, %s queue_id %d to stat index %d",
> + PMD_INIT_LOG(DEBUG, "Setting port %u, %s queue_id %d to stat index %d",
> eth_dev->data->port_id, is_rx ? "RX" : "TX",
> queue_id, stat_idx);
>
> @@ -594,20 +594,20 @@ ixgbe_dev_queue_stats_mapping_set(struct rte_eth_dev *eth_dev,
> else
> stat_mappings->rqsmr[n] |= qsmr_mask;
>
> - PMD_INIT_LOG(INFO, "Set port %u, %s queue_id %d to stat index %d",
> + PMD_INIT_LOG(DEBUG, "Set port %u, %s queue_id %d to stat index %d",
> eth_dev->data->port_id, is_rx ? "RX" : "TX",
> queue_id, stat_idx);
> - PMD_INIT_LOG(INFO, "%s[%d] = 0x%08x", is_rx ? "RQSMR" : "TQSM", n,
> + PMD_INIT_LOG(DEBUG, "%s[%d] = 0x%08x", is_rx ? "RQSMR" : "TQSM", n,
> is_rx ? stat_mappings->rqsmr[n] : stat_mappings->tqsm[n]);
>
> /* Now write the mapping in the appropriate register */
> if (is_rx) {
> - PMD_INIT_LOG(INFO, "Write 0x%x to RX IXGBE stat mapping reg:%d",
> + PMD_INIT_LOG(DEBUG, "Write 0x%x to RX IXGBE stat mapping reg:%d",
> stat_mappings->rqsmr[n], n);
> IXGBE_WRITE_REG(hw, IXGBE_RQSMR(n), stat_mappings->rqsmr[n]);
> }
> else {
> - PMD_INIT_LOG(INFO, "Write 0x%x to TX IXGBE stat mapping reg:%d",
> + PMD_INIT_LOG(DEBUG, "Write 0x%x to TX IXGBE stat mapping reg:%d",
> stat_mappings->tqsm[n], n);
> IXGBE_WRITE_REG(hw, IXGBE_TQSM(n), stat_mappings->tqsm[n]);
> }
> @@ -751,7 +751,7 @@ eth_ixgbe_dev_init(struct rte_eth_dev *eth_dev)
> ixgbe_set_tx_function(eth_dev, txq);
> } else {
> /* Use default TX function if we get here */
> - PMD_INIT_LOG(INFO, "No TX queues configured yet. "
> + PMD_INIT_LOG(DEBUG, "No TX queues configured yet. "
> "Using default TX function.");
> }
>
> @@ -2275,7 +2275,7 @@ ixgbe_dev_interrupt_get_status(struct rte_eth_dev *dev)
>
> /* read-on-clear nic registers here */
> eicr = IXGBE_READ_REG(hw, IXGBE_EICR);
> - PMD_DRV_LOG(INFO, "eicr %x", eicr);
> + PMD_DRV_LOG(DEBUG, "eicr %x", eicr);
>
> intr->flags = 0;
> if (eicr & IXGBE_EICR_LSC) {
> diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
> index 57c9430..08830bf 100644
> --- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
> +++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
> @@ -1871,23 +1871,23 @@ ixgbe_set_tx_function(struct rte_eth_dev *dev, struct ixgbe_tx_queue *txq)
> /* Use a simple Tx queue (no offloads, no multi segs) if possible */
> if (((txq->txq_flags & IXGBE_SIMPLE_FLAGS) == IXGBE_SIMPLE_FLAGS)
> && (txq->tx_rs_thresh >= RTE_PMD_IXGBE_TX_MAX_BURST)) {
> - PMD_INIT_LOG(INFO, "Using simple tx code path");
> + PMD_INIT_LOG(DEBUG, "Using simple tx code path");
> #ifdef RTE_IXGBE_INC_VECTOR
> if (txq->tx_rs_thresh <= RTE_IXGBE_TX_MAX_FREE_BUF_SZ &&
> (rte_eal_process_type() != RTE_PROC_PRIMARY ||
> ixgbe_txq_vec_setup(txq) == 0)) {
> - PMD_INIT_LOG(INFO, "Vector tx enabled.");
> + PMD_INIT_LOG(DEBUG, "Vector tx enabled.");
> dev->tx_pkt_burst = ixgbe_xmit_pkts_vec;
> } else
> #endif
> dev->tx_pkt_burst = ixgbe_xmit_pkts_simple;
> } else {
> - PMD_INIT_LOG(INFO, "Using full-featured tx code path");
> - PMD_INIT_LOG(INFO,
> + PMD_INIT_LOG(DEBUG, "Using full-featured tx code path");
> + PMD_INIT_LOG(DEBUG,
> " - txq_flags = %lx " "[IXGBE_SIMPLE_FLAGS=%lx]",
> (unsigned long)txq->txq_flags,
> (unsigned long)IXGBE_SIMPLE_FLAGS);
> - PMD_INIT_LOG(INFO,
> + PMD_INIT_LOG(DEBUG,
> " - tx_rs_thresh = %lu " "[RTE_PMD_IXGBE_TX_MAX_BURST=%lu]",
> (unsigned long)txq->tx_rs_thresh,
> (unsigned long)RTE_PMD_IXGBE_TX_MAX_BURST);
> @@ -3761,11 +3761,11 @@ void ixgbe_set_rx_function(struct rte_eth_dev *dev)
> */
> if (dev->data->lro) {
> if (adapter->rx_bulk_alloc_allowed) {
> - PMD_INIT_LOG(INFO, "LRO is requested. Using a bulk "
> + PMD_INIT_LOG(DEBUG, "LRO is requested. Using a bulk "
> "allocation version");
> dev->rx_pkt_burst = ixgbe_recv_pkts_lro_bulk_alloc;
> } else {
> - PMD_INIT_LOG(INFO, "LRO is requested. Using a single "
> + PMD_INIT_LOG(DEBUG, "LRO is requested. Using a single "
> "allocation version");
> dev->rx_pkt_burst = ixgbe_recv_pkts_lro_single_alloc;
> }
> @@ -3781,7 +3781,7 @@ void ixgbe_set_rx_function(struct rte_eth_dev *dev)
>
> dev->rx_pkt_burst = ixgbe_recv_scattered_pkts_vec;
> } else if (adapter->rx_bulk_alloc_allowed) {
> - PMD_INIT_LOG(INFO, "Using a Scattered with bulk "
> + PMD_INIT_LOG(DEBUG, "Using a Scattered with bulk "
> "allocation callback (port=%d).",
> dev->data->port_id);
> dev->rx_pkt_burst = ixgbe_recv_pkts_lro_bulk_alloc;
> @@ -3803,7 +3803,7 @@ void ixgbe_set_rx_function(struct rte_eth_dev *dev)
> * - Single buffer allocation (the simplest one)
> */
> } else if (adapter->rx_vec_allowed) {
> - PMD_INIT_LOG(INFO, "Vector rx enabled, please make sure RX "
> + PMD_INIT_LOG(DEBUG, "Vector rx enabled, please make sure RX "
> "burst size no less than 32.");
>
> dev->rx_pkt_burst = ixgbe_recv_pkts_vec;
> @@ -3961,7 +3961,7 @@ ixgbe_set_rsc(struct rte_eth_dev *dev)
>
> dev->data->lro = 1;
>
> - PMD_INIT_LOG(INFO, "enabling LRO mode");
> + PMD_INIT_LOG(DEBUG, "enabling LRO mode");
>
> return 0;
> }
> --
> 2.1.4
>
More information about the dev
mailing list