[dpdk-dev] [PATCH 02/17] ixgbe/base: avoid needless PHY access on copper phys

[Wenzhuo Lu]

Avoid a needless PHY access on copper phys to save the 10ms wait
time for each PHY access. A helper function is introduced to
actually do the register access and process the contents.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu at intel.com>
---
 drivers/net/ixgbe/base/ixgbe_phy.c  | 72 ++++++++++++++++++++++---------------
 drivers/net/ixgbe/base/ixgbe_type.h |  1 +
 2 files changed, 45 insertions(+), 28 deletions(-)

diff --git a/drivers/net/ixgbe/base/ixgbe_phy.c b/drivers/net/ixgbe/base/ixgbe_phy.c
index 51f32c6..1a83758 100644
--- a/drivers/net/ixgbe/base/ixgbe_phy.c
+++ b/drivers/net/ixgbe/base/ixgbe_phy.c
@@ -957,48 +957,64 @@ s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
 }
 
 /**
- *  ixgbe_get_copper_link_capabilities_generic - Determines link capabilities
- *  @hw: pointer to hardware structure
- *  @speed: pointer to link speed
- *  @autoneg: boolean auto-negotiation value
+ * ixgbe_get_copper_speeds_supported - Get copper link speeds from phy
+ * @hw: pointer to hardware structure
  *
- *  Determines the supported link capabilities by reading the PHY auto
- *  negotiation register.
+ * Determines the supported link capabilities by reading the PHY auto
+ * negotiation register.
  **/
-s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
-					       ixgbe_link_speed *speed,
-					       bool *autoneg)
+static s32 ixgbe_get_copper_speeds_supported(struct ixgbe_hw *hw)
 {
 	s32 status;
 	u16 speed_ability;
 
-	DEBUGFUNC("ixgbe_get_copper_link_capabilities_generic");
-
-	*speed = 0;
-	*autoneg = true;
-
 	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_SPEED_ABILITY,
 				      IXGBE_MDIO_PMA_PMD_DEV_TYPE,
 				      &speed_ability);
+	if (status)
+		return status;
 
-	if (status == IXGBE_SUCCESS) {
-		if (speed_ability & IXGBE_MDIO_PHY_SPEED_10G)
-			*speed |= IXGBE_LINK_SPEED_10GB_FULL;
-		if (speed_ability & IXGBE_MDIO_PHY_SPEED_1G)
-			*speed |= IXGBE_LINK_SPEED_1GB_FULL;
-		if (speed_ability & IXGBE_MDIO_PHY_SPEED_100M)
-			*speed |= IXGBE_LINK_SPEED_100_FULL;
+	if (speed_ability & IXGBE_MDIO_PHY_SPEED_10G)
+		hw->phy.speeds_supported |= IXGBE_LINK_SPEED_10GB_FULL;
+	if (speed_ability & IXGBE_MDIO_PHY_SPEED_1G)
+		hw->phy.speeds_supported |= IXGBE_LINK_SPEED_1GB_FULL;
+	if (speed_ability & IXGBE_MDIO_PHY_SPEED_100M)
+		hw->phy.speeds_supported |= IXGBE_LINK_SPEED_100_FULL;
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_X550:
+		hw->phy.speeds_supported |= IXGBE_LINK_SPEED_2_5GB_FULL;
+		hw->phy.speeds_supported |= IXGBE_LINK_SPEED_5GB_FULL;
+		break;
+	case ixgbe_mac_X550EM_x:
+		hw->phy.speeds_supported &= ~IXGBE_LINK_SPEED_100_FULL;
+		break;
+	default:
+		break;
 	}
 
-	/* Internal PHY does not support 100 Mbps */
-	if (hw->mac.type == ixgbe_mac_X550EM_x)
-		*speed &= ~IXGBE_LINK_SPEED_100_FULL;
+	return status;
+}
 
-	if (hw->mac.type == ixgbe_mac_X550) {
-		*speed |= IXGBE_LINK_SPEED_2_5GB_FULL;
-		*speed |= IXGBE_LINK_SPEED_5GB_FULL;
-	}
+/**
+ *  ixgbe_get_copper_link_capabilities_generic - Determines link capabilities
+ *  @hw: pointer to hardware structure
+ *  @speed: pointer to link speed
+ *  @autoneg: boolean auto-negotiation value
+ **/
+s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
+					       ixgbe_link_speed *speed,
+					       bool *autoneg)
+{
+	s32 status = IXGBE_SUCCESS;
+
+	DEBUGFUNC("ixgbe_get_copper_link_capabilities_generic");
+
+	*autoneg = true;
+	if (!hw->phy.speeds_supported)
+		status = ixgbe_get_copper_speeds_supported(hw);
 
+	*speed = hw->phy.speeds_supported;
 	return status;
 }
 
diff --git a/drivers/net/ixgbe/base/ixgbe_type.h b/drivers/net/ixgbe/base/ixgbe_type.h
index 881f34c..890e572 100644
--- a/drivers/net/ixgbe/base/ixgbe_type.h
+++ b/drivers/net/ixgbe/base/ixgbe_type.h
@@ -3845,6 +3845,7 @@ struct ixgbe_phy_info {
 	u32 phy_semaphore_mask;
 	bool reset_disable;
 	ixgbe_autoneg_advertised autoneg_advertised;
+	ixgbe_link_speed speeds_supported;
 	enum ixgbe_smart_speed smart_speed;
 	bool smart_speed_active;
 	bool multispeed_fiber;
-- 
1.9.3