[dpdk-dev] Mellanox dpdk issues

Sotiris Salloumis sotiris.salloumis at ericsson.com
Fri Nov 20 18:34:45 CET 2015


Hi all,

I'm trying to build DPDK for Mellanox ( using MLNX_DPDK-2.1_1.1 ) but I get the following error following the guidelines i.e. make install T=x86_64-native-linuxapp-gcc

== Build lib/librte_eal/linuxapp/igb_uio
make[8]: *** /lib/modules/3.12.28-4-default/build: No such file or directory.  Stop.
/root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.module.mk:79: recipe for target 'igb_uio.ko' failed
make[7]: *** [igb_uio.ko] Error 2
/root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.subdir.mk:61: recipe for target 'igb_uio' failed
make[6]: *** [igb_uio] Error 2
/root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.subdir.mk:61: recipe for target 'linuxapp' failed
make[5]: *** [linuxapp] Error 2
/root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.subdir.mk:61: recipe for target 'librte_eal' failed
make[4]: *** [librte_eal] Error 2
/root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.sdkbuild.mk:93: recipe for target 'lib' failed
make[3]: *** [lib] Error 2
/root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.sdkroot.mk:124: recipe for target 'all' failed
make[2]: *** [all] Error 2
/root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.sdkinstall.mk:58: recipe for target 'x86_64-native-linuxapp-gcc_install' failed
make[1]: *** [x86_64-native-linuxapp-gcc_install] Error 2
/root/Downloads/MLNX_DPDK-2.1_1.1/mk/rte.sdkroot.mk:102: recipe for target 'install' failed
make: *** [install] Error 2

The environment is SLES12


-          Linux linux-okj7 3.12.28-4-default #1 SMP Thu Sep 25 17:02:34 UTC 2014 (9879bd4) x86_64 x86_64 x86_64 GNU/Linux

-          3.12.28-4-default

>From Mellanox point of view the only difference I see is related with firmware version

---- Performing Adapter Device Self Test ----
Number of CAs Detected ................. 1
PCI Device Check ....................... PASS
Kernel Arch ............................ x86_64
Host Driver Version .................... MLNX_OFED_LINUX-3.1-1.0.3 (OFED-3.1-1.0.3): 3.12.28-4-default
Host Driver RPM Check .................. PASS
Firmware on CA #0 NIC .................. v2.35.5130
Firmware Check on CA #0 (NIC) .......... PASS
    NOTE: The found fw version is higher than the fw included in this package (v2.35.5100)
Host Driver Initialization ............. PASS
Number of CA Ports Active .............. 2
Port State of Port #1 on CA #0 (NIC)..... UP 1X QDR (Ethernet)
Port State of Port #2 on CA #0 (NIC)..... UP 1X QDR (Ethernet)
Error Counter Check on CA #0 (NIC)...... NA (Eth ports)
Kernel Syslog Check .................... PASS
Node GUID on CA #0 (NIC) ............... a0:1d:48:03:00:b5:a6:17
------------------ DONE ---------------------

Any hints?

Thanks
Sotiris



More information about the dev mailing list