[dpdk-dev] [PATCH v3 04/11] doc: Add BNX2X PMD documentationdoc: Add BNX2X PMD documentation

Rasesh Mody rasesh.mody at qlogic.com
Tue Nov 24 08:44:29 CET 2015


Signed-off-by: Harish Patil <harish.patil at qlogic.com>
Signed-off-by: Rasesh Mody <rasesh.mody at qlogic.com>
---
 doc/guides/nics/bnx2x.rst |  314 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 314 insertions(+)
 create mode 100644 doc/guides/nics/bnx2x.rst

diff --git a/doc/guides/nics/bnx2x.rst b/doc/guides/nics/bnx2x.rst
new file mode 100644
index 0000000..7a94080
--- /dev/null
+++ b/doc/guides/nics/bnx2x.rst
@@ -0,0 +1,314 @@
+..  BSD LICENSE
+    Copyright (c) 2015 QLogic Corporation
+    All rights reserved.
+
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions
+    are met:
+
+    * Redistributions of source code must retain the above copyright
+    notice, this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in
+    the documentation and/or other materials provided with the
+    distribution.
+    * Neither the name of QLogic Corporation nor the names of its
+    contributors may be used to endorse or promote products derived
+    from this software without specific prior written permission.
+
+    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+    "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+    LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+    A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+    OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+    SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+    LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+    DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+    THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+    OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+BNX2X Poll Mode Driver
+======================
+
+The BNX2X poll mode driver library (**librte_pmd_bnx2x**) implements support
+for **QLogic 578xx** 10/20 Gbps family of adapters as well as their virtual
+functions (VF) in SR-IOV context. It is supported on several standard Linux
+distros like Red Hat 7.x and SLES12 OS. It is compile-tested under FreeBSD OS.
+
+More information can be found at `QLogic Corporation's Official Website
+<http://www.qlogic.com>`_.
+
+Supported Features
+------------------
+
+BNX2X PMD has support for:
+
+- Base L2 features
+- Unicast/multicast filtering
+- Promiscuous mode
+- Port hardware statistics
+- SR-IOV VF
+
+Non-supported Features
+----------------------
+
+The features not yet supported include:
+
+- TSS (Transmit Side Scaling)
+- RSS (Receive Side Scaling)
+- LRO/TSO offload
+- Checksum offload
+- SR-IOV PF
+
+Co-existence considerations
+---------------------------
+
+- BCM578xx being a CNA can have both NIC and Storage personalities.
+  However, coexistence with storage protocol drivers (cnic, bnx2fc and
+  bnx2fi) is not supported on the same adapter. So storage personality
+  has to be disabled on that adapter when used in DPDK applications.
+
+- For SR-IOV case, bnx2x PMD will be used to bind to SR-IOV VF device and
+  Linux native kernel driver (bnx2x) will be attached to SR-IOV PF.
+
+
+Supported QLogic NICs
+---------------------
+
+- 578xx
+
+Prerequisites
+-------------
+
+- Requires firmware version **7.2.51.0**. It is inbox on most of the
+  standard Linux distros. If it is not available visit
+  `QLogic Driver Download Center <http://driverdownloads.qlogic.com>`_
+  to get the required firmware.
+
+Pre-Installation Configuration
+------------------------------
+
+Config File Options
+~~~~~~~~~~~~~~~~~~~
+
+The following options can be modified in the ``.config`` file. Please note that
+enabling debugging options may affect system performance.
+
+- ``CONFIG_RTE_LIBRTE_BNX2X_PMD`` (default **y**)
+
+  Toggle compilation of bnx2x driver.
+
+- ``CONFIG_RTE_LIBRTE_BNX2X_DEBUG`` (default **n**)
+
+  Toggle display of generic debugging messages.
+
+- ``CONFIG_RTE_LIBRTE_BNX2X_DEBUG_INIT`` (default **n**)
+
+  Toggle display of initialization related messages.
+
+- ``CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX`` (default **n**)
+
+  Toggle display of transmit fast path run-time messages.
+
+- ``CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX`` (default **n**)
+
+  Toggle display of receive fast path run-time messages.
+
+- ``CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC`` (default **n**)
+
+  Toggle display of register reads and writes.
+
+
+.. _bnx2x_driver-compilation:
+
+Driver Compilation
+~~~~~~~~~~~~~~~~~~
+
+BNX2X PMD for Linux x86_64 gcc target, run the following "make"
+command::
+
+   cd <DPDK-source-directory>
+   make config T=x86_64-native-linuxapp-gcc install
+
+To compile BNX2X PMD for Linux x86_64 clang target, run the following "make"
+command::
+
+   cd <DPDK-source-directory>
+   make config T=x86_64-native-linuxapp-clang install
+
+To compile BNX2X PMD for Linux i686 gcc target, run the following "make"
+command::
+
+   cd <DPDK-source-directory>
+   make config T=i686-native-linuxapp-gcc install
+
+To compile BNX2X PMD for FreeBSD x86_64 clang target, run the following "gmake"
+command::
+
+   cd <DPDK-source-directory>
+   gmake config T=x86_64-native-bsdapp-clang install
+
+To compile BNX2X PMD for FreeBSD x86_64 gcc target, run the following "gmake"
+command::
+
+   cd <DPDK-source-directory>
+   gmake config T=x86_64-native-bsdapp-gcc install -Wl,-rpath=/usr/local/lib/gcc48 CC=gcc48
+
+Linux
+-----
+
+.. _bnx2x_Linux-installation:
+
+Linux Installation
+~~~~~~~~~~~~~~~~~~
+
+Sample Application Notes
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+This section demonstrates how to launch ``testpmd`` with QLogic 578xx
+devices managed by ``librte_pmd_bnx2x`` in Linux operating system.
+
+#. Request huge pages:
+
+   .. code-block:: console
+
+      echo 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages/nr_hugepages
+
+#. Load ``igb_uio`` or ``vfio-pci`` driver:
+
+   .. code-block:: console
+
+      insmod ./x86_64-native-linuxapp-gcc/kmod/igb_uio.ko
+
+   or
+
+   .. code-block:: console
+
+      modprobe vfio-pci
+
+#. Bind the QLogic adapters to ``igb_uio`` or ``vfio-pci`` loaded in the
+   previous step::
+
+      ./tools/dpdk_nic_bind.py --bind igb_uio 0000:84:00.0 0000:84:00.1
+
+   or
+
+   Setup VFIO permissions for regular users and then bind to ``vfio-pci``:
+
+   .. code-block:: console
+
+      sudo chmod a+x /dev/vfio
+
+      sudo chmod 0666 /dev/vfio/*
+
+      ./tools/dpdk_nic_bind.py --bind vfio-pci 0000:84:00.0 0000:84:00.1
+
+#. Start ``testpmd`` with basic parameters:
+
+   .. code-block:: console
+
+      ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -- -i
+
+   Example output:
+
+   .. code-block:: console
+
+      [...]
+      EAL: PCI device 0000:84:00.0 on NUMA socket 1
+      EAL:   probe driver: 14e4:168e rte_bnx2x_pmd
+      EAL:   PCI memory mapped at 0x7f14f6fe5000
+      EAL:   PCI memory mapped at 0x7f14f67e5000
+      EAL:   PCI memory mapped at 0x7f15fbd9b000
+      EAL: PCI device 0000:84:00.1 on NUMA socket 1
+      EAL:   probe driver: 14e4:168e rte_bnx2x_pmd
+      EAL:   PCI memory mapped at 0x7f14f5fe5000
+      EAL:   PCI memory mapped at 0x7f14f57e5000
+      EAL:   PCI memory mapped at 0x7f15fbd4f000
+      Interactive-mode selected
+      Configuring Port 0 (socket 0)
+      PMD: bnx2x_dev_tx_queue_setup(): fp[00] req_bd=512, thresh=512,
+                   usable_bd=1020, total_bd=1024,
+                                tx_pages=4
+      PMD: bnx2x_dev_rx_queue_setup(): fp[00] req_bd=128, thresh=0,
+                   usable_bd=510, total_bd=512,
+                                rx_pages=1, cq_pages=8
+      PMD: bnx2x_print_adapter_info():
+      [...]
+      Checking link statuses...
+      Port 0 Link Up - speed 10000 Mbps - full-duplex
+      Port 1 Link Up - speed 10000 Mbps - full-duplex
+      Done
+      testpmd>
+
+SR-IOV: Prerequisites and sample Application Notes
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+This section provides instructions to configure SR-IOV with Linux OS.
+
+#. Verify SR-IOV and ARI capabilities are enabled on the adapter using ``lspci``:
+
+   .. code-block:: console
+
+      lspci -s <slot> -vvv
+
+   Example output:
+
+   .. code-block:: console
+
+      [...]
+      Capabilities: [1b8 v1] Alternative Routing-ID Interpretation (ARI)
+      [...]
+      Capabilities: [1c0 v1] Single Root I/O Virtualization (SR-IOV)
+      [...]
+      Kernel driver in use: igb_uio
+
+#. Load the kernel module:
+
+   .. code-block:: console
+
+      modprobe bnx2x
+
+   Example output:
+
+   .. code-block:: console
+
+      systemd-udevd[4848]: renamed network interface eth0 to ens5f0
+      systemd-udevd[4848]: renamed network interface eth1 to ens5f1
+
+#. Bring up the PF ports:
+
+   .. code-block:: console
+
+      ifconfig ens5f0 up
+      ifconfig ens5f1 up
+
+#. Create VF device(s):
+
+   Echo the number of VFs to be created into "sriov_numvfs" sysfs entry
+   of the parent PF.
+
+   Example output:
+
+   .. code-block:: console
+
+      echo 2 > /sys/devices/pci0000:00/0000:00:03.0/0000:81:00.0/sriov_numvfs
+
+
+#. Assign VF MAC address:
+
+   Assign MAC address to the VF using iproute2 ulility. The syntax is:
+   ip link set <PF iface> vf <VF id> mac <macaddr>
+
+   Example output:
+
+   .. code-block:: console
+
+      ip link set ens5f0 vf 0 mac 52:54:00:2f:9d:e8
+
+
+#. PCI passthrough:
+
+   The VF devices may be passed through to the guest VM using virt-manager or
+   virsh etc. bnx2x PMD should be used to bind the VF devices in the guest VM
+   using the instructions outlined in the Application notes below.
-- 
1.7.10.3



More information about the dev mailing list