[dpdk-dev] [PATCH 1/3] fm10k: add multi-queue checking

He, Shaopeng shaopeng.he at intel.com
Thu Oct 15 13:07:40 CEST 2015


Hi, Michael

> -----Original Message-----
> From: Qiu, Michael
> Sent: Thursday, October 15, 2015 2:28 PM
> To: He, Shaopeng; dev at dpdk.org
> Subject: Re: [dpdk-dev] [PATCH 1/3] fm10k: add multi-queue checking
> 
> On 2015/9/30 15:29, Shaopeng He wrote:
> > Add multi-queue checking in device configure process.
> > Currently, VMDQ and RSS are supported.
> >
> > Signed-off-by: Shaopeng He <shaopeng.he at intel.com>
> > ---
> >  drivers/net/fm10k/fm10k_ethdev.c | 44
> > ++++++++++++++++++++++++++++++++++++++++
> >  1 file changed, 44 insertions(+)
> >
> > diff --git a/drivers/net/fm10k/fm10k_ethdev.c
> > b/drivers/net/fm10k/fm10k_ethdev.c
> > index a69c990..082937d 100644
> > --- a/drivers/net/fm10k/fm10k_ethdev.c
> > +++ b/drivers/net/fm10k/fm10k_ethdev.c
> > @@ -283,12 +283,56 @@ tx_queue_disable(struct fm10k_hw *hw,
> uint16_t
> > qnum)  }
> >
> >  static int
> > +fm10k_check_mq_mode(struct rte_eth_dev *dev) {
> > +	enum rte_eth_rx_mq_mode rx_mq_mode = dev->data-
> >dev_conf.rxmode.mq_mode;
> > +	struct fm10k_hw *hw = FM10K_DEV_PRIVATE_TO_HW(dev->data-
> >dev_private);
> > +	struct rte_eth_vmdq_rx_conf *vmdq_conf;
> > +	uint16_t nb_rx_q = dev->data->nb_rx_queues;
> > +
> > +	vmdq_conf = &dev->data->dev_conf.rx_adv_conf.vmdq_rx_conf;
> > +
> > +	if (rx_mq_mode & ETH_MQ_RX_DCB_FLAG) {
> > +		PMD_INIT_LOG(ERR, "DCB mode is not supported.");
> > +		return -EINVAL;
> > +	}
> > +
> > +	if (!(rx_mq_mode & ETH_MQ_RX_VMDQ_FLAG))
> > +		return 0;
> > +
> > +	if (hw->mac.type == fm10k_mac_vf) {
> > +		PMD_INIT_LOG(ERR, "VMDQ mode is not supported in VF.");
> > +		return -EINVAL;
> > +	}
> 
> I think vf check should be the first one, then we do not need check dcb and
> VMDq flag.
> 
> Thanks,
> Michael

Thanks for the comments. There is a case of RSS support on VF, if vf check be 
the first one, it will return fail, which is not correct.

Thanks,
--Shaopeng
> > +
> > +	/* Check VMDQ queue pool number */
> > +	if (vmdq_conf->nb_queue_pools >
> > +			sizeof(vmdq_conf->pool_map[0].pools) * CHAR_BIT
> ||
> > +			vmdq_conf->nb_queue_pools > nb_rx_q) {
> > +		PMD_INIT_LOG(ERR, "Too many of queue pools: %d",
> > +			vmdq_conf->nb_queue_pools);
> > +		return -EINVAL;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static int
> >  fm10k_dev_configure(struct rte_eth_dev *dev)  {
> > +	int ret;
> > +
> >  	PMD_INIT_FUNC_TRACE();
> >
> >  	if (dev->data->dev_conf.rxmode.hw_strip_crc == 0)
> >  		PMD_INIT_LOG(WARNING, "fm10k always strip CRC");
> > +	/* multipe queue mode checking */
> > +	ret  = fm10k_check_mq_mode(dev);
> > +	if (ret != 0) {
> > +		PMD_DRV_LOG(ERR, "fm10k_check_mq_mode fails
> with %d.",
> > +			    ret);
> > +		return ret;
> > +	}
> >
> >  	return 0;
> >  }



More information about the dev mailing list