[dpdk-dev] [PATCH v3 29/36] e1000/base: implement 88E1543 PHY initialization

Wenzhuo Lu wenzhuo.lu at intel.com
Fri Oct 16 04:51:15 CEST 2015


The initializtion process for 88E1543 PHY.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu at intel.com>
---
 drivers/net/e1000/base/e1000_82575.c   | 106 ++++++++++++++++++++++++++++++++-
 drivers/net/e1000/base/e1000_82575.h   |   1 +
 drivers/net/e1000/base/e1000_defines.h |   1 +
 3 files changed, 107 insertions(+), 1 deletion(-)

diff --git a/drivers/net/e1000/base/e1000_82575.c b/drivers/net/e1000/base/e1000_82575.c
index 4374eab..723885d 100644
--- a/drivers/net/e1000/base/e1000_82575.c
+++ b/drivers/net/e1000/base/e1000_82575.c
@@ -277,6 +277,11 @@ STATIC s32 e1000_init_phy_params_82575(struct e1000_hw *hw)
 			if (ret_val)
 				goto out;
 		}
+		if (phy->id == M88E1543_E_PHY_ID) {
+			ret_val = e1000_initialize_M88E1543_phy(hw);
+			if (ret_val)
+				goto out;
+		}
 		break;
 	case IGP03E1000_E_PHY_ID:
 	case IGP04E1000_E_PHY_ID:
@@ -2817,7 +2822,7 @@ s32 e1000_read_emi_reg(struct e1000_hw *hw, u16 addr, u16 *data)
  *  e1000_initialize_M88E1512_phy - Initialize M88E1512 PHY
  *  @hw: pointer to the HW structure
  *
- *  Initialize Marverl 1512 to work correctly with Avoton.
+ *  Initialize Marvell 1512 to work correctly with Avoton.
  **/
 s32 e1000_initialize_M88E1512_phy(struct e1000_hw *hw)
 {
@@ -2903,6 +2908,105 @@ out:
 }
 
 /**
+ *  e1000_initialize_M88E1543_phy - Initialize M88E1543 PHY
+ *  @hw: pointer to the HW structure
+ *
+ *  Initialize Marvell 1543 to work correctly with Avoton.
+ **/
+s32 e1000_initialize_M88E1543_phy(struct e1000_hw *hw)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	s32 ret_val = E1000_SUCCESS;
+
+	DEBUGFUNC("e1000_initialize_M88E1543_phy");
+
+	/* Check if this is correct PHY. */
+	if (phy->id != M88E1543_E_PHY_ID)
+		goto out;
+
+	/* Switch to PHY page 0xFF. */
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x00FF);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0x214B);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2144);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0x0C28);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2146);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0xB233);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x214D);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0xDC0C);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2159);
+	if (ret_val)
+		goto out;
+
+	/* Switch to PHY page 0xFB. */
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x00FB);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_3, 0xC00D);
+	if (ret_val)
+		goto out;
+
+	/* Switch to PHY page 0x12. */
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x12);
+	if (ret_val)
+		goto out;
+
+	/* Change mode to SGMII-to-Copper */
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1512_MODE, 0x8001);
+	if (ret_val)
+		goto out;
+
+	/* Switch to PHY page 1. */
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x1);
+	if (ret_val)
+		goto out;
+
+	/* Change mode to 1000BASE-X/SGMII and autoneg enable; reset */
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1543_FIBER_CTRL, 0x9140);
+	if (ret_val)
+		goto out;
+
+	/* Return the PHY to page 0. */
+	ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0);
+	if (ret_val)
+		goto out;
+
+	ret_val = phy->ops.commit(hw);
+	if (ret_val) {
+		DEBUGOUT("Error committing the PHY changes\n");
+		return ret_val;
+	}
+
+	msec_delay(1000);
+out:
+	return ret_val;
+}
+
+/**
  *  e1000_set_eee_i350 - Enable/disable EEE support
  *  @hw: pointer to the HW structure
  *  @adv1g: boolean flag enabling 1G EEE advertisement
diff --git a/drivers/net/e1000/base/e1000_82575.h b/drivers/net/e1000/base/e1000_82575.h
index 7a46ceb..c498684 100644
--- a/drivers/net/e1000/base/e1000_82575.h
+++ b/drivers/net/e1000/base/e1000_82575.h
@@ -498,6 +498,7 @@ s32 e1000_set_eee_i350(struct e1000_hw *hw, bool adv1G, bool adv100M);
 s32 e1000_set_eee_i354(struct e1000_hw *hw, bool adv1G, bool adv100M);
 s32 e1000_get_eee_status_i354(struct e1000_hw *, bool *);
 s32 e1000_initialize_M88E1512_phy(struct e1000_hw *hw);
+s32 e1000_initialize_M88E1543_phy(struct e1000_hw *hw);
 
 /* I2C SDA and SCL timing parameters for standard mode */
 #define E1000_I2C_T_HD_STA	4
diff --git a/drivers/net/e1000/base/e1000_defines.h b/drivers/net/e1000/base/e1000_defines.h
index 8e40771..69aa1f2 100644
--- a/drivers/net/e1000/base/e1000_defines.h
+++ b/drivers/net/e1000/base/e1000_defines.h
@@ -847,6 +847,7 @@ POSSIBILITY OF SUCH DAMAGE.
 #define E1000_M88E1543_PAGE_ADDR	0x16       /* Page Offset Register */
 #define E1000_M88E1543_EEE_CTRL_1	0x0
 #define E1000_M88E1543_EEE_CTRL_1_MS	0x0001     /* EEE Master/Slave */
+#define E1000_M88E1543_FIBER_CTRL	0x0        /* Fiber Control Register */
 #define E1000_EEE_ADV_DEV_I354		7
 #define E1000_EEE_ADV_ADDR_I354		60
 #define E1000_EEE_ADV_100_SUPPORTED	(1 << 1)   /* 100BaseTx EEE Supported */
-- 
1.9.3



More information about the dev mailing list