[dpdk-dev] [PATCH v3 00/36] update e1000 base code

[Thomas Monjalon]

2015-10-16 10:50, Wenzhuo Lu:
> Wenzhuo Lu (36):
>   e1000/base: update readme and copyright
>   e1000/base: add new devices
>   e1000/base: fix issue with link flap on 82579
>   e1000/base: fix issue with jumbo frame CRC failures in client
>   e1000/base: redundant PHY power down for i210
>   e1000/base: add return value to the functions of setting receive
>     address register
>   e1000/base: add defaults for i210 TX/RX PBSIZE
>   e1000/base: remove E1000_WRITE_FLUSH for DH89XXCC_SGMII after
>     commencing HW reset
>   e1000/base: add evaluation of e1000_nvm_read return value
>   e1000/base: change invariant return to not use variables
>   e1000/base: add return value handler when check manage mode
>   e1000/base: add return value handler for ESB2 controller init and
>     reset
>   e1000/base: add support for inverted format ETrackId
>   e1000/base: add EEARBC_I210 for i210
>   e1000/base: apply paranoia to macro arguments
>   e1000/base: add flags to set eee advertisement modes
>   e1000/base: prevent ulp flow if cable connected
>   e1000/base: fix TIPG value for non 10 half duplex mode
>   e1000/base: add return value for resume workaround
>   e1000/base: fix link detect flow
>   e1000/base: cleanup NAHUM6LP_HW tags
>   e1000/base: add bit for disable packetbuffer read
>   e1000/base: K1 flow fixes
>   e1000/base: remove FIXME comment
>   e1000/base: set correct value of beacon duration
>   e1000/base: disable extension header parsing for IPv6
>   e1000/base: fix for i354 88E1112 PHY using AutoMedia Detect
>   e1000/base: increase timeout of polling bit RSPCIPHY in
>     check_reset_block
>   e1000/base: implement 88E1543 PHY initialization
>   e1000/base: use the correct i210 register for EEMNGCTL
>   e1000/base: move the print to the right position
>   e1000/base: synchronization of MAC-PHY interface only on non- ME
>     systems
>   e1000/base: fix to enable both ulp and EEE in Sx state
>   e1000/base: some minor change
>   e1000: add new devices
>   doc: update release notes for e1000 base code update

Applied without the release notes patch which is not ready.
The git titles have been reworded to be easier to read and understand.
It may help to reword the release notes.
Thanks