[dpdk-dev] [PATCH v2 10/13] mlx5: add flow control device operations
Adrien Mazarguil
adrien.mazarguil at 6wind.com
Fri Oct 30 19:52:39 CET 2015
Like most other device control operations, those are handled by the related
kernel network device through syscalls.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil at 6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro at 6wind.com>
---
drivers/net/mlx5/mlx5.c | 2 +
drivers/net/mlx5/mlx5.h | 2 +
drivers/net/mlx5/mlx5_ethdev.c | 99 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 103 insertions(+)
diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
index 5ed828d..c454e93 100644
--- a/drivers/net/mlx5/mlx5.c
+++ b/drivers/net/mlx5/mlx5.c
@@ -145,6 +145,8 @@ static const struct eth_dev_ops mlx5_dev_ops = {
.tx_queue_setup = mlx5_tx_queue_setup,
.rx_queue_release = mlx5_rx_queue_release,
.tx_queue_release = mlx5_tx_queue_release,
+ .flow_ctrl_get = mlx5_dev_get_flow_ctrl,
+ .flow_ctrl_set = mlx5_dev_set_flow_ctrl,
.mac_addr_remove = mlx5_mac_addr_remove,
.mac_addr_add = mlx5_mac_addr_add,
.mtu_set = mlx5_dev_set_mtu,
diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h
index 1a18326..c6c3d3f 100644
--- a/drivers/net/mlx5/mlx5.h
+++ b/drivers/net/mlx5/mlx5.h
@@ -166,6 +166,8 @@ int mlx5_dev_configure(struct rte_eth_dev *);
void mlx5_dev_infos_get(struct rte_eth_dev *, struct rte_eth_dev_info *);
int mlx5_link_update(struct rte_eth_dev *, int);
int mlx5_dev_set_mtu(struct rte_eth_dev *, uint16_t);
+int mlx5_dev_get_flow_ctrl(struct rte_eth_dev *, struct rte_eth_fc_conf *);
+int mlx5_dev_set_flow_ctrl(struct rte_eth_dev *, struct rte_eth_fc_conf *);
int mlx5_ibv_device_to_pci_addr(const struct ibv_device *,
struct rte_pci_addr *);
diff --git a/drivers/net/mlx5/mlx5_ethdev.c b/drivers/net/mlx5/mlx5_ethdev.c
index d01dee5..5df5fa1 100644
--- a/drivers/net/mlx5/mlx5_ethdev.c
+++ b/drivers/net/mlx5/mlx5_ethdev.c
@@ -695,6 +695,105 @@ out:
}
/**
+ * DPDK callback to get flow control status.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param[out] fc_conf
+ * Flow control output buffer.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+int
+mlx5_dev_get_flow_ctrl(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
+{
+ struct priv *priv = dev->data->dev_private;
+ struct ifreq ifr;
+ struct ethtool_pauseparam ethpause = {
+ .cmd = ETHTOOL_GPAUSEPARAM
+ };
+ int ret;
+
+ ifr.ifr_data = ðpause;
+ priv_lock(priv);
+ if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
+ ret = errno;
+ WARN("ioctl(SIOCETHTOOL, ETHTOOL_GPAUSEPARAM)"
+ " failed: %s",
+ strerror(ret));
+ goto out;
+ }
+
+ fc_conf->autoneg = ethpause.autoneg;
+ if (ethpause.rx_pause && ethpause.tx_pause)
+ fc_conf->mode = RTE_FC_FULL;
+ else if (ethpause.rx_pause)
+ fc_conf->mode = RTE_FC_RX_PAUSE;
+ else if (ethpause.tx_pause)
+ fc_conf->mode = RTE_FC_TX_PAUSE;
+ else
+ fc_conf->mode = RTE_FC_NONE;
+ ret = 0;
+
+out:
+ priv_unlock(priv);
+ assert(ret >= 0);
+ return -ret;
+}
+
+/**
+ * DPDK callback to modify flow control parameters.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param[in] fc_conf
+ * Flow control parameters.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+int
+mlx5_dev_set_flow_ctrl(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
+{
+ struct priv *priv = dev->data->dev_private;
+ struct ifreq ifr;
+ struct ethtool_pauseparam ethpause = {
+ .cmd = ETHTOOL_SPAUSEPARAM
+ };
+ int ret;
+
+ ifr.ifr_data = ðpause;
+ ethpause.autoneg = fc_conf->autoneg;
+ if (((fc_conf->mode & RTE_FC_FULL) == RTE_FC_FULL) ||
+ (fc_conf->mode & RTE_FC_RX_PAUSE))
+ ethpause.rx_pause = 1;
+ else
+ ethpause.rx_pause = 0;
+
+ if (((fc_conf->mode & RTE_FC_FULL) == RTE_FC_FULL) ||
+ (fc_conf->mode & RTE_FC_TX_PAUSE))
+ ethpause.tx_pause = 1;
+ else
+ ethpause.tx_pause = 0;
+
+ priv_lock(priv);
+ if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
+ ret = errno;
+ WARN("ioctl(SIOCETHTOOL, ETHTOOL_SPAUSEPARAM)"
+ " failed: %s",
+ strerror(ret));
+ goto out;
+ }
+ ret = 0;
+
+out:
+ priv_unlock(priv);
+ assert(ret >= 0);
+ return -ret;
+}
+
+/**
* Get PCI information from struct ibv_device.
*
* @param device
--
2.1.0
More information about the dev
mailing list