[dpdk-dev] [PATCH 00/39] net/ixgbe: base code update

Xiao Wang xiao.w.wang at intel.com
Sat Aug 27 17:47:43 CEST 2016


     Update ixgbe base driver, including the following changes:

     * add X550em_a 10G PHY support
     * add VF multicast promiscuous mode support
     * support flow control auto negotiation for X550em_a 1G PHY
     * add X550em_a FW ALEF support
	 * some functional fixes

Xiao Wang (39):
  net/ixgbe/base: fix delta check for setting VFTA
  net/ixgbe/base: remove X550em SFP iXFI setup
  net/ixgbe/base: change endianness of PHY data
  net/ixgbe/base: add X550em_a 10G PHY support
  net/ixgbe/base: support VF multicast promiscuous
  net/ixgbe/base: introduce new ops init functions
  net/ixgbe/base: separate PHY probe code
  net/ixgbe/base: fully initialize X550em_a 1G PHYs
  net/ixgbe/base: add macros for VF promiscuous mode
  net/ixgbe/base: add FC setup for X550em_a fiber
  net/ixgbe/base: add FC autoneg for X550em_a fiber
  net/ixgbe/base: clear page register in error path
  net/ixgbe/base: configure DMAC for 10Mb operation
  net/ixgbe/base: fix function comments about X550
  net/ixgbe/base: report setting LPE register error
  net/ixgbe/base: bump mailbox version
  net/ixgbe/base: access IOSF by host interface
  net/ixgbe/base: fix check on NACK
  net/ixgbe/base: define X550 PCIe serial MAC addr
  net/ixgbe/base: bypass checking link for crosstalk
  net/ixgbe/base: support X550em_a SGMII FC autoneg
  net/ixgbe/base: add macros for GENEVE UDP port
  net/ixgbe/base: add bound check in LED functions
  net/ixgbe/base: use default check link function
  net/ixgbe/base: set default autoneg speed at reset
  net/ixgbe/base: add missing FDIRSCTPM mask setting
  net/ixgbe/base: commonize mailbox write and read
  net/ixgbe/base: reduce delay for SWFW semaphore
  net/ixgbe/base: report autoneg supported for X550
  net/ixgbe/base: remove X550em_a 100Mbps support
  net/ixgbe/base: unify link speed value
  net/ixgbe/base: separate ops init from PHY init
  net/ixgbe/base: add X550em_a FW ALEF support
  net/ixgbe/base: add two MAC ops for Hyper-V
  net/ixgbe/base: hold semaphore for shadow RAM access
  net/ixgbe/base: update X550em_a backplane speed
  net/ixgbe/base: clean code of flow control autoneg
  net/ixgbe/base: do not skip PHY configuration
  net/ixgbe/base: add base driver update brief

 doc/guides/rel_notes/release_16_11.rst |    8 +
 drivers/net/ixgbe/base/README          |    2 +-
 drivers/net/ixgbe/base/ixgbe_82598.c   |    6 +-
 drivers/net/ixgbe/base/ixgbe_82599.c   |   16 +-
 drivers/net/ixgbe/base/ixgbe_api.c     |   11 +-
 drivers/net/ixgbe/base/ixgbe_api.h     |    2 +
 drivers/net/ixgbe/base/ixgbe_common.c  |  258 +++++--
 drivers/net/ixgbe/base/ixgbe_common.h  |    3 +-
 drivers/net/ixgbe/base/ixgbe_mbx.h     |    7 +-
 drivers/net/ixgbe/base/ixgbe_osdep.h   |    1 +
 drivers/net/ixgbe/base/ixgbe_phy.c     |  100 ++-
 drivers/net/ixgbe/base/ixgbe_phy.h     |   71 +-
 drivers/net/ixgbe/base/ixgbe_type.h    |   73 +-
 drivers/net/ixgbe/base/ixgbe_vf.c      |  103 ++-
 drivers/net/ixgbe/base/ixgbe_vf.h      |    3 +-
 drivers/net/ixgbe/base/ixgbe_x540.c    |   10 +-
 drivers/net/ixgbe/base/ixgbe_x550.c    | 1262 +++++++++++++++++++++-----------
 drivers/net/ixgbe/base/ixgbe_x550.h    |   61 +-
 drivers/net/ixgbe/ixgbe_ethdev.c       |   43 +-
 19 files changed, 1359 insertions(+), 681 deletions(-)

-- 
1.9.3



More information about the dev mailing list