[dpdk-dev] i40evf DPDK init_adminq failed: -53

Saurabh Mishra saurabh.globe at gmail.com
Mon Feb 1 23:44:28 CET 2016


Hi, on KVM system, after doing NVM upgrade to new firmware and I don't
see init_adminq
failed messages.

Thanks,
/Saurabh

On Mon, Feb 1, 2016 at 11:49 AM, Saurabh Mishra <saurabh.globe at gmail.com>
wrote:

> Hi,
>
> So I tried to update the firmware and it says "Update not available" for
> i40e
>
> Intel(R) Ethernet NVM Update Tool
>
> NVMUpdate version 1.25.20.03
>
> Copyright (C) 2013 - 2015 Intel Corporation.
>
>
>
> WARNING: TO AVOID DAMAGE TO YOUR DEVICE, DO NOT EXIT OR REBOOT OR POWER
> OFF THE SYSTEM DURING THIS UPDATE
>
> Inventory in progress. Please wait [|.........]
>
> +
>
>
>
> Num Description                            Device-Id B:D   Adapter Status
>
> === ====================================== ========= =====
> ====================
>
> 01) Intel(R) Ethernet Server Adapter X520- 8086-10FB 130:00 Update not
> available
>
> 02) Intel(R) Ethernet Converged Network Ad 8086-1572 07:00 Update not
> available
>
>
>
> Tool execution completed with the following status: All operations
> completed successfully
>
> Press any key to exit.
>
>
> [root] esxcfg-nics -l
>
> Name    PCI          Driver      Link Speed     Duplex MAC Address
> MTU    Description
>
> vmnic6  0000:07:00.0 i40e        Up   10000Mbps Full   3c:fd:fe:04:11:c0
> 1500   Intel Corporation Ethernet Controller X710 for 10GbE SFP+
>
> vmnic7  0000:07:00.1 i40e        Up   10000Mbps Full   3c:fd:fe:04:11:c2
> 1500   Intel Corporation Ethernet Controller X710 for 10GbE SFP+
>
> vmnic8  0000:82:00.0 ixgbe       Up   10000Mbps Full   00:1b:21:90:f9:f8
> 1500   Intel(R) 82599 10 Gigabit Dual Port Network Connection
>
> [root] ethtool -i vmnic6
>
> driver: i40e
>
> version: 1.3.38
>
> firmware-version: 4.41 0x80001866 16.5.20
>
> bus-info: 0000:07:00.0
>
> On Mon, Feb 1, 2016 at 10:25 AM, Saurabh Mishra <saurabh.globe at gmail.com>
> wrote:
>
>> Hi Michael --
>>
>> What are the steps to upgrade i40e firmware. We are using CentOS7
>>
>> It didn't work with guest VF driver either on ESXi and KVM.
>>
>> Sure. I will blacklist i40evf driver and try it out.
>>
>> Thanks,
>> /Saurabh
>>
>>
>> On Mon, Feb 1, 2016 at 12:16 AM, Qiu, Michael <michael.qiu at intel.com>
>> wrote:
>>
>>> Hi, Saurabh
>>>
>>> It's known issue, to fix this you'd better to upgrade the firmware
>>> version of i40e.
>>>
>>> BTW, will it work in guest with kernel driver?
>>>
>>> If yes, to workaround(somebody reports it does not work for them):
>>> Remove i40e.ko in guest, so that it will not auto-loaded when boot up.
>>>
>>> Hope it works for you.
>>>
>>> Thanks,
>>> Michael
>>>
>>>
>>> On 1/30/2016 4:35 AM, Saurabh Mishra wrote:
>>> > Has anybody seen this before? What's the workaround or fix? We are
>>> using
>>> > dpdk-2.2.0 on KVM centos:
>>> >
>>> > Host PF version: 1.0.11-k on Centos7
>>> >
>>> >
>>> > [root@ ~]# ./symmetric_mp fakeelf -c 2 -m2048 -n4 --proc-type=primary
>>> -- -p
>>> > 3 --num-procs=2 --proc-id=0
>>> >
>>> > [.]
>>> >
>>> > EAL: Virtual area found at 0x7fff75800000 (size = 0x200000)
>>> >
>>> > EAL: Requesting 1024 pages of size 2MB from socket 0
>>> >
>>> > EAL: TSC frequency is ~2600141 KHz
>>> >
>>> > EAL: WARNING: cpu flags constant_tsc=yes nonstop_tsc=no -> using
>>> unreliable
>>> > clock cycles !
>>> >
>>> > EAL: Master lcore 1 is ready (tid=f7fed880;cpuset=[1])
>>> >
>>> > EAL: PCI device 0000:00:04.0 on NUMA socket 0
>>> >
>>> > EAL:   probe driver: 8086:154c rte_i40evf_pmd
>>> >
>>> > EAL:   PCI memory mapped at 0x7ffff6200000
>>> >
>>> > EAL:   PCI memory mapped at 0x7ffff6210000
>>> >
>>> > EAL: PCI device 0000:00:05.0 on NUMA socket 0
>>> >
>>> > EAL:   probe driver: 8086:154c rte_i40evf_pmd
>>> >
>>> > EAL:   PCI memory mapped at 0x7ffff6214000
>>> >
>>> > EAL:   PCI memory mapped at 0x7ffff6224000
>>> >
>>> > PMD: i40evf_init_vf(): init_adminq failed: -53
>>> >
>>> > PMD: i40evf_dev_init(): Init vf failed
>>> >
>>> > EAL: Error - exiting with code: 1
>>> >
>>> >   Cause: Requested device 0000:00:05.0 cannot be used
>>> >
>>> > [root at PA-VM ~]# ./dpdk-2.2.0/tools/dpdk_nic_bind.py --status
>>> >
>>> >
>>> > Network devices using DPDK-compatible driver
>>> >
>>> > ============================================
>>> >
>>> > 0000:00:04.0 'Device 154c' drv=igb_uio unused=uio_pci_generic
>>> >
>>> > 0000:00:05.0 'Device 154c' drv=igb_uio unused=uio_pci_generic
>>> >
>>> >
>>> > Network devices using kernel driver
>>> >
>>> > ===================================
>>> >
>>> > 0000:00:03.0 'RTL-8139/8139C/8139C+' if=eth0 drv=8139cp
>>> > unused=igb_uio,uio_pci_generic *Active*
>>> >
>>> >
>>> > Other network devices
>>> >
>>> > =====================
>>> >
>>> > <none>
>>> >
>>> > [root@ ~]#
>>> >
>>> >
>>> >
>>> > 04:00.0 *Ether*net controller: Intel Corporation *Ether*net Controller
>>> X710
>>> > for 10GbE SFP+ (rev 01)
>>> >
>>> > 04:00.1 *Ether*net controller: Intel Corporation *Ether*net Controller
>>> X710
>>> > for 10GbE SFP+ (rev 01)
>>> >
>>> > 04:02.0 *Ether*net controller: Intel Corporation XL710/X710 Virtual
>>> > Function (rev 01)
>>> >
>>> > 04:02.1 *Ether*net controller: Intel Corporation XL710/X710 Virtual
>>> > Function (rev 01)
>>> >
>>> > 04:0a.0 *Ether*net controller: Intel Corporation XL710/X710 Virtual
>>> > Function (rev 01)
>>> >
>>> > 04:0a.1 *Ether*net controller: Intel Corporation XL710/X710 Virtual
>>> > Function (rev 01)
>>> >
>>> >
>>> >
>>> > [root at oscompute3 ~]# dmesg | tail
>>> >
>>> > [2064188.042835] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command
>>> 15
>>> > pending
>>> >
>>> > [2064188.062836] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command
>>> 15
>>> > pending
>>> >
>>> > [2064188.082862] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command
>>> 15
>>> > pending
>>> >
>>> > [2064188.102838] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command
>>> 15
>>> > pending
>>> >
>>> > [2064188.122850] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command
>>> 15
>>> > pending
>>> >
>>> > [2064188.142852] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command
>>> 15
>>> > pending
>>> >
>>> > [2064188.162850] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command
>>> 15
>>> > pending
>>> >
>>> > [2064188.182845] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command
>>> 15
>>> > pending
>>> >
>>> > [2064188.202845] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command
>>> 15
>>> > pending
>>> >
>>> > [2064188.222858] i40evf 0000:04:0a.1: i40evf_add_ether_addrs: command
>>> 15
>>> > pending
>>> >
>>> > [root at oscompute3 ~]#
>>> >
>>> >
>>> > /Saurabh
>>> >
>>>
>>>
>>
>


More information about the dev mailing list