[dpdk-dev] [PATCH v2 1/3] librte_ether: remove RTE_PROC_PRIMARY_OR_ERR_RET and RTE_PROC_PRIMARY_OR_RET
Reshma Pattan
reshma.pattan at intel.com
Tue Jan 5 11:58:26 CET 2016
Macros RTE_PROC_PRIMARY_OR_ERR_RET and RTE_PROC_PRIMARY_OR_RET
are blocking the secondary process from using the APIs.
API access should be given to both secondary and primary.
Reported-by: Sean Harte <sean.harte at intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan at intel.com>
---
v2:
* Removed checkpatch fixes of lib/librte_ether/rte_ethdev.h from this patch.
lib/librte_ether/rte_ethdev.c | 50 +----------------------------------------
1 files changed, 1 insertions(+), 49 deletions(-)
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index ed971b4..5849102 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -711,10 +711,6 @@ rte_eth_dev_rx_queue_start(uint8_t port_id, uint16_t rx_queue_id)
{
struct rte_eth_dev *dev;
- /* This function is only safe when called from the primary process
- * in a multi-process setup*/
- RTE_PROC_PRIMARY_OR_ERR_RET(-E_RTE_SECONDARY);
-
RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
dev = &rte_eth_devices[port_id];
@@ -741,10 +737,6 @@ rte_eth_dev_rx_queue_stop(uint8_t port_id, uint16_t rx_queue_id)
{
struct rte_eth_dev *dev;
- /* This function is only safe when called from the primary process
- * in a multi-process setup*/
- RTE_PROC_PRIMARY_OR_ERR_RET(-E_RTE_SECONDARY);
-
RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
dev = &rte_eth_devices[port_id];
@@ -771,10 +763,6 @@ rte_eth_dev_tx_queue_start(uint8_t port_id, uint16_t tx_queue_id)
{
struct rte_eth_dev *dev;
- /* This function is only safe when called from the primary process
- * in a multi-process setup*/
- RTE_PROC_PRIMARY_OR_ERR_RET(-E_RTE_SECONDARY);
-
RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
dev = &rte_eth_devices[port_id];
@@ -801,10 +789,6 @@ rte_eth_dev_tx_queue_stop(uint8_t port_id, uint16_t tx_queue_id)
{
struct rte_eth_dev *dev;
- /* This function is only safe when called from the primary process
- * in a multi-process setup*/
- RTE_PROC_PRIMARY_OR_ERR_RET(-E_RTE_SECONDARY);
-
RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
dev = &rte_eth_devices[port_id];
@@ -874,10 +858,6 @@ rte_eth_dev_configure(uint8_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
struct rte_eth_dev_info dev_info;
int diag;
- /* This function is only safe when called from the primary process
- * in a multi-process setup*/
- RTE_PROC_PRIMARY_OR_ERR_RET(-E_RTE_SECONDARY);
-
RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
if (nb_rx_q > RTE_MAX_QUEUES_PER_PORT) {
@@ -1059,10 +1039,6 @@ rte_eth_dev_start(uint8_t port_id)
struct rte_eth_dev *dev;
int diag;
- /* This function is only safe when called from the primary process
- * in a multi-process setup*/
- RTE_PROC_PRIMARY_OR_ERR_RET(-E_RTE_SECONDARY);
-
RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
dev = &rte_eth_devices[port_id];
@@ -1096,10 +1072,6 @@ rte_eth_dev_stop(uint8_t port_id)
{
struct rte_eth_dev *dev;
- /* This function is only safe when called from the primary process
- * in a multi-process setup*/
- RTE_PROC_PRIMARY_OR_RET();
-
RTE_ETH_VALID_PORTID_OR_RET(port_id);
dev = &rte_eth_devices[port_id];
@@ -1121,10 +1093,6 @@ rte_eth_dev_set_link_up(uint8_t port_id)
{
struct rte_eth_dev *dev;
- /* This function is only safe when called from the primary process
- * in a multi-process setup*/
- RTE_PROC_PRIMARY_OR_ERR_RET(-E_RTE_SECONDARY);
-
RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
dev = &rte_eth_devices[port_id];
@@ -1138,10 +1106,6 @@ rte_eth_dev_set_link_down(uint8_t port_id)
{
struct rte_eth_dev *dev;
- /* This function is only safe when called from the primary process
- * in a multi-process setup*/
- RTE_PROC_PRIMARY_OR_ERR_RET(-E_RTE_SECONDARY);
-
RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
dev = &rte_eth_devices[port_id];
@@ -1155,10 +1119,6 @@ rte_eth_dev_close(uint8_t port_id)
{
struct rte_eth_dev *dev;
- /* This function is only safe when called from the primary process
- * in a multi-process setup*/
- RTE_PROC_PRIMARY_OR_RET();
-
RTE_ETH_VALID_PORTID_OR_RET(port_id);
dev = &rte_eth_devices[port_id];
@@ -1183,10 +1143,6 @@ rte_eth_rx_queue_setup(uint8_t port_id, uint16_t rx_queue_id,
struct rte_eth_dev *dev;
struct rte_eth_dev_info dev_info;
- /* This function is only safe when called from the primary process
- * in a multi-process setup*/
- RTE_PROC_PRIMARY_OR_ERR_RET(-E_RTE_SECONDARY);
-
RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
dev = &rte_eth_devices[port_id];
@@ -1266,10 +1222,6 @@ rte_eth_tx_queue_setup(uint8_t port_id, uint16_t tx_queue_id,
struct rte_eth_dev *dev;
struct rte_eth_dev_info dev_info;
- /* This function is only safe when called from the primary process
- * in a multi-process setup*/
- RTE_PROC_PRIMARY_OR_ERR_RET(-E_RTE_SECONDARY);
-
RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
dev = &rte_eth_devices[port_id];
@@ -2479,7 +2431,7 @@ rte_eth_dev_callback_register(uint8_t port_id,
/* create a new callback. */
if (user_cb == NULL)
user_cb = rte_zmalloc("INTR_USER_CALLBACK",
- sizeof(struct rte_eth_dev_callback), 0);
+ sizeof(struct rte_eth_dev_callback), 0);
if (user_cb != NULL) {
user_cb->cb_fn = cb_fn;
user_cb->cb_arg = cb_arg;
--
1.7.4.1
More information about the dev
mailing list