[dpdk-dev] [PATCH] doc : update guide and release notes for mlx5
Olga Shern
olgas at mellanox.com
Tue Jul 26 18:29:08 CEST 2016
Signed-off-by: Olga Shern <olgas at mellanox.com>
---
doc/guides/nics/mlx5.rst | 7 ++++++-
doc/guides/rel_notes/release_16_07.rst | 16 +++++++++++++++-
2 files changed, 21 insertions(+), 2 deletions(-)
diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
index 063c4a5..1bcb818 100644
--- a/doc/guides/nics/mlx5.rst
+++ b/doc/guides/nics/mlx5.rst
@@ -154,6 +154,11 @@ Run-time configuration
allows to save PCI bandwidth and improve performance at the cost of a
slightly higher CPU usage. Enabled by default.
+ Supported on:
+
+ - x86_64 with ConnectX4 and ConnectX4 LX
+ - Power8 with ConnectX4 LX
+
- ``txq_inline`` parameter [int]
Amount of data to be inlined during TX operations. Improves latency.
@@ -234,7 +239,7 @@ DPDK and must be installed separately:
Currently supported by DPDK:
-- Mellanox OFED **3.3-1.0.0.0**.
+- Mellanox OFED **3.3-1.0.0.0** and **3.3-2.0.0.0**
- Minimum firmware version:
diff --git a/doc/guides/rel_notes/release_16_07.rst b/doc/guides/rel_notes/release_16_07.rst
index d00a6ed..b48f676 100644
--- a/doc/guides/rel_notes/release_16_07.rst
+++ b/doc/guides/rel_notes/release_16_07.rst
@@ -191,7 +191,21 @@ New Features
Live migration of a VM with Virtio and VF PMD's using the bonding PMD.
-
+* **Updated the mlx5 driver.**
+
+ The mlx5 driver was updated with changes including the following:
+
+ * Data path was refactored to bypass Verbs to improve RX and TX performance.
+ * Removed compilation parameters for inline send, MLX5_MAX_INLINE, and
+ added command line parameter instead, txq_inline.
+ * Improved TX scatter gather support:
+ Removed compilation parameter MLX5_PMD_SGE_WR_N.
+ Scatter-gather elements is set to the maximum value the NIC supports.
+ Removed linearization logic, this decreases the memory consumption of the PMD.
+ * Improved jumbo frames support, by dynamically setting RX scatter gather elements
+ according to the MTU and mbuf size,
+ no need for compilation parameter MLX5_PMD_SGE_WR_N.
+
Resolved Issues
---------------
--
1.7.8.2
More information about the dev
mailing list