[dpdk-dev] [PATCH 2/4] virtio: introduce RTE_LIBRTE_VIRTIO_INC_VECTOR

[Jerin Jacob]

like other PMD drivers, introduce RTE_LIBRTE_VIRTIO_INC_VECTOR
for vector based handler selection in virtio

Enabled by default in common config and disabled for non X86
platforms

Signed-off-by: Jerin Jacob <jerin.jacob at caviumnetworks.com>
---
 config/common_base                          | 1 +
 config/defconfig_arm-armv7a-linuxapp-gcc    | 1 +
 config/defconfig_arm64-armv8a-linuxapp-gcc  | 1 +
 config/defconfig_ppc_64-power8-linuxapp-gcc | 1 +
 config/defconfig_tile-tilegx-linuxapp-gcc   | 1 +
 drivers/net/virtio/virtio_rxtx.c            | 2 ++
 6 files changed, 7 insertions(+)

diff --git a/config/common_base b/config/common_base
index 3a04fba..f6ce168 100644
--- a/config/common_base
+++ b/config/common_base
@@ -267,6 +267,7 @@ CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DRIVER=n
 CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
+CONFIG_RTE_LIBRTE_VIRTIO_INC_VECTOR=y
 
 #
 # Compile burst-oriented VMXNET3 PMD driver
diff --git a/config/defconfig_arm-armv7a-linuxapp-gcc b/config/defconfig_arm-armv7a-linuxapp-gcc
index bde6acd..a249ad5 100644
--- a/config/defconfig_arm-armv7a-linuxapp-gcc
+++ b/config/defconfig_arm-armv7a-linuxapp-gcc
@@ -75,3 +75,4 @@ CONFIG_RTE_LIBRTE_VMXNET3_PMD=n
 CONFIG_RTE_LIBRTE_PMD_XENVIRT=n
 CONFIG_RTE_LIBRTE_PMD_BNX2X=n
 CONFIG_RTE_LIBRTE_QEDE_PMD=n
+CONFIG_RTE_LIBRTE_VIRTIO_INC_VECTOR=n
diff --git a/config/defconfig_arm64-armv8a-linuxapp-gcc b/config/defconfig_arm64-armv8a-linuxapp-gcc
index a786562..95ed30e 100644
--- a/config/defconfig_arm64-armv8a-linuxapp-gcc
+++ b/config/defconfig_arm64-armv8a-linuxapp-gcc
@@ -48,5 +48,6 @@ CONFIG_RTE_IXGBE_INC_VECTOR=n
 CONFIG_RTE_LIBRTE_IVSHMEM=n
 CONFIG_RTE_LIBRTE_FM10K_PMD=n
 CONFIG_RTE_LIBRTE_I40E_PMD=n
+CONFIG_RTE_LIBRTE_VIRTIO_INC_VECTOR=n
 
 CONFIG_RTE_SCHED_VECTOR=n
diff --git a/config/defconfig_ppc_64-power8-linuxapp-gcc b/config/defconfig_ppc_64-power8-linuxapp-gcc
index bef8f49..1eca73a 100644
--- a/config/defconfig_ppc_64-power8-linuxapp-gcc
+++ b/config/defconfig_ppc_64-power8-linuxapp-gcc
@@ -51,6 +51,7 @@ CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=n
 CONFIG_RTE_LIBRTE_IXGBE_PMD=n
 CONFIG_RTE_LIBRTE_I40E_PMD=n
 CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
+CONFIG_RTE_LIBRTE_VIRTIO_INC_VECTOR=n
 CONFIG_RTE_LIBRTE_VMXNET3_PMD=n
 CONFIG_RTE_LIBRTE_PMD_BOND=n
 CONFIG_RTE_LIBRTE_ENIC_PMD=n
diff --git a/config/defconfig_tile-tilegx-linuxapp-gcc b/config/defconfig_tile-tilegx-linuxapp-gcc
index 5a50793..0d6fe1e 100644
--- a/config/defconfig_tile-tilegx-linuxapp-gcc
+++ b/config/defconfig_tile-tilegx-linuxapp-gcc
@@ -59,6 +59,7 @@ CONFIG_RTE_LIBRTE_IXGBE_PMD=n
 CONFIG_RTE_LIBRTE_I40E_PMD=n
 CONFIG_RTE_LIBRTE_FM10K_PMD=n
 CONFIG_RTE_LIBRTE_VIRTIO_PMD=n
+CONFIG_RTE_LIBRTE_VIRTIO_INC_VECTOR=n
 CONFIG_RTE_LIBRTE_VMXNET3_PMD=n
 CONFIG_RTE_LIBRTE_ENIC_PMD=n
 
diff --git a/drivers/net/virtio/virtio_rxtx.c b/drivers/net/virtio/virtio_rxtx.c
index 63b53f7..e9b42f3 100644
--- a/drivers/net/virtio/virtio_rxtx.c
+++ b/drivers/net/virtio/virtio_rxtx.c
@@ -499,6 +499,7 @@ virtio_dev_tx_queue_setup(struct rte_eth_dev *dev,
 		return -EINVAL;
 	}
 
+#ifdef RTE_LIBRTE_VIRTIO_INC_VECTOR
 #ifdef RTE_MACHINE_CPUFLAG_SSSE3
 	struct virtio_hw *hw = dev->data->dev_private;
 	/* Use simple rx/tx func if single segment and no offloads */
@@ -510,6 +511,7 @@ virtio_dev_tx_queue_setup(struct rte_eth_dev *dev,
 		hw->use_simple_rxtx = 1;
 	}
 #endif
+#endif
 
 	ret = virtio_dev_queue_setup(dev, VTNET_TQ, queue_idx, vtpci_queue_idx,
 			nb_desc, socket_id, (void **)&txvq);
-- 
2.5.5