[dpdk-dev] [PATCH] config: remove duplicate configuration information

Wiles, Keith keith.wiles at intel.com
Thu Mar 3 15:43:44 CET 2016
Previous message: [dpdk-dev] [PATCH v3 0/5] Implement missing features in mlx5
Next message: [dpdk-dev] [PATCH] config: remove duplicate configuration information
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
>In order to cleanup the configuration files some and reduce
>the number of duplicate configuration information. Add a new
>file called common_base which contains just about all of the
>configuration lines in one place. Then have the common_bsdapp,
>common_linuxapp files include this one file. Then in those OS
>specific files add the delta configuration lines.

Ping. I got a +1 for this patch just trying to get someone else to agree and ack. I know the current stuff kind of works, but it does require modifying multiple files and while moving this to a single place to modify I did find at least on different.

I would like to see this one go in unless it just does not make any sense.

Thanks
++Keith

>
>Signed-off-by: Keith Wiles <keith.wiles at intel.com>
>---
> config/common_base                          | 498 ++++++++++++++++++++++++++++
> config/common_bsdapp                        | 436 +-----------------------
> config/common_linuxapp                      | 491 +--------------------------
> config/defconfig_x86_64-native-bsdapp-clang |   1 +
> config/defconfig_x86_64-native-bsdapp-gcc   |   1 +
> 5 files changed, 518 insertions(+), 909 deletions(-)
> create mode 100644 config/common_base
>
>diff --git a/config/common_base b/config/common_base
>new file mode 100644
>index 0000000..91a12eb
>--- /dev/null
>+++ b/config/common_base
>@@ -0,0 +1,498 @@
>+#   BSD LICENSE
>+#
>+#   Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
>+#   All rights reserved.
>+#
>+#   Redistribution and use in source and binary forms, with or without
>+#   modification, are permitted provided that the following conditions
>+#   are met:
>+#
>+#     * Redistributions of source code must retain the above copyright
>+#       notice, this list of conditions and the following disclaimer.
>+#     * Redistributions in binary form must reproduce the above copyright
>+#       notice, this list of conditions and the following disclaimer in
>+#       the documentation and/or other materials provided with the
>+#       distribution.
>+#     * Neither the name of Intel Corporation nor the names of its
>+#       contributors may be used to endorse or promote products derived
>+#       from this software without specific prior written permission.
>+#
>+#   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
>+#   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
>+#   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
>+#   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
>+#   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
>+#   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
>+#   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
>+#   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
>+#   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
>+#   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
>+#   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
>+#
>+
>+#
>+# Use intrinsics or assembly code for key routines
>+#
>+CONFIG_RTE_FORCE_INTRINSICS=n
>+
>+#
>+# Machine forces strict alignment constraints.
>+#
>+CONFIG_RTE_ARCH_STRICT_ALIGN=n
>+
>+#
>+# Compile to share library
>+#
>+CONFIG_RTE_BUILD_SHARED_LIB=n
>+
>+#
>+# Combine to one single library
>+#
>+CONFIG_RTE_BUILD_COMBINE_LIBS=n
>+
>+#
>+# Use newest code breaking previous ABI
>+#
>+CONFIG_RTE_NEXT_ABI=y
>+
>+#
>+# Machine's cache line size
>+#
>+CONFIG_RTE_CACHE_LINE_SIZE=64
>+
>+#
>+# Compile Environment Abstraction Layer
>+#
>+CONFIG_RTE_LIBRTE_EAL=y
>+CONFIG_RTE_MAX_LCORE=128
>+CONFIG_RTE_MAX_NUMA_NODES=8
>+CONFIG_RTE_MAX_MEMSEG=256
>+CONFIG_RTE_MAX_MEMZONE=2560
>+CONFIG_RTE_MAX_TAILQ=32
>+CONFIG_RTE_LOG_LEVEL=8
>+CONFIG_RTE_LOG_HISTORY=256
>+CONFIG_RTE_LIBEAL_USE_HPET=n
>+CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
>+CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
>+CONFIG_RTE_EAL_IGB_UIO=y
>+CONFIG_RTE_EAL_VFIO=y
>+CONFIG_RTE_MALLOC_DEBUG=n
>+
>+# Default driver path (or "" to disable)
>+CONFIG_RTE_EAL_PMD_PATH=""
>+
>+#
>+# Special configurations in PCI Config Space for high performance
>+#
>+CONFIG_RTE_PCI_CONFIG=n
>+CONFIG_RTE_PCI_EXTENDED_TAG=""
>+CONFIG_RTE_PCI_MAX_READ_REQUEST_SIZE=0
>+
>+#
>+# Compile Environment Abstraction Layer to support Vmware TSC map
>+#
>+CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
>+
>+#
>+# Compile the argument parser library
>+#
>+CONFIG_RTE_LIBRTE_KVARGS=y
>+
>+#
>+# Compile generic ethernet library
>+#
>+CONFIG_RTE_LIBRTE_ETHER=y
>+CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
>+CONFIG_RTE_MAX_ETHPORTS=32
>+CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
>+CONFIG_RTE_LIBRTE_IEEE1588=n
>+CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
>+CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
>+
>+#
>+# Support NIC bypass logic
>+#
>+CONFIG_RTE_NIC_BYPASS=n
>+
>+#
>+# Compile burst-oriented IGB & EM PMD drivers
>+#
>+CONFIG_RTE_LIBRTE_EM_PMD=y
>+CONFIG_RTE_LIBRTE_IGB_PMD=y
>+CONFIG_RTE_LIBRTE_E1000_DEBUG_INIT=n
>+CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
>+CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
>+CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
>+CONFIG_RTE_LIBRTE_E1000_DEBUG_DRIVER=n
>+CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
>+
>+#
>+# Compile burst-oriented IXGBE PMD driver
>+#
>+CONFIG_RTE_LIBRTE_IXGBE_PMD=y
>+CONFIG_RTE_LIBRTE_IXGBE_DEBUG_INIT=n
>+CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
>+CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
>+CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
>+CONFIG_RTE_LIBRTE_IXGBE_DEBUG_DRIVER=n
>+CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
>+CONFIG_RTE_IXGBE_INC_VECTOR=y
>+CONFIG_RTE_IXGBE_RX_OLFLAGS_ENABLE=y
>+
>+#
>+# Compile burst-oriented I40E PMD driver
>+#
>+CONFIG_RTE_LIBRTE_I40E_PMD=y
>+CONFIG_RTE_LIBRTE_I40E_DEBUG_INIT=n
>+CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
>+CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
>+CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
>+CONFIG_RTE_LIBRTE_I40E_DEBUG_DRIVER=n
>+CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
>+CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=n
>+CONFIG_RTE_LIBRTE_I40E_RX_OLFLAGS_ENABLE=y
>+CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
>+CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
>+CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4
>+CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
>+# interval up to 8160 us, aligned to 2 (or default value)
>+CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1
>+
>+#
>+# Compile burst-oriented FM10K PMD
>+#
>+CONFIG_RTE_LIBRTE_FM10K_PMD=y
>+CONFIG_RTE_LIBRTE_FM10K_DEBUG_INIT=n
>+CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
>+CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
>+CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
>+CONFIG_RTE_LIBRTE_FM10K_DEBUG_DRIVER=n
>+CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
>+CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
>+
>+#
>+# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
>+#
>+CONFIG_RTE_LIBRTE_MLX4_PMD=n
>+CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
>+CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N=4
>+CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE=0
>+CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
>+CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
>+
>+#
>+# Compile burst-oriented Mellanox ConnectX-4 (MLX5) PMD
>+#
>+CONFIG_RTE_LIBRTE_MLX5_PMD=n
>+CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
>+CONFIG_RTE_LIBRTE_MLX5_SGE_WR_N=4
>+CONFIG_RTE_LIBRTE_MLX5_MAX_INLINE=0
>+CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE=8
>+
>+#
>+# Compile burst-oriented Broadcom PMD driver
>+#
>+CONFIG_RTE_LIBRTE_BNX2X_PMD=n
>+CONFIG_RTE_LIBRTE_BNX2X_DEBUG=n
>+CONFIG_RTE_LIBRTE_BNX2X_DEBUG_INIT=n
>+CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
>+CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
>+CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
>+CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
>+
>+#
>+# Compile burst-oriented Chelsio Terminator 10GbE/40GbE (CXGBE) PMD
>+#
>+CONFIG_RTE_LIBRTE_CXGBE_PMD=y
>+CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n
>+CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n
>+CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n
>+CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n
>+CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n
>+
>+#
>+# Compile burst-oriented Cisco ENIC PMD driver
>+#
>+CONFIG_RTE_LIBRTE_ENIC_PMD=y
>+CONFIG_RTE_LIBRTE_ENIC_DEBUG=n
>+
>+#
>+# Compile burst-oriented Netronome NFP PMD driver
>+#
>+CONFIG_RTE_LIBRTE_NFP_PMD=n
>+CONFIG_RTE_LIBRTE_NFP_DEBUG=n
>+
>+#
>+# Compile software PMD backed by SZEDATA2 device
>+#
>+CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
>+
>+#
>+# Compile burst-oriented VIRTIO PMD driver
>+#
>+CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
>+CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_INIT=n
>+CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
>+CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
>+CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DRIVER=n
>+CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
>+
>+#
>+# Compile burst-oriented VMXNET3 PMD driver
>+#
>+CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
>+CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_INIT=n
>+CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
>+CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
>+CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
>+CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_DRIVER=n
>+
>+#
>+# Compile example software rings based PMD
>+#
>+CONFIG_RTE_LIBRTE_PMD_RING=y
>+CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
>+CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
>+
>+#
>+# Compile software PMD backed by PCAP files
>+#
>+CONFIG_RTE_LIBRTE_PMD_PCAP=n
>+
>+#
>+# Compile link bonding PMD library
>+#
>+CONFIG_RTE_LIBRTE_PMD_BOND=y
>+CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
>+CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
>+
>+#
>+# Compile software PMD backed by AF_PACKET sockets (Linux only)
>+#
>+CONFIG_RTE_LIBRTE_PMD_AF_PACKET=y
>+
>+#
>+# Compile Xen PMD
>+#
>+CONFIG_RTE_LIBRTE_PMD_XENVIRT=n
>+
>+#
>+# Compile null PMD
>+#
>+CONFIG_RTE_LIBRTE_PMD_NULL=y
>+
>+#
>+# Do prefetch of packet data within PMD driver receive function
>+#
>+CONFIG_RTE_PMD_PACKET_PREFETCH=y
>+
>+#
>+# Compile generic crypto device library
>+# EXPERIMENTAL: API may change without prior notice
>+#
>+CONFIG_RTE_LIBRTE_CRYPTODEV=y
>+CONFIG_RTE_LIBRTE_CRYPTODEV_DEBUG=n
>+CONFIG_RTE_CRYPTO_MAX_DEVS=64
>+CONFIG_RTE_CRYPTODEV_NAME_LEN=64
>+
>+#
>+# Compile PMD for QuickAssist based devices
>+#
>+CONFIG_RTE_LIBRTE_PMD_QAT=n
>+CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_INIT=n
>+CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_TX=n
>+CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_RX=n
>+CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER=n
>+#
>+# Number of sessions to create in the session memory pool
>+# on a single QuickAssist device.
>+#
>+CONFIG_RTE_QAT_PMD_MAX_NB_SESSIONS=2048
>+
>+#
>+# Compile PMD for AESNI backed device
>+#
>+CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
>+CONFIG_RTE_LIBRTE_PMD_AESNI_MB_DEBUG=n
>+CONFIG_RTE_AESNI_MB_PMD_MAX_NB_QUEUE_PAIRS=8
>+CONFIG_RTE_AESNI_MB_PMD_MAX_NB_SESSIONS=2048
>+
>+#
>+# Compile librte_ring
>+#
>+CONFIG_RTE_LIBRTE_RING=y
>+CONFIG_RTE_LIBRTE_RING_DEBUG=n
>+CONFIG_RTE_RING_SPLIT_PROD_CONS=n
>+CONFIG_RTE_RING_PAUSE_REP_COUNT=0
>+
>+#
>+# Compile librte_mempool
>+#
>+CONFIG_RTE_LIBRTE_MEMPOOL=y
>+CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
>+CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
>+
>+#
>+# Compile librte_mbuf
>+#
>+CONFIG_RTE_LIBRTE_MBUF=y
>+CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
>+CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
>+CONFIG_RTE_PKTMBUF_HEADROOM=128
>+
>+#
>+# Compile librte_mbuf_offload
>+# EXPERIMENTAL: API may change without prior notice
>+#
>+CONFIG_RTE_LIBRTE_MBUF_OFFLOAD=y
>+CONFIG_RTE_LIBRTE_MBUF_OFFLOAD_DEBUG=n
>+
>+#
>+# Compile librte_timer
>+#
>+CONFIG_RTE_LIBRTE_TIMER=y
>+CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
>+
>+#
>+# Compile librte_cfgfile
>+#
>+CONFIG_RTE_LIBRTE_CFGFILE=y
>+
>+#
>+# Compile librte_cmdline
>+#
>+CONFIG_RTE_LIBRTE_CMDLINE=y
>+CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
>+
>+#
>+# Compile librte_hash
>+#
>+CONFIG_RTE_LIBRTE_HASH=y
>+CONFIG_RTE_LIBRTE_HASH_DEBUG=n
>+
>+#
>+# Compile librte_jobstats
>+#
>+CONFIG_RTE_LIBRTE_JOBSTATS=y
>+
>+#
>+# Compile librte_lpm
>+#
>+CONFIG_RTE_LIBRTE_LPM=y
>+CONFIG_RTE_LIBRTE_LPM_DEBUG=n
>+
>+#
>+# Compile librte_acl
>+#
>+CONFIG_RTE_LIBRTE_ACL=y
>+CONFIG_RTE_LIBRTE_ACL_DEBUG=n
>+
>+#
>+# Compile librte_power
>+#
>+CONFIG_RTE_LIBRTE_POWER=y
>+CONFIG_RTE_LIBRTE_POWER_DEBUG=n
>+CONFIG_RTE_MAX_LCORE_FREQS=64
>+
>+#
>+# Compile librte_net
>+#
>+CONFIG_RTE_LIBRTE_NET=y
>+
>+#
>+# Compile librte_ip_frag
>+#
>+CONFIG_RTE_LIBRTE_IP_FRAG=y
>+CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
>+CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
>+CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
>+
>+#
>+# Compile librte_meter
>+#
>+CONFIG_RTE_LIBRTE_METER=y
>+
>+#
>+# Compile librte_sched
>+#
>+CONFIG_RTE_LIBRTE_SCHED=y
>+CONFIG_RTE_SCHED_DEBUG=n
>+CONFIG_RTE_SCHED_RED=n
>+CONFIG_RTE_SCHED_COLLECT_STATS=n
>+CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
>+CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
>+CONFIG_RTE_SCHED_VECTOR=n
>+
>+#
>+# Compile the distributor library
>+#
>+CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
>+
>+#
>+# Compile the reorder library
>+#
>+CONFIG_RTE_LIBRTE_REORDER=y
>+
>+#
>+# Compile librte_port
>+#
>+CONFIG_RTE_LIBRTE_PORT=y
>+CONFIG_RTE_PORT_STATS_COLLECT=n
>+
>+#
>+# Compile librte_table
>+#
>+CONFIG_RTE_LIBRTE_TABLE=y
>+CONFIG_RTE_TABLE_STATS_COLLECT=n
>+
>+#
>+# Compile librte_pipeline
>+#
>+CONFIG_RTE_LIBRTE_PIPELINE=y
>+CONFIG_RTE_PIPELINE_STATS_COLLECT=n
>+
>+#
>+# Compile librte_kni
>+#
>+CONFIG_RTE_LIBRTE_KNI=y
>+CONFIG_RTE_KNI_KMOD=y
>+CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
>+CONFIG_RTE_KNI_KO_DEBUG=n
>+CONFIG_RTE_KNI_VHOST=n
>+CONFIG_RTE_KNI_VHOST_MAX_CACHE_SIZE=1024
>+CONFIG_RTE_KNI_VHOST_VNET_HDR_EN=n
>+CONFIG_RTE_KNI_VHOST_DEBUG_RX=n
>+CONFIG_RTE_KNI_VHOST_DEBUG_TX=n
>+
>+#
>+# Compile vhost library
>+# fuse-devel is needed to run vhost-cuse.
>+# fuse-devel enables user space char driver development
>+# vhost-user is turned on by default.
>+#
>+CONFIG_RTE_LIBRTE_VHOST=y
>+CONFIG_RTE_LIBRTE_VHOST_USER=y
>+CONFIG_RTE_LIBRTE_VHOST_NUMA=n
>+CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
>+
>+#
>+#Compile Xen domain0 support
>+#
>+CONFIG_RTE_LIBRTE_XEN_DOM0=n
>+
>+#
>+# Enable warning directives
>+#
>+CONFIG_RTE_INSECURE_FUNCTION_WARNING=n
>+
>+#
>+# Compile the test application
>+#
>+CONFIG_RTE_APP_TEST=y
>+
>+#
>+# Compile the PMD test application
>+#
>+CONFIG_RTE_TEST_PMD=y
>+CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
>+CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
>diff --git a/config/common_bsdapp b/config/common_bsdapp
>index 696382c..de0ca7d 100644
>--- a/config/common_bsdapp
>+++ b/config/common_bsdapp
>@@ -1,6 +1,6 @@
> #   BSD LICENSE
> #
>-#   Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
>+#   Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
> #   All rights reserved.
> #
> #   Redistribution and use in source and binary forms, with or without
>@@ -37,74 +37,38 @@
> CONFIG_RTE_EXEC_ENV="bsdapp"
> CONFIG_RTE_EXEC_ENV_BSDAPP=y
> 
>-##
>-## machine can define specific variables or action for a specific board
>-## RTE_MACHINE values are the directories in mk/machine/
>-##
>-#CONFIG_RTE_MACHINE="native"
>-#
>-##
>-## define the architecture we compile for.
>-## RTE_ARCH values are the directories in mk/arch/
>-##
>-#CONFIG_RTE_ARCH="x86_64"
>-#CONFIG_RTE_ARCH_X86_64=y
>-#CONFIG_RTE_ARCH_X86=y
>-#
>-##
>-## The compiler we use.
>-## RTE_TOOLCHAIN values are the directories in mk/toolchain/
>-##
>-#CONFIG_RTE_TOOLCHAIN="gcc"
>-#CONFIG_RTE_TOOLCHAIN_GCC=y
>-
>-#
>-# Use intrinsics or assembly code for key routines
>-#
>-CONFIG_RTE_FORCE_INTRINSICS=n
>+#include "common_base"
> 
> #
>-# Machine forces strict alignment constraints.
>+# Compile Environment Abstraction Layer for linux, FreeBSD, OS X, ...
> #
>-CONFIG_RTE_ARCH_STRICT_ALIGN=n
>+CONFIG_RTE_LIBRTE_EAL_BSDAPP=y
> 
> #
>-# Compile to share library
>+# Compile Environment Abstraction Layer
> #
>-CONFIG_RTE_BUILD_SHARED_LIB=n
>+CONFIG_RTE_EAL_IGB_UIO=n
>+CONFIG_RTE_EAL_VFIO=n
> 
> #
>-# Combine to one single library
>+# Compile software PMD backed by AF_PACKET sockets (Linux only)
> #
>-CONFIG_RTE_BUILD_COMBINE_LIBS=n
>+CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
> 
> #
>-# Use newest code breaking previous ABI
>+# Compile librte_power
> #
>-CONFIG_RTE_NEXT_ABI=y
>+CONFIG_RTE_LIBRTE_POWER=n
> 
> #
>-# Machine's cache line size
>+# Compile librte_kni
> #
>-CONFIG_RTE_CACHE_LINE_SIZE=64
>+CONFIG_RTE_LIBRTE_KNI=n
> 
> #
>-# Compile Environment Abstraction Layer
>+# Compile vhost library
> #
>-CONFIG_RTE_LIBRTE_EAL=y
>-CONFIG_RTE_MAX_LCORE=128
>-CONFIG_RTE_MAX_NUMA_NODES=8
>-CONFIG_RTE_MAX_MEMSEG=256
>-CONFIG_RTE_MAX_MEMZONE=2560
>-CONFIG_RTE_MAX_TAILQ=32
>-CONFIG_RTE_LOG_LEVEL=8
>-CONFIG_RTE_LOG_HISTORY=256
>-CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
>-CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
>-CONFIG_RTE_MALLOC_DEBUG=n
>-
>-# Default driver path (or "" to disable)
>-CONFIG_RTE_EAL_PMD_PATH=""
>+CONFIG_RTE_LIBRTE_VHOST=n
> 
> #
> # FreeBSD contiguous memory driver settings
>@@ -113,373 +77,3 @@ CONFIG_RTE_CONTIGMEM_MAX_NUM_BUFS=64
> CONFIG_RTE_CONTIGMEM_DEFAULT_NUM_BUFS=2
> CONFIG_RTE_CONTIGMEM_DEFAULT_BUF_SIZE=1024*1024*1024
> 
>-#
>-# Compile Environment Abstraction Layer for BSD
>-#
>-CONFIG_RTE_LIBRTE_EAL_BSDAPP=y
>-
>-#
>-# Compile Environment Abstraction Layer for linux
>-#
>-CONFIG_RTE_LIBRTE_EAL_LINUXAPP=n
>-
>-#
>-# Compile Environment Abstraction Layer to support Vmware TSC map
>-#
>-CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
>-
>-#
>-# Compile the argument parser library
>-#
>-CONFIG_RTE_LIBRTE_KVARGS=y
>-
>-#
>-# Compile generic ethernet library
>-#
>-CONFIG_RTE_LIBRTE_ETHER=y
>-CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
>-CONFIG_RTE_MAX_ETHPORTS=32
>-CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
>-CONFIG_RTE_LIBRTE_IEEE1588=n
>-CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
>-CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
>-
>-#
>-# Support NIC bypass logic
>-#
>-CONFIG_RTE_NIC_BYPASS=n
>-
>-#
>-# Compile burst-oriented IGB & EM PMD drivers
>-#
>-CONFIG_RTE_LIBRTE_EM_PMD=y
>-CONFIG_RTE_LIBRTE_IGB_PMD=y
>-CONFIG_RTE_LIBRTE_E1000_DEBUG_INIT=n
>-CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
>-CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
>-CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
>-CONFIG_RTE_LIBRTE_E1000_DEBUG_DRIVER=n
>-CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
>-
>-#
>-# Compile burst-oriented IXGBE PMD driver
>-#
>-CONFIG_RTE_LIBRTE_IXGBE_PMD=y
>-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_INIT=n
>-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
>-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
>-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
>-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_DRIVER=n
>-CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
>-CONFIG_RTE_IXGBE_INC_VECTOR=y
>-CONFIG_RTE_IXGBE_RX_OLFLAGS_ENABLE=y
>-
>-#
>-# Compile burst-oriented I40E PMD driver
>-#
>-CONFIG_RTE_LIBRTE_I40E_PMD=y
>-CONFIG_RTE_LIBRTE_I40E_DEBUG_INIT=n
>-CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
>-CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
>-CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
>-CONFIG_RTE_LIBRTE_I40E_DEBUG_DRIVER=n
>-CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
>-CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=n
>-CONFIG_RTE_LIBRTE_I40E_RX_OLFLAGS_ENABLE=y
>-CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
>-CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
>-CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4
>-CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
>-# interval up to 8160 us, aligned to 2 (or default value)
>-CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1
>-
>-#
>-# Compile burst-oriented FM10K PMD
>-#
>-CONFIG_RTE_LIBRTE_FM10K_PMD=y
>-CONFIG_RTE_LIBRTE_FM10K_DEBUG_INIT=n
>-CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
>-CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
>-CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
>-CONFIG_RTE_LIBRTE_FM10K_DEBUG_DRIVER=n
>-CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
>-
>-#
>-# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
>-#
>-CONFIG_RTE_LIBRTE_MLX4_PMD=n
>-CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
>-CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N=4
>-CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE=0
>-CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
>-CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
>-
>-#
>-# Compile burst-oriented Mellanox ConnectX-4 (MLX5) PMD
>-#
>-CONFIG_RTE_LIBRTE_MLX5_PMD=n
>-CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
>-CONFIG_RTE_LIBRTE_MLX5_SGE_WR_N=4
>-CONFIG_RTE_LIBRTE_MLX5_MAX_INLINE=0
>-CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE=8
>-
>-#
>-# Compile burst-oriented Broadcom PMD driver
>-#
>-CONFIG_RTE_LIBRTE_BNX2X_PMD=n
>-CONFIG_RTE_LIBRTE_BNX2X_DEBUG=n
>-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_INIT=n
>-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
>-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
>-CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
>-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
>-
>-#
>-# Compile burst-oriented Chelsio Terminator 10GbE/40GbE (CXGBE) PMD
>-#
>-CONFIG_RTE_LIBRTE_CXGBE_PMD=y
>-CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n
>-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n
>-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n
>-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n
>-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n
>-
>-#
>-# Compile burst-oriented Cisco ENIC PMD driver
>-#
>-CONFIG_RTE_LIBRTE_ENIC_PMD=y
>-CONFIG_RTE_LIBRTE_ENIC_DEBUG=n
>-
>-#
>-# Compile software PMD backed by SZEDATA2 device
>-#
>-CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
>-
>-#
>-# Compile burst-oriented VIRTIO PMD driver
>-#
>-CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
>-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_INIT=n
>-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
>-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
>-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DRIVER=n
>-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
>-
>-#
>-# Compile burst-oriented VMXNET3 PMD driver
>-#
>-CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
>-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_INIT=n
>-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
>-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
>-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
>-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_DRIVER=n
>-
>-#
>-# Compile example software rings based PMD
>-#
>-CONFIG_RTE_LIBRTE_PMD_RING=y
>-CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
>-CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
>-
>-#
>-# Compile software PMD backed by PCAP files
>-#
>-CONFIG_RTE_LIBRTE_PMD_PCAP=y
>-
>-#
>-# Compile link bonding PMD library
>-#
>-CONFIG_RTE_LIBRTE_PMD_BOND=y
>-CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
>-CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
>-
>-#
>-# Compile null PMD
>-#
>-CONFIG_RTE_LIBRTE_PMD_NULL=y
>-
>-#
>-# Do prefetch of packet data within PMD driver receive function
>-#
>-CONFIG_RTE_PMD_PACKET_PREFETCH=y
>-
>-#
>-# Compile generic crypto device library
>-# EXPERIMENTAL: API may change without prior notice
>-#
>-CONFIG_RTE_LIBRTE_CRYPTODEV=y
>-CONFIG_RTE_LIBRTE_CRYPTODEV_DEBUG=n
>-CONFIG_RTE_CRYPTO_MAX_DEVS=64
>-CONFIG_RTE_CRYPTODEV_NAME_LEN=64
>-
>-#
>-# Compile PMD for QuickAssist based devices
>-#
>-CONFIG_RTE_LIBRTE_PMD_QAT=n
>-CONFIG_RTE_LIBRTE_QAT_DEBUG_INIT=n
>-CONFIG_RTE_LIBRTE_QAT_DEBUG_TX=n
>-CONFIG_RTE_LIBRTE_QAT_DEBUG_RX=n
>-CONFIG_RTE_LIBRTE_QAT_DEBUG_DRIVER=n
>-#
>-# Number of sessions to create in the session memory pool
>-# on a single QuickAssist device.
>-#
>-CONFIG_RTE_MAX_QAT_SESSIONS=200
>-
>-#
>-# Compile PMD for AESNI backed device
>-#
>-CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
>-CONFIG_RTE_LIBRTE_AESNI_MB_DEBUG=n
>-
>-#
>-# Compile librte_ring
>-#
>-CONFIG_RTE_LIBRTE_RING=y
>-CONFIG_RTE_LIBRTE_RING_DEBUG=n
>-CONFIG_RTE_RING_SPLIT_PROD_CONS=n
>-CONFIG_RTE_RING_PAUSE_REP_COUNT=0
>-
>-#
>-# Compile librte_mempool
>-#
>-CONFIG_RTE_LIBRTE_MEMPOOL=y
>-CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
>-CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
>-
>-#
>-# Compile librte_mbuf
>-#
>-CONFIG_RTE_LIBRTE_MBUF=y
>-CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
>-CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
>-CONFIG_RTE_PKTMBUF_HEADROOM=128
>-
>-#
>-# Compile librte_mbuf_offload
>-# EXPERIMENTAL: API may change without prior notice
>-#
>-CONFIG_RTE_LIBRTE_MBUF_OFFLOAD=y
>-CONFIG_RTE_LIBRTE_MBUF_OFFLOAD_DEBUG=n
>-
>-#
>-# Compile librte_timer
>-#
>-CONFIG_RTE_LIBRTE_TIMER=y
>-CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
>-
>-#
>-# Compile librte_cfgfile
>-#
>-CONFIG_RTE_LIBRTE_CFGFILE=y
>-
>-#
>-# Compile librte_cmdline
>-#
>-CONFIG_RTE_LIBRTE_CMDLINE=y
>-CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
>-
>-#
>-# Compile librte_hash
>-#
>-CONFIG_RTE_LIBRTE_HASH=y
>-CONFIG_RTE_LIBRTE_HASH_DEBUG=n
>-
>-#
>-# Compile librte_jobstats
>-#
>-CONFIG_RTE_LIBRTE_JOBSTATS=y
>-
>-#
>-# Compile librte_lpm
>-#
>-CONFIG_RTE_LIBRTE_LPM=y
>-CONFIG_RTE_LIBRTE_LPM_DEBUG=n
>-
>-#
>-# Compile librte_acl
>-#
>-CONFIG_RTE_LIBRTE_ACL=y
>-CONFIG_RTE_LIBRTE_ACL_DEBUG=n
>-
>-#
>-# Compile librte_power
>-#
>-CONFIG_RTE_LIBRTE_POWER=n
>-CONFIG_RTE_LIBRTE_POWER_DEBUG=n
>-CONFIG_RTE_MAX_LCORE_FREQS=64
>-
>-#
>-# Compile librte_net
>-#
>-CONFIG_RTE_LIBRTE_NET=y
>-
>-#
>-# Compile librte_ip_frag
>-#
>-CONFIG_RTE_LIBRTE_IP_FRAG=y
>-CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
>-CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
>-CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
>-
>-#
>-# Compile librte_meter
>-#
>-CONFIG_RTE_LIBRTE_METER=y
>-
>-#
>-# Compile librte_sched
>-#
>-CONFIG_RTE_LIBRTE_SCHED=y
>-CONFIG_RTE_SCHED_DEBUG=n
>-CONFIG_RTE_SCHED_RED=n
>-CONFIG_RTE_SCHED_COLLECT_STATS=n
>-CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
>-CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
>-CONFIG_RTE_SCHED_VECTOR=n
>-
>-#
>-# Compile the distributor library
>-#
>-CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
>-
>-#
>-# Compile the reorder library
>-#
>-CONFIG_RTE_LIBRTE_REORDER=y
>-
>-#
>-# Compile librte_port
>-#
>-CONFIG_RTE_LIBRTE_PORT=y
>-CONFIG_RTE_PORT_STATS_COLLECT=n
>-
>-#
>-# Compile librte_table
>-#
>-CONFIG_RTE_LIBRTE_TABLE=y
>-CONFIG_RTE_TABLE_STATS_COLLECT=n
>-
>-#
>-# Compile librte_pipeline
>-#
>-CONFIG_RTE_LIBRTE_PIPELINE=y
>-CONFIG_RTE_PIPELINE_STATS_COLLECT=n
>-
>-#
>-# Enable warning directives
>-#
>-CONFIG_RTE_INSECURE_FUNCTION_WARNING=n
>-
>-#
>-# Compile the test application
>-#
>-CONFIG_RTE_APP_TEST=y
>-
>-#
>-# Compile the PMD test application
>-#
>-CONFIG_RTE_TEST_PMD=y
>-CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
>-CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
>diff --git a/config/common_linuxapp b/config/common_linuxapp
>index f1638db..64ddbe9 100644
>--- a/config/common_linuxapp
>+++ b/config/common_linuxapp
>@@ -1,6 +1,6 @@
> #   BSD LICENSE
> #
>-#   Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
>+#   Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
> #   All rights reserved.
> #
> #   Redistribution and use in source and binary forms, with or without
>@@ -37,494 +37,9 @@
> CONFIG_RTE_EXEC_ENV="linuxapp"
> CONFIG_RTE_EXEC_ENV_LINUXAPP=y
> 
>-##
>-## machine can define specific variables or action for a specific board
>-## RTE_MACHINE values are the directories in mk/machine/
>-##
>-#CONFIG_RTE_MACHINE="native"
>-#
>-##
>-## define the architecture we compile for.
>-## RTE_ARCH values are the directories in mk/arch/
>-##
>-#CONFIG_RTE_ARCH="x86_64"
>-#CONFIG_RTE_ARCH_X86_64=y
>-#CONFIG_RTE_ARCH_X86=y
>-#
>-##
>-## The compiler we use.
>-## RTE_TOOLCHAIN values are the directories in mk/toolchain/
>-##
>-#CONFIG_RTE_TOOLCHAIN="gcc"
>-#CONFIG_RTE_TOOLCHAIN_GCC=y
>-
>-#
>-# Use intrinsics or assembly code for key routines
>-#
>-CONFIG_RTE_FORCE_INTRINSICS=n
>-
>-#
>-# Machine forces strict alignment constraints.
>-#
>-CONFIG_RTE_ARCH_STRICT_ALIGN=n
>-
>-#
>-# Compile to share library
>-#
>-CONFIG_RTE_BUILD_SHARED_LIB=n
>-
>-#
>-# Combine to one single library
>-#
>-CONFIG_RTE_BUILD_COMBINE_LIBS=n
>-
>-#
>-# Use newest code breaking previous ABI
>-#
>-CONFIG_RTE_NEXT_ABI=y
>-
>-#
>-# Machine's cache line size
>-#
>-CONFIG_RTE_CACHE_LINE_SIZE=64
>-
>-#
>-# Compile Environment Abstraction Layer
>-#
>-CONFIG_RTE_LIBRTE_EAL=y
>-CONFIG_RTE_MAX_LCORE=128
>-CONFIG_RTE_MAX_NUMA_NODES=8
>-CONFIG_RTE_MAX_MEMSEG=256
>-CONFIG_RTE_MAX_MEMZONE=2560
>-CONFIG_RTE_MAX_TAILQ=32
>-CONFIG_RTE_LOG_LEVEL=8
>-CONFIG_RTE_LOG_HISTORY=256
>-CONFIG_RTE_LIBEAL_USE_HPET=n
>-CONFIG_RTE_EAL_ALLOW_INV_SOCKET_ID=n
>-CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
>-CONFIG_RTE_EAL_IGB_UIO=y
>-CONFIG_RTE_EAL_VFIO=y
>-CONFIG_RTE_MALLOC_DEBUG=n
>-# Default driver path (or "" to disable)
>-CONFIG_RTE_EAL_PMD_PATH=""
>-
>-#
>-# Special configurations in PCI Config Space for high performance
>-#
>-CONFIG_RTE_PCI_CONFIG=n
>-CONFIG_RTE_PCI_EXTENDED_TAG=""
>-CONFIG_RTE_PCI_MAX_READ_REQUEST_SIZE=0
>+#include "common_base"
> 
> #
>-# Compile Environment Abstraction Layer for linux
>+# Compile Environment Abstraction Layer for linux, FreeBSD, OS X, ...
> #
> CONFIG_RTE_LIBRTE_EAL_LINUXAPP=y
>-
>-#
>-# Compile Environment Abstraction Layer to support Vmware TSC map
>-#
>-CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
>-
>-#
>-# Compile the argument parser library
>-#
>-CONFIG_RTE_LIBRTE_KVARGS=y
>-
>-#
>-# Compile generic ethernet library
>-#
>-CONFIG_RTE_LIBRTE_ETHER=y
>-CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n
>-CONFIG_RTE_MAX_ETHPORTS=32
>-CONFIG_RTE_MAX_QUEUES_PER_PORT=1024
>-CONFIG_RTE_LIBRTE_IEEE1588=n
>-CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
>-CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
>-
>-#
>-# Support NIC bypass logic
>-#
>-CONFIG_RTE_NIC_BYPASS=n
>-
>-#
>-# Compile burst-oriented IGB & EM PMD drivers
>-#
>-CONFIG_RTE_LIBRTE_EM_PMD=y
>-CONFIG_RTE_LIBRTE_IGB_PMD=y
>-CONFIG_RTE_LIBRTE_E1000_DEBUG_INIT=n
>-CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
>-CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
>-CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
>-CONFIG_RTE_LIBRTE_E1000_DEBUG_DRIVER=n
>-CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
>-
>-#
>-# Compile burst-oriented IXGBE PMD driver
>-#
>-CONFIG_RTE_LIBRTE_IXGBE_PMD=y
>-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_INIT=n
>-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
>-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
>-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
>-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_DRIVER=n
>-CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
>-CONFIG_RTE_IXGBE_INC_VECTOR=y
>-CONFIG_RTE_IXGBE_RX_OLFLAGS_ENABLE=y
>-
>-#
>-# Compile burst-oriented I40E PMD driver
>-#
>-CONFIG_RTE_LIBRTE_I40E_PMD=y
>-CONFIG_RTE_LIBRTE_I40E_DEBUG_INIT=n
>-CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
>-CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
>-CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
>-CONFIG_RTE_LIBRTE_I40E_DEBUG_DRIVER=n
>-CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
>-CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=n
>-CONFIG_RTE_LIBRTE_I40E_RX_OLFLAGS_ENABLE=y
>-CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
>-CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
>-CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4
>-CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
>-# interval up to 8160 us, aligned to 2 (or default value)
>-CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1
>-
>-#
>-# Compile burst-oriented FM10K PMD
>-#
>-CONFIG_RTE_LIBRTE_FM10K_PMD=y
>-CONFIG_RTE_LIBRTE_FM10K_DEBUG_INIT=n
>-CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
>-CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
>-CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
>-CONFIG_RTE_LIBRTE_FM10K_DEBUG_DRIVER=n
>-CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
>-CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
>-
>-#
>-# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
>-#
>-CONFIG_RTE_LIBRTE_MLX4_PMD=n
>-CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
>-CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N=4
>-CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE=0
>-CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
>-CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
>-
>-#
>-# Compile burst-oriented Mellanox ConnectX-4 (MLX5) PMD
>-#
>-CONFIG_RTE_LIBRTE_MLX5_PMD=n
>-CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
>-CONFIG_RTE_LIBRTE_MLX5_SGE_WR_N=4
>-CONFIG_RTE_LIBRTE_MLX5_MAX_INLINE=0
>-CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE=8
>-
>-#
>-# Compile burst-oriented Broadcom PMD driver
>-#
>-CONFIG_RTE_LIBRTE_BNX2X_PMD=n
>-CONFIG_RTE_LIBRTE_BNX2X_DEBUG=n
>-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_INIT=n
>-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
>-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
>-CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
>-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
>-
>-#
>-# Compile burst-oriented Chelsio Terminator 10GbE/40GbE (CXGBE) PMD
>-#
>-CONFIG_RTE_LIBRTE_CXGBE_PMD=y
>-CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n
>-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n
>-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n
>-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n
>-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n
>-
>-#
>-# Compile burst-oriented Cisco ENIC PMD driver
>-#
>-CONFIG_RTE_LIBRTE_ENIC_PMD=y
>-CONFIG_RTE_LIBRTE_ENIC_DEBUG=n
>-
>-#
>-# Compile burst-oriented Netronome NFP PMD driver
>-#
>-CONFIG_RTE_LIBRTE_NFP_PMD=n
>-CONFIG_RTE_LIBRTE_NFP_DEBUG=n
>-
>-#
>-# Compile software PMD backed by SZEDATA2 device
>-#
>-CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
>-
>-#
>-# Compile burst-oriented VIRTIO PMD driver
>-#
>-CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
>-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_INIT=n
>-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
>-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
>-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DRIVER=n
>-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
>-
>-#
>-# Compile burst-oriented VMXNET3 PMD driver
>-#
>-CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
>-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_INIT=n
>-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
>-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
>-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
>-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_DRIVER=n
>-
>-#
>-# Compile example software rings based PMD
>-#
>-CONFIG_RTE_LIBRTE_PMD_RING=y
>-CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
>-CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
>-
>-#
>-# Compile software PMD backed by PCAP files
>-#
>-CONFIG_RTE_LIBRTE_PMD_PCAP=n
>-
>-#
>-# Compile link bonding PMD library
>-#
>-CONFIG_RTE_LIBRTE_PMD_BOND=y
>-CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
>-CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
>-
>-#
>-# Compile software PMD backed by AF_PACKET sockets (Linux only)
>-#
>-CONFIG_RTE_LIBRTE_PMD_AF_PACKET=y
>-
>-#
>-# Compile Xen PMD
>-#
>-CONFIG_RTE_LIBRTE_PMD_XENVIRT=n
>-
>-#
>-# Compile null PMD
>-#
>-CONFIG_RTE_LIBRTE_PMD_NULL=y
>-
>-#
>-# Do prefetch of packet data within PMD driver receive function
>-#
>-CONFIG_RTE_PMD_PACKET_PREFETCH=y
>-
>-#
>-# Compile generic crypto device library
>-# EXPERIMENTAL: API may change without prior notice
>-#
>-CONFIG_RTE_LIBRTE_CRYPTODEV=y
>-CONFIG_RTE_LIBRTE_CRYPTODEV_DEBUG=n
>-CONFIG_RTE_CRYPTO_MAX_DEVS=64
>-CONFIG_RTE_CRYPTODEV_NAME_LEN=64
>-
>-#
>-# Compile PMD for QuickAssist based devices
>-#
>-CONFIG_RTE_LIBRTE_PMD_QAT=n
>-CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_INIT=n
>-CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_TX=n
>-CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_RX=n
>-CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER=n
>-#
>-# Number of sessions to create in the session memory pool
>-# on a single QuickAssist device.
>-#
>-CONFIG_RTE_QAT_PMD_MAX_NB_SESSIONS=2048
>-
>-#
>-# Compile PMD for AESNI backed device
>-#
>-CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
>-CONFIG_RTE_LIBRTE_PMD_AESNI_MB_DEBUG=n
>-CONFIG_RTE_AESNI_MB_PMD_MAX_NB_QUEUE_PAIRS=8
>-CONFIG_RTE_AESNI_MB_PMD_MAX_NB_SESSIONS=2048
>-
>-#
>-# Compile librte_ring
>-#
>-CONFIG_RTE_LIBRTE_RING=y
>-CONFIG_RTE_LIBRTE_RING_DEBUG=n
>-CONFIG_RTE_RING_SPLIT_PROD_CONS=n
>-CONFIG_RTE_RING_PAUSE_REP_COUNT=0
>-
>-#
>-# Compile librte_mempool
>-#
>-CONFIG_RTE_LIBRTE_MEMPOOL=y
>-CONFIG_RTE_MEMPOOL_CACHE_MAX_SIZE=512
>-CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
>-
>-#
>-# Compile librte_mbuf
>-#
>-CONFIG_RTE_LIBRTE_MBUF=y
>-CONFIG_RTE_LIBRTE_MBUF_DEBUG=n
>-CONFIG_RTE_MBUF_REFCNT_ATOMIC=y
>-CONFIG_RTE_PKTMBUF_HEADROOM=128
>-
>-#
>-# Compile librte_mbuf_offload
>-# EXPERIMENTAL: API may change without prior notice
>-#
>-CONFIG_RTE_LIBRTE_MBUF_OFFLOAD=y
>-CONFIG_RTE_LIBRTE_MBUF_OFFLOAD_DEBUG=n
>-
>-#
>-# Compile librte_timer
>-#
>-CONFIG_RTE_LIBRTE_TIMER=y
>-CONFIG_RTE_LIBRTE_TIMER_DEBUG=n
>-
>-#
>-# Compile librte_cfgfile
>-#
>-CONFIG_RTE_LIBRTE_CFGFILE=y
>-
>-#
>-# Compile librte_cmdline
>-#
>-CONFIG_RTE_LIBRTE_CMDLINE=y
>-CONFIG_RTE_LIBRTE_CMDLINE_DEBUG=n
>-
>-#
>-# Compile librte_hash
>-#
>-CONFIG_RTE_LIBRTE_HASH=y
>-CONFIG_RTE_LIBRTE_HASH_DEBUG=n
>-
>-#
>-# Compile librte_jobstats
>-#
>-CONFIG_RTE_LIBRTE_JOBSTATS=y
>-
>-#
>-# Compile librte_lpm
>-#
>-CONFIG_RTE_LIBRTE_LPM=y
>-CONFIG_RTE_LIBRTE_LPM_DEBUG=n
>-
>-#
>-# Compile librte_acl
>-#
>-CONFIG_RTE_LIBRTE_ACL=y
>-CONFIG_RTE_LIBRTE_ACL_DEBUG=n
>-
>-#
>-# Compile librte_power
>-#
>-CONFIG_RTE_LIBRTE_POWER=y
>-CONFIG_RTE_LIBRTE_POWER_DEBUG=n
>-CONFIG_RTE_MAX_LCORE_FREQS=64
>-
>-#
>-# Compile librte_net
>-#
>-CONFIG_RTE_LIBRTE_NET=y
>-
>-#
>-# Compile librte_ip_frag
>-#
>-CONFIG_RTE_LIBRTE_IP_FRAG=y
>-CONFIG_RTE_LIBRTE_IP_FRAG_DEBUG=n
>-CONFIG_RTE_LIBRTE_IP_FRAG_MAX_FRAG=4
>-CONFIG_RTE_LIBRTE_IP_FRAG_TBL_STAT=n
>-
>-#
>-# Compile librte_meter
>-#
>-CONFIG_RTE_LIBRTE_METER=y
>-
>-#
>-# Compile librte_sched
>-#
>-CONFIG_RTE_LIBRTE_SCHED=y
>-CONFIG_RTE_SCHED_DEBUG=n
>-CONFIG_RTE_SCHED_RED=n
>-CONFIG_RTE_SCHED_COLLECT_STATS=n
>-CONFIG_RTE_SCHED_SUBPORT_TC_OV=n
>-CONFIG_RTE_SCHED_PORT_N_GRINDERS=8
>-CONFIG_RTE_SCHED_VECTOR=n
>-
>-#
>-# Compile the distributor library
>-#
>-CONFIG_RTE_LIBRTE_DISTRIBUTOR=y
>-
>-#
>-# Compile the reorder library
>-#
>-CONFIG_RTE_LIBRTE_REORDER=y
>-
>-#
>-# Compile librte_port
>-#
>-CONFIG_RTE_LIBRTE_PORT=y
>-CONFIG_RTE_PORT_STATS_COLLECT=n
>-
>-#
>-# Compile librte_table
>-#
>-CONFIG_RTE_LIBRTE_TABLE=y
>-CONFIG_RTE_TABLE_STATS_COLLECT=n
>-
>-#
>-# Compile librte_pipeline
>-#
>-CONFIG_RTE_LIBRTE_PIPELINE=y
>-CONFIG_RTE_PIPELINE_STATS_COLLECT=n
>-
>-#
>-# Compile librte_kni
>-#
>-CONFIG_RTE_LIBRTE_KNI=y
>-CONFIG_RTE_KNI_KMOD=y
>-CONFIG_RTE_KNI_PREEMPT_DEFAULT=y
>-CONFIG_RTE_KNI_KO_DEBUG=n
>-CONFIG_RTE_KNI_VHOST=n
>-CONFIG_RTE_KNI_VHOST_MAX_CACHE_SIZE=1024
>-CONFIG_RTE_KNI_VHOST_VNET_HDR_EN=n
>-CONFIG_RTE_KNI_VHOST_DEBUG_RX=n
>-CONFIG_RTE_KNI_VHOST_DEBUG_TX=n
>-
>-#
>-# Compile vhost library
>-# fuse-devel is needed to run vhost-cuse.
>-# fuse-devel enables user space char driver development
>-# vhost-user is turned on by default.
>-#
>-CONFIG_RTE_LIBRTE_VHOST=y
>-CONFIG_RTE_LIBRTE_VHOST_USER=y
>-CONFIG_RTE_LIBRTE_VHOST_NUMA=n
>-CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
>-
>-#
>-#Compile Xen domain0 support
>-#
>-CONFIG_RTE_LIBRTE_XEN_DOM0=n
>-
>-#
>-# Enable warning directives
>-#
>-CONFIG_RTE_INSECURE_FUNCTION_WARNING=n
>-
>-#
>-# Compile the test application
>-#
>-CONFIG_RTE_APP_TEST=y
>-
>-#
>-# Compile the PMD test application
>-#
>-CONFIG_RTE_TEST_PMD=y
>-CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
>-CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
>diff --git a/config/defconfig_x86_64-native-bsdapp-clang b/config/defconfig_x86_64-native-bsdapp-clang
>index d2baf2c..8b870b3 100644
>--- a/config/defconfig_x86_64-native-bsdapp-clang
>+++ b/config/defconfig_x86_64-native-bsdapp-clang
>@@ -37,6 +37,7 @@ CONFIG_RTE_MACHINE="native"
> CONFIG_RTE_ARCH="x86_64"
> CONFIG_RTE_ARCH_X86_64=y
> CONFIG_RTE_ARCH_X86=y
>+CONFIG_RTE_ARCH_64=y
> 
> CONFIG_RTE_TOOLCHAIN="clang"
> CONFIG_RTE_TOOLCHAIN_CLANG=y
>diff --git a/config/defconfig_x86_64-native-bsdapp-gcc b/config/defconfig_x86_64-native-bsdapp-gcc
>index 5a6a4e8..4ea4433 100644
>--- a/config/defconfig_x86_64-native-bsdapp-gcc
>+++ b/config/defconfig_x86_64-native-bsdapp-gcc
>@@ -37,6 +37,7 @@ CONFIG_RTE_MACHINE="native"
> CONFIG_RTE_ARCH="x86_64"
> CONFIG_RTE_ARCH_X86_64=y
> CONFIG_RTE_ARCH_X86=y
>+CONFIG_RTE_ARCH_64=y
> 
> CONFIG_RTE_TOOLCHAIN="gcc"
> CONFIG_RTE_TOOLCHAIN_GCC=y
>-- 
>2.7.0
>
>


Regards,
Keith
Previous message: [dpdk-dev] [PATCH v3 0/5] Implement missing features in mlx5
Next message: [dpdk-dev] [PATCH] config: remove duplicate configuration information
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the dev mailing list