[dpdk-dev] [PATCH v4 26/29] i40e/base: add AQ thermal sensor control struct

Helin Zhang helin.zhang at intel.com
Sun Mar 6 16:41:56 CET 2016


It adds the new AQ command and struct for managing a
thermal sensor.

Signed-off-by: Helin Zhang <helin.zhang at intel.com>
Acked-by: Jingjing Wu <jingjing.wu at intel.com>
---
 drivers/net/i40e/base/i40e_adminq_cmd.h | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/net/i40e/base/i40e_adminq_cmd.h b/drivers/net/i40e/base/i40e_adminq_cmd.h
index 12ebd35..5236333 100644
--- a/drivers/net/i40e/base/i40e_adminq_cmd.h
+++ b/drivers/net/i40e/base/i40e_adminq_cmd.h
@@ -250,6 +250,7 @@ enum i40e_admin_queue_opc {
 	i40e_aqc_opc_nvm_config_read		= 0x0704,
 	i40e_aqc_opc_nvm_config_write		= 0x0705,
 	i40e_aqc_opc_oem_post_update		= 0x0720,
+	i40e_aqc_opc_thermal_sensor		= 0x0721,
 
 	/* virtualization commands */
 	i40e_aqc_opc_send_msg_to_pf		= 0x0801,
@@ -2001,6 +2002,22 @@ struct i40e_aqc_nvm_oem_post_update_buffer {
 
 I40E_CHECK_STRUCT_LEN(0x28, i40e_aqc_nvm_oem_post_update_buffer);
 
+/* Thermal Sensor (indirect 0x0721)
+ *     read or set thermal sensor configs and values
+ *     takes a sensor and command specific data buffer, not detailed here
+ */
+struct i40e_aqc_thermal_sensor {
+	u8 sensor_action;
+#define I40E_AQ_THERMAL_SENSOR_READ_CONFIG	0
+#define I40E_AQ_THERMAL_SENSOR_SET_CONFIG	1
+#define I40E_AQ_THERMAL_SENSOR_READ_TEMP	2
+	u8 reserved[7];
+	__le32	addr_high;
+	__le32	addr_low;
+};
+
+I40E_CHECK_CMD_LENGTH(i40e_aqc_thermal_sensor);
+
 /* Send to PF command (indirect 0x0801) id is only used by PF
  * Send to VF command (indirect 0x0802) id is only used by PF
  * Send to Peer PF command (indirect 0x0803)
-- 
2.5.0



More information about the dev mailing list