[dpdk-dev] [PATCH 03/40] bnxt: add driver register/unregister support

Stephen Hurd stephen.hurd at broadcom.com
Fri May 6 21:25:43 CEST 2016


Move init() cleanup into uninit() function
Fix .dev_private_size
Add require hwrm calls:
	bnxt_hwrm_func_driver_register()
	bnxt_hwrm_func_driver_unregister()

Signed-off-by: Stephen Hurd <stephen.hurd at broadcom.com>
Reviewed-by: Ajit Kumar Khaparde <ajit.khaparde at broadcom.com>
---
 drivers/net/bnxt/bnxt.h                |   1 +
 drivers/net/bnxt/bnxt_ethdev.c         |  48 ++++--
 drivers/net/bnxt/bnxt_hwrm.c           |  50 ++++++
 drivers/net/bnxt/bnxt_hwrm.h           |   3 +
 drivers/net/bnxt/hsi_struct_def_dpdk.h | 277 ++++++++++++++++++++++++++++++++-
 5 files changed, 359 insertions(+), 20 deletions(-)

diff --git a/drivers/net/bnxt/bnxt.h b/drivers/net/bnxt/bnxt.h
index 0f816ed..ebddeab 100644
--- a/drivers/net/bnxt/bnxt.h
+++ b/drivers/net/bnxt/bnxt.h
@@ -91,6 +91,7 @@ struct bnxt {
 	struct rte_pci_device		*pdev;
 
 	uint32_t		flags;
+#define BNXT_FLAG_REGISTERED	(1<<0)
 #define BNXT_FLAG_VF		(1<<1)
 #define BNXT_PF(bp)		(!((bp)->flags & BNXT_FLAG_VF))
 #define BNXT_VF(bp)		((bp)->flags & BNXT_FLAG_VF)
diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c
index a74cc6c..07519df 100644
--- a/drivers/net/bnxt/bnxt_ethdev.c
+++ b/drivers/net/bnxt/bnxt_ethdev.c
@@ -52,20 +52,12 @@ static struct rte_pci_id bnxt_pci_id_map[] = {
 	{.device_id = 0},
 };
 
-static void bnxt_dev_close_op(struct rte_eth_dev *eth_dev)
-{
-	struct bnxt *bp = (struct bnxt *)eth_dev->data->dev_private;
-
-	rte_free(eth_dev->data->mac_addrs);
-	bnxt_free_hwrm_resources(bp);
-}
-
 /*
  * Initialization
  */
 
 static struct eth_dev_ops bnxt_dev_ops = {
-	.dev_close = bnxt_dev_close_op,
+0
 };
 
 static bool bnxt_vf_pciid(uint16_t id)
@@ -123,7 +115,8 @@ bnxt_dev_init(struct rte_eth_dev *eth_dev)
 			eth_dev->pci_dev->addr.function < 4) {
 		RTE_LOG(ERR, PMD, "Function not enabled %x:\n",
 			eth_dev->pci_dev->addr.function);
-		return -ENOMEM;
+		rc = -ENOMEM;
+		goto error;
 	}
 
 	rte_eth_copy_pci_info(eth_dev, eth_dev->pci_dev);
@@ -148,11 +141,11 @@ bnxt_dev_init(struct rte_eth_dev *eth_dev)
 	if (rc) {
 		RTE_LOG(ERR, PMD,
 			"hwrm resource allocation failure rc: %x\n", rc);
-		goto error;
+		goto error_free;
 	}
 	rc = bnxt_hwrm_ver_get(bp);
 	if (rc)
-		goto error;
+		goto error_free;
 	bnxt_hwrm_queue_qportcfg(bp);
 
 	/* Get the MAX capabilities for this function */
@@ -177,17 +170,38 @@ bnxt_dev_init(struct rte_eth_dev *eth_dev)
 		memcpy(bp->mac_addr, bp->vf.mac_addr, sizeof(bp->mac_addr));
 	memcpy(&eth_dev->data->mac_addrs[0], bp->mac_addr, ETHER_ADDR_LEN);
 
-	return -EPERM;
+	rc = bnxt_hwrm_func_driver_register(bp, 0,
+					    bp->pf.vf_req_fwd);
+	if (rc) {
+		RTE_LOG(ERR, PMD,
+			"Failed to register driver");
+		rc = -EBUSY;
+		goto error_free;
+	}
+
+	RTE_LOG(INFO, PMD,
+		DRV_MODULE_NAME " found at mem %" PRIx64 ", node addr %pM\n",
+		eth_dev->pci_dev->mem_resource[0].phys_addr,
+		eth_dev->pci_dev->mem_resource[0].addr);
+
+	return 0;
 
 error_free:
-	bnxt_dev_close_op(eth_dev);
+	eth_dev->driver->eth_dev_uninit(eth_dev);
 error:
 	return rc;
 }
 
 static int
-bnxt_dev_uninit(struct rte_eth_dev *eth_dev __rte_unused) {
-	return 0;
+bnxt_dev_uninit(struct rte_eth_dev *eth_dev) {
+	struct bnxt *bp = eth_dev->data->dev_private;
+	int rc;
+
+	if (eth_dev->data->mac_addrs)
+		rte_free(eth_dev->data->mac_addrs);
+	rc = bnxt_hwrm_func_driver_unregister(bp, 0);
+	bnxt_free_hwrm_resources(bp);
+	return rc;
 }
 
 static struct eth_driver bnxt_rte_pmd = {
@@ -198,7 +212,7 @@ static struct eth_driver bnxt_rte_pmd = {
 		    },
 	.eth_dev_init = bnxt_dev_init,
 	.eth_dev_uninit = bnxt_dev_uninit,
-	.dev_private_size = 32 /* this must be non-zero apparently */,
+	.dev_private_size = sizeof(struct bnxt),
 };
 
 static int bnxt_rte_pmd_init(const char *name, const char *params __rte_unused)
diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c
index 5b66721..398f0f5 100644
--- a/drivers/net/bnxt/bnxt_hwrm.c
+++ b/drivers/net/bnxt/bnxt_hwrm.c
@@ -36,6 +36,7 @@
 #include <rte_cycles.h>
 #include <rte_malloc.h>
 #include <rte_memzone.h>
+#include <rte_version.h>
 
 #include "bnxt.h"
 #include "bnxt_hwrm.h"
@@ -178,6 +179,34 @@ int bnxt_hwrm_func_qcaps(struct bnxt *bp)
 	return rc;
 }
 
+int bnxt_hwrm_func_driver_register(struct bnxt *bp, uint32_t flags,
+				   uint32_t *vf_req_fwd)
+{
+	int rc;
+	struct hwrm_func_drv_rgtr_input req = {.req_type = 0 };
+	struct hwrm_func_drv_rgtr_output *resp = bp->hwrm_cmd_resp_addr;
+
+	if (bp->flags & BNXT_FLAG_REGISTERED)
+		return 0;
+
+	HWRM_PREP(req, FUNC_DRV_RGTR, -1, resp);
+	req.flags = flags;
+	req.enables = HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_VER;
+	req.ver_maj = RTE_VER_YEAR;
+	req.ver_min = RTE_VER_MONTH;
+	req.ver_upd = RTE_VER_MINOR;
+
+	memcpy(req.vf_req_fwd, vf_req_fwd, sizeof(req.vf_req_fwd));
+
+	rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+
+	HWRM_CHECK_RESULT;
+
+	bp->flags |= BNXT_FLAG_REGISTERED;
+
+	return rc;
+}
+
 int bnxt_hwrm_ver_get(struct bnxt *bp)
 {
 	int rc = 0;
@@ -264,6 +293,27 @@ error:
 	return rc;
 }
 
+int bnxt_hwrm_func_driver_unregister(struct bnxt *bp, uint32_t flags)
+{
+	int rc;
+	struct hwrm_func_drv_unrgtr_input req = {.req_type = 0 };
+	struct hwrm_func_drv_unrgtr_output *resp = bp->hwrm_cmd_resp_addr;
+
+	if (!(bp->flags & BNXT_FLAG_REGISTERED))
+		return 0;
+
+	HWRM_PREP(req, FUNC_DRV_UNRGTR, -1, resp);
+	req.flags = flags;
+
+	rc = bnxt_hwrm_send_message(bp, &req, sizeof(req));
+
+	HWRM_CHECK_RESULT;
+
+	bp->flags &= ~BNXT_FLAG_REGISTERED;
+
+	return rc;
+}
+
 int bnxt_hwrm_queue_qportcfg(struct bnxt *bp)
 {
 	int rc = 0;
diff --git a/drivers/net/bnxt/bnxt_hwrm.h b/drivers/net/bnxt/bnxt_hwrm.h
index e35e8c0..6f2e445 100644
--- a/drivers/net/bnxt/bnxt_hwrm.h
+++ b/drivers/net/bnxt/bnxt_hwrm.h
@@ -41,7 +41,10 @@
 
 #define HWRM_SEQ_ID_INVALID -1U
 
+int bnxt_hwrm_func_driver_register(struct bnxt *bp, uint32_t flags,
+				   uint32_t *vf_req_fwd);
 int bnxt_hwrm_func_qcaps(struct bnxt *bp);
+int bnxt_hwrm_func_driver_unregister(struct bnxt *bp, uint32_t flags);
 
 int bnxt_hwrm_queue_qportcfg(struct bnxt *bp);
 
diff --git a/drivers/net/bnxt/hsi_struct_def_dpdk.h b/drivers/net/bnxt/hsi_struct_def_dpdk.h
index 1667927..be3ed0f 100644
--- a/drivers/net/bnxt/hsi_struct_def_dpdk.h
+++ b/drivers/net/bnxt/hsi_struct_def_dpdk.h
@@ -50,9 +50,11 @@
 /*
  * Request types
  */
-#define HWRM_VER_GET                                      (UINT32_C(0x0))
-#define HWRM_FUNC_QCAPS                                   (UINT32_C(0x15))
-#define HWRM_QUEUE_QPORTCFG                               (UINT32_C(0x30))
+#define HWRM_VER_GET		(UINT32_C(0x0))
+#define HWRM_FUNC_QCAPS		(UINT32_C(0x15))
+#define HWRM_FUNC_DRV_UNRGTR	(UINT32_C(0x1a))
+#define HWRM_FUNC_DRV_RGTR	(UINT32_C(0x1d))
+#define HWRM_QUEUE_QPORTCFG	(UINT32_C(0x30))
 
 /*
  * Note: The Hardware Resource Manager (HWRM) manages various hardware resources
@@ -951,4 +953,273 @@ struct hwrm_queue_qportcfg_output {
 	uint8_t valid;
 } __attribute__((packed));
 
+/* hwrm_func_drv_rgtr */
+/*
+ * Description: This command is used by the function driver to register its
+ * information with the HWRM. A function driver shall implement this command. A
+ * function driver shall use this command during the driver initialization right
+ * after the HWRM version discovery and default ring resources allocation.
+ */
+
+/* Input (80 bytes) */
+struct hwrm_func_drv_rgtr_input {
+	/*
+	 * This value indicates what type of request this is. The format for the
+	 * rest of the command is determined by this field.
+	 */
+	uint16_t req_type;
+
+	/*
+	 * This value indicates the what completion ring the request will be
+	 * optionally completed on. If the value is -1, then no CR completion
+	 * will be generated. Any other value must be a valid CR ring_id value
+	 * for this function.
+	 */
+	uint16_t cmpl_ring;
+
+	/* This value indicates the command sequence number. */
+	uint16_t seq_id;
+
+	/*
+	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+	 * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+	 */
+	uint16_t target_id;
+
+	/*
+	 * This is the host address where the response will be written when the
+	 * request is complete. This area must be 16B aligned and must be
+	 * cleared to zero before the request is made.
+	 */
+	uint64_t resp_addr;
+
+	/*
+	 * When this bit is '1', the function driver is requesting all requests
+	 * from its children VF drivers to be forwarded to itself. This flag can
+	 * only be set by the PF driver. If a VF driver sets this flag, it
+	 * should be ignored by the HWRM.
+	 */
+	#define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FWD_ALL_MODE        UINT32_C(0x1)
+	/*
+	 * When this bit is '1', the function is requesting none of the requests
+	 * from its children VF drivers to be forwarded to itself. This flag can
+	 * only be set by the PF driver. If a VF driver sets this flag, it
+	 * should be ignored by the HWRM.
+	 */
+	#define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FWD_NONE_MODE       UINT32_C(0x2)
+	uint32_t flags;
+
+	/* This bit must be '1' for the os_type field to be configured. */
+	#define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_OS_TYPE           UINT32_C(0x1)
+	/* This bit must be '1' for the ver field to be configured. */
+	#define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_VER               UINT32_C(0x2)
+	/* This bit must be '1' for the timestamp field to be configured. */
+	#define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_TIMESTAMP         UINT32_C(0x4)
+	/* This bit must be '1' for the vf_req_fwd field to be configured. */
+	#define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_VF_REQ_FWD        UINT32_C(0x8)
+	/*
+	 * This bit must be '1' for the async_event_fwd field to be configured.
+	 */
+	#define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_ASYNC_EVENT_FWD \
+								UINT32_C(0x10)
+	uint32_t enables;
+
+	/* This value indicates the type of OS. */
+		/* Unknown */
+	#define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_UNKNOWN \
+							(UINT32_C(0x0) << 0)
+		/* Other OS not listed below. */
+	#define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_OTHER \
+							(UINT32_C(0x1) << 0)
+		/* MSDOS OS. */
+	#define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_MSDOS \
+							(UINT32_C(0xe) << 0)
+		/* Windows OS. */
+	#define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WINDOWS \
+							(UINT32_C(0x12) << 0)
+		/* Solaris OS. */
+	#define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_SOLARIS \
+							(UINT32_C(0x1d) << 0)
+		/* Linux OS. */
+	#define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_LINUX \
+							(UINT32_C(0x24) << 0)
+		/* FreeBSD OS. */
+	#define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_FREEBSD \
+							(UINT32_C(0x2a) << 0)
+		/* VMware ESXi OS. */
+	#define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_ESXI \
+							(UINT32_C(0x68) << 0)
+		/* Microsoft Windows 8 64-bit OS. */
+	#define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WIN864 \
+							(UINT32_C(0x73) << 0)
+		/* Microsoft Windows Server 2012 R2 OS. */
+	#define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WIN2012R2 \
+							(UINT32_C(0x74) << 0)
+	uint16_t os_type;
+
+	/* This is the major version of the driver. */
+	uint8_t ver_maj;
+
+	/* This is the minor version of the driver. */
+	uint8_t ver_min;
+
+	/* This is the update version of the driver. */
+	uint8_t ver_upd;
+
+	uint8_t unused_0;
+	uint16_t unused_1;
+
+	/*
+	 * This is a 32-bit timestamp provided by the driver for keep alive. The
+	 * timestamp is in multiples of 1ms.
+	 */
+	uint32_t timestamp;
+
+	uint32_t unused_2;
+
+	/*
+	 * This is a 256-bit bit mask provided by the PF driver for letting the
+	 * HWRM know what commands issued by the VF driver to the HWRM should be
+	 * forwarded to the PF driver. Nth bit refers to the Nth req_type.
+	 * Setting Nth bit to 1 indicates that requests from the VF driver with
+	 * req_type equal to N shall be forwarded to the parent PF driver. This
+	 * field is not valid for the VF driver.
+	 */
+	uint32_t vf_req_fwd[8];
+
+	/*
+	 * This is a 256-bit bit mask provided by the function driver (PF or VF
+	 * driver) to indicate the list of asynchronous event completions to be
+	 * forwarded. Nth bit refers to the Nth event_id. Setting Nth bit to 1
+	 * by the function driver shall result in the HWRM forwarding
+	 * asynchronous event completion with event_id equal to N. If all bits
+	 * are set to 0 (value of 0), then the HWRM shall not forward any
+	 * asynchronous event completion to this function driver.
+	 */
+	uint32_t async_event_fwd[8];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_func_drv_rgtr_output {
+	/*
+	 * Pass/Fail or error type Note: receiver to verify the in parameters,
+	 * and fail the call with an error when appropriate
+	 */
+	uint16_t error_code;
+
+	/* This field returns the type of original request. */
+	uint16_t req_type;
+
+	/* This field provides original sequence number of the command. */
+	uint16_t seq_id;
+
+	/*
+	 * This field is the length of the response in bytes. The last byte of
+	 * the response is a valid flag that will read as '1' when the command
+	 * has been completely written to memory.
+	 */
+	uint16_t resp_len;
+
+	uint32_t unused_0;
+	uint8_t unused_1;
+	uint8_t unused_2;
+	uint8_t unused_3;
+
+	/*
+	 * This field is used in Output records to indicate that the output is
+	 * completely written to RAM. This field should be read as '1' to
+	 * indicate that the output has been completely written. When writing a
+	 * command completion or response to an internal processor, the order of
+	 * writes has to be such that this field is written last.
+	 */
+	uint8_t valid;
+} __attribute__((packed));
+
+/* hwrm_func_drv_unrgtr */
+/*
+ * Description: This command is used by the function driver to un register with
+ * the HWRM. A function driver shall implement this command. A function driver
+ * shall use this command during the driver unloading.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_func_drv_unrgtr_input {
+	/*
+	 * This value indicates what type of request this is. The format for the
+	 * rest of the command is determined by this field.
+	 */
+	uint16_t req_type;
+
+	/*
+	 * This value indicates the what completion ring the request will be
+	 * optionally completed on. If the value is -1, then no CR completion
+	 * will be generated. Any other value must be a valid CR ring_id value
+	 * for this function.
+	 */
+	uint16_t cmpl_ring;
+
+	/* This value indicates the command sequence number. */
+	uint16_t seq_id;
+
+	/*
+	 * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+	 * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+	 */
+	uint16_t target_id;
+
+	/*
+	 * This is the host address where the response will be written when the
+	 * request is complete. This area must be 16B aligned and must be
+	 * cleared to zero before the request is made.
+	 */
+	uint64_t resp_addr;
+
+	/*
+	 * When this bit is '1', the function driver is notifying the HWRM to
+	 * prepare for the shutdown.
+	 */
+	#define HWRM_FUNC_DRV_UNRGTR_INPUT_FLAGS_PREPARE_FOR_SHUTDOWN \
+							UINT32_C(0x1)
+	uint32_t flags;
+
+	uint32_t unused_0;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_func_drv_unrgtr_output {
+	/*
+	 * Pass/Fail or error type Note: receiver to verify the in parameters,
+	 * and fail the call with an error when appropriate
+	 */
+	uint16_t error_code;
+
+	/* This field returns the type of original request. */
+	uint16_t req_type;
+
+	/* This field provides original sequence number of the command. */
+	uint16_t seq_id;
+
+	/*
+	 * This field is the length of the response in bytes. The last byte of
+	 * the response is a valid flag that will read as '1' when the command
+	 * has been completely written to memory.
+	 */
+	uint16_t resp_len;
+
+	uint32_t unused_0;
+	uint8_t unused_1;
+	uint8_t unused_2;
+	uint8_t unused_3;
+
+	/*
+	 * This field is used in Output records to indicate that the output is
+	 * completely written to RAM. This field should be read as '1' to
+	 * indicate that the output has been completely written. When writing a
+	 * command completion or response to an internal processor, the order of
+	 * writes has to be such that this field is written last.
+	 */
+	uint8_t valid;
+} __attribute__((packed));
+
 #endif
-- 
1.9.1



More information about the dev mailing list