[dpdk-dev] [PATCH] i40evf: add set maximum frame size support

[Ferruh Yigit]

On 11/25/2016 8:47 PM, Michael Bieniek wrote:
> This adds the ability to set maximum frame size for an i40e virtual
> interface. This patch is based on the i40e physical function maximum
> frame size implementation. This was tested on an system configured with
> multiple i40e virtual functions. Verified that the MTU was configurable
> and that sending packets greater than the configured MTU resulted in a
> drop.
> 
> Signed-off-by: Michael Bieniek <michaelbieniekdpdk at gmail.com>

Hi Michael,

I guess this is the first patch, welcome to the DPDK community.

> ---
>  drivers/net/i40e/i40e_ethdev_vf.c | 33 +++++++++++++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
> 
> diff --git a/drivers/net/i40e/i40e_ethdev_vf.c b/drivers/net/i40e/i40e_ethdev_vf.c
> index aa306d6..8477c98 100644
> --- a/drivers/net/i40e/i40e_ethdev_vf.c
> +++ b/drivers/net/i40e/i40e_ethdev_vf.c
> @@ -158,6 +158,7 @@ i40evf_dev_rx_queue_intr_disable(struct rte_eth_dev *dev, uint16_t queue_id);
>  static void i40evf_handle_pf_event(__rte_unused struct rte_eth_dev *dev,
>  				   uint8_t *msg,
>  				   uint16_t msglen);
> +static int i40evf_dev_mtu_set(struct rte_eth_dev *dev, uint16_t);

This is not something functional but, in declaration, if you used
parameter name for first argument, let's use parameter name for second too.

>  
>  /* Default hash key buffer for RSS */
>  static uint32_t rss_key_default[I40E_VFQF_HKEY_MAX_INDEX + 1];
> @@ -225,6 +226,7 @@ static const struct eth_dev_ops i40evf_eth_dev_ops = {
>  	.reta_query           = i40evf_dev_rss_reta_query,
>  	.rss_hash_update      = i40evf_dev_rss_hash_update,
>  	.rss_hash_conf_get    = i40evf_dev_rss_hash_conf_get,
> +	.mtu_set              = i40evf_dev_mtu_set,
>  };
>  
>  /*
> @@ -2635,3 +2637,34 @@ i40evf_dev_rss_hash_conf_get(struct rte_eth_dev *dev,
>  
>  	return 0;
>  }
> +
> +static int
> +i40evf_dev_mtu_set(struct rte_eth_dev *dev, uint16_t mtu)
> +{
> +	struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);

hw is not used, and causing a build error.

> +	struct rte_eth_dev_data *dev_data = dev->data;
> +	uint32_t frame_size = mtu + ETHER_HDR_LEN
> +			      + ETHER_CRC_LEN + I40E_VLAN_TAG_SIZE;
> +	int ret = 0;
> +
> +	/* check if mtu is within the allowed range */
> +	if ((mtu < ETHER_MIN_MTU) || (frame_size > I40E_FRAME_SIZE_MAX))
> +		return -EINVAL;
> +
> +	/* mtu setting is forbidden if port is started */
> +	if (dev_data->dev_started) {
> +		PMD_DRV_LOG(ERR,
> +			    "port %d must be stopped before configuration\n",
> +			    dev_data->port_id);
> +		return -EBUSY;
> +	}
> +
> +	if (frame_size > ETHER_MAX_LEN)
> +		dev_data->dev_conf.rxmode.jumbo_frame = 1;
> +	else
> +		dev_data->dev_conf.rxmode.jumbo_frame = 0;
> +
> +	dev_data->dev_conf.rxmode.max_rx_pkt_len = frame_size;
> +
> +	return ret;
> +}
>