[dpdk-dev] [PATCH v2] net/ixgbe: support multiqueue mode VMDq DCB with SRIOV
Lu, Wenzhuo
wenzhuo.lu at intel.com
Mon Oct 17 08:12:00 CEST 2016
Hi Bernard, Rahul,
> -----Original Message-----
> From: Iremonger, Bernard
> Sent: Friday, October 14, 2016 9:29 PM
> To: dev at dpdk.org; Shah, Rahul R; Lu, Wenzhuo
> Cc: Iremonger, Bernard
> Subject: [PATCH v2] net/ixgbe: support multiqueue mode VMDq DCB with SRIOV
>
> modify ixgbe_dcb_tx_hw_config function.
> modify ixgbe_dev_mq_rx_configure function.
> modify ixgbe_configure_dcb function.
Would you like to add more details about why we need to modify these functions and what has been done? Thanks.
>
> Changes in v2:
> Rebased to DPDK v16.11-rc1
>
> Signed-off-by: Rahul R Shah <rahul.r.shah at intel.com>
> Signed-off-by: Bernard Iremonger <bernard.iremonger at intel.com>
> ---
> drivers/net/ixgbe/ixgbe_ethdev.c | 9 ++++-----
> drivers/net/ixgbe/ixgbe_rxtx.c | 37 +++++++++++++++++++++----------------
> 2 files changed, 25 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
> index 4ca5747..114698d 100644
> --- a/drivers/net/ixgbe/ixgbe_ethdev.c
> +++ b/drivers/net/ixgbe/ixgbe_ethdev.c
> @@ -1977,6 +1977,8 @@ ixgbe_check_mq_mode(struct rte_eth_dev *dev)
> /* check multi-queue mode */
> switch (dev_conf->rxmode.mq_mode) {
> case ETH_MQ_RX_VMDQ_DCB:
Should we store the mq mode here?
> + PMD_INIT_LOG(INFO, "ETH_MQ_RX_VMDQ_DCB
> mode supported in SRIOV");
> + break;
> case ETH_MQ_RX_VMDQ_DCB_RSS:
> /* DCB/RSS VMDQ in SRIOV mode, not implement yet
> */
> PMD_INIT_LOG(ERR, "SRIOV active,"
> @@ -2012,11 +2014,8 @@ ixgbe_check_mq_mode(struct rte_eth_dev *dev)
>
> switch (dev_conf->txmode.mq_mode) {
> case ETH_MQ_TX_VMDQ_DCB:
> - /* DCB VMDQ in SRIOV mode, not implement yet */
> - PMD_INIT_LOG(ERR, "SRIOV is active,"
> - " unsupported VMDQ mq_mode
> tx %d.",
> - dev_conf->txmode.mq_mode);
> - return -EINVAL;
> + PMD_INIT_LOG(INFO, "ETH_MQ_TX_VMDQ_DCB mode
> supported in SRIOV");
> + break;
> default: /* ETH_MQ_TX_VMDQ_ONLY or ETH_MQ_TX_NONE
> */
> dev->data->dev_conf.txmode.mq_mode =
> ETH_MQ_TX_VMDQ_ONLY;
> break;
> diff --git a/drivers/net/ixgbe/ixgbe_rxtx.c b/drivers/net/ixgbe/ixgbe_rxtx.c index
> 2ce8234..bb13889 100644
> --- a/drivers/net/ixgbe/ixgbe_rxtx.c
> +++ b/drivers/net/ixgbe/ixgbe_rxtx.c
> @@ -1,7 +1,7 @@
> /*-
> * BSD LICENSE
> *
> - * Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
> + * Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
> * Copyright 2014 6WIND S.A.
> * All rights reserved.
> *
> @@ -3313,15 +3313,16 @@ ixgbe_vmdq_dcb_configure(struct rte_eth_dev
> *dev)
>
> /**
> * ixgbe_dcb_config_tx_hw_config - Configure general DCB TX parameters
> - * @hw: pointer to hardware structure
> + * @dev: pointer to eth_dev structure
> * @dcb_config: pointer to ixgbe_dcb_config structure
> */
> static void
> -ixgbe_dcb_tx_hw_config(struct ixgbe_hw *hw,
> +ixgbe_dcb_tx_hw_config(struct rte_eth_dev *dev,
> struct ixgbe_dcb_config *dcb_config) {
> uint32_t reg;
> uint32_t q;
> + struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data-
> >dev_private);
>
> PMD_INIT_FUNC_TRACE();
> if (hw->mac.type != ixgbe_mac_82598EB) { @@ -3339,11 +3340,17 @@
> ixgbe_dcb_tx_hw_config(struct ixgbe_hw *hw,
> if (dcb_config->vt_mode)
> reg |= IXGBE_MTQC_VT_ENA;
> IXGBE_WRITE_REG(hw, IXGBE_MTQC, reg);
> -
> - /* Disable drop for all queues */
> - for (q = 0; q < 128; q++)
> - IXGBE_WRITE_REG(hw, IXGBE_QDE,
> - (IXGBE_QDE_WRITE | (q <<
> IXGBE_QDE_IDX_SHIFT)));
> + if (RTE_ETH_DEV_SRIOV(dev).active == 0) {
> + /* Disable drop for all queues in VMDQ mode*/
> + for (q = 0; q < 128; q++)
> + IXGBE_WRITE_REG(hw, IXGBE_QDE,
> + (IXGBE_QDE_WRITE | (q <<
> IXGBE_QDE_IDX_SHIFT) | IXGBE_QDE_ENABLE));
> + } else {
> + /* Enable drop for all queues in SRIOV mode */
> + for (q = 0; q < 128; q++)
> + IXGBE_WRITE_REG(hw, IXGBE_QDE,
> + (IXGBE_QDE_WRITE | (q <<
> IXGBE_QDE_IDX_SHIFT)));
> + }
I think it has nothing to do with mq mode. Do I miss something?
>
> /* Enable the Tx desc arbiter */
> reg = IXGBE_READ_REG(hw, IXGBE_RTTDCS); @@ -3378,7
> +3385,7 @@ ixgbe_vmdq_dcb_hw_tx_config(struct rte_eth_dev *dev,
> vmdq_tx_conf->nb_queue_pools == ETH_16_POOLS ?
> 0xFFFF : 0xFFFFFFFF);
>
> /*Configure general DCB TX parameters*/
> - ixgbe_dcb_tx_hw_config(hw, dcb_config);
> + ixgbe_dcb_tx_hw_config(dev, dcb_config);
> }
>
> static void
> @@ -3661,7 +3668,7 @@ ixgbe_dcb_hw_configure(struct rte_eth_dev *dev,
> /*get DCB TX configuration parameters from rte_eth_conf*/
> ixgbe_dcb_tx_config(dev, dcb_config);
> /*Configure general DCB TX parameters*/
> - ixgbe_dcb_tx_hw_config(hw, dcb_config);
> + ixgbe_dcb_tx_hw_config(dev, dcb_config);
> break;
> default:
> PMD_INIT_LOG(ERR, "Incorrect DCB TX mode configuration");
> @@ -3810,9 +3817,6 @@ void ixgbe_configure_dcb(struct rte_eth_dev *dev)
> (dev_conf->rxmode.mq_mode != ETH_MQ_RX_DCB_RSS))
> return;
>
> - if (dev->data->nb_rx_queues != ETH_DCB_NUM_QUEUES)
> - return;
I remember it's a limitation of implementation. The reason is the resource allocation. Why could we remove it now?
> -
> /** Configure DCB hardware **/
> ixgbe_dcb_hw_configure(dev, dcb_cfg);
> }
> @@ -4082,12 +4086,13 @@ ixgbe_dev_mq_rx_configure(struct rte_eth_dev
> *dev)
> case ETH_MQ_RX_VMDQ_RSS:
> ixgbe_config_vf_rss(dev);
> break;
> -
> - /* FIXME if support DCB/RSS together with VMDq & SRIOV */
> case ETH_MQ_RX_VMDQ_DCB:
> + ixgbe_vmdq_dcb_configure(dev);
> + break;
> + /* FIXME if support DCB/RSS together with VMDq & SRIOV */
> case ETH_MQ_RX_VMDQ_DCB_RSS:
> PMD_INIT_LOG(ERR,
> - "Could not support DCB with VMDq & SRIOV");
> + "Could not support DCB/RSS with VMDq &
> SRIOV");
> return -1;
> default:
> ixgbe_config_vf_default(dev);
> --
> 2.10.1
More information about the dev
mailing list